Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sergiu Moga <sergiu.moga@microchip.com>
To:     <lee@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <nicolas.ferre@microchip.com>,
        <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
        <radu_nicolae.pirea@upb.ro>, <richard.genoud@gmail.com>,
        <mturquette@baylibre.com>, <sboyd@kernel.org>,
        <gregkh@linuxfoundation.org>, <jirislaby@kernel.org>,
        <admin@hifiphile.com>, <kavyasree.kotagiri@microchip.com>
CC:     <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>,
        <linux-clk@vger.kernel.org>, <linux-serial@vger.kernel.org>,
        Sergiu Moga <sergiu.moga@microchip.com>
Subject: [PATCH 4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART
Date:   Wed, 17 Aug 2022 10:55:17 +0300
Message-ID: <20220817075517.49575-5-sergiu.moga@microchip.com>
In-Reply-To: <20220817075517.49575-1-sergiu.moga@microchip.com>
References: <20220817075517.49575-1-sergiu.moga@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Add the generic clocks for UART/USART in the sama5d2 driver to allow them
to be registered in the Common Clock Framework.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---
 drivers/clk/at91/sama5d2.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index cfd0f5e23b99..84156dc52bff 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -120,6 +120,16 @@ static const struct {
 	struct clk_range r;
 	int chg_pid;
 } sama5d2_gck[] = {
+	{ .n = "flx0_gclk",   .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx1_gclk",   .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx2_gclk",   .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx3_gclk",   .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx4_gclk",   .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart0_gclk",  .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart1_gclk",  .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart2_gclk",  .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart3_gclk",  .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart4_gclk",  .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
 	{ .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, },
 	{ .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, },
 	{ .n = "tcb0_gclk",   .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
-- 
2.25.1