Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 17 Aug 2022 12:04:13 +0300
From:   Ivan Bornyakov <i.bornyakov@metrotek.ru>
To:     Xu Yilun <yilun.xu@intel.com>
Cc:     mdf@kernel.org, hao.wu@intel.com, trix@redhat.com, dg@emlix.com,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        linux-fpga@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, system@metrotek.ru
Subject: Re: [PATCH v6 1/2] fpga: ecp5-spi: add Lattice ECP5 FPGA manager
Message-ID: <20220817090413.ywf7wescwj2manif@x260>
References: <20220815132157.8083-1-i.bornyakov@metrotek.ru>
 <20220815132157.8083-2-i.bornyakov@metrotek.ru>
 <Yvr6SY5WGXlYiLig@yilunxu-OptiPlex-7050>
 <20220816045841.irhr5vigemdqknaw@x260>
 <Yvs0jieXsyzhn8q9@yilunxu-OptiPlex-7050>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <Yvs0jieXsyzhn8q9@yilunxu-OptiPlex-7050>
Precedence: bulk

On Tue, Aug 16, 2022 at 02:09:18PM +0800, Xu Yilun wrote:
> On 2022-08-16 at 07:58:41 +0300, Ivan Bornyakov wrote:
> > On Tue, Aug 16, 2022 at 10:00:41AM +0800, Xu Yilun wrote:
> > > On 2022-08-15 at 16:21:56 +0300, Ivan Bornyakov wrote:
> > > > Add support to the FPGA manager for programming Lattice ECP5 FPGA over
> > > > slave SPI interface with .bit formatted uncompressed bitstream image.
> > > 
> > > Not sure if something is missed.
> > > 
> > > https://lore.kernel.org/all/20220729145757.GA2601292@yilunxu-OptiPlex-7050/
> > > 
> > > I was considering if a generic driver for lattice slave SPI sysCONFIG
> > > interface could be introduced. From machxo2 & ecp5 Programming Usage
> > > Guide, or others in this series, they basically use the same reconfigure
> > > interface & protocol.
> > > 
> > > Thanks,
> > > Yilun
> > > 
> > 
> > I only have HW with ECP5, can't vouch for the rest.
> 
> I understand your concern, but having separate drivers for the same IP on
> different boards makes the maintaining harder.
> 
> We don't have to make everything fine, but start with machxo2 and ecp5
> first. If the change affects machxo2, other people may help.
> 
> Thanks,
> Yilun
> 

Hi, Yilun.

To clear things out, considering what Daniel said in
https://lore.kernel.org/linux-fpga/20220816074216.GA31706@homes.emlix.com/
you still don't want separate ECP5 driver, or this v6 is OK and review
continues?