Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RFT PATCH v2 12/14] arm64: dts: qcom: qcs404: switch TCSR mutex to MMIO
Date:   Wed, 17 Aug 2022 16:03:40 +0300
Message-Id: <20220817130342.568396-13-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220817130342.568396-1-krzysztof.kozlowski@linaro.org>
References: <20220817130342.568396-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property
  qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9ab990061522..3a94eb2cc448 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -295,12 +295,6 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	soc: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -726,9 +720,10 @@ gcc: clock-controller@1800000 {
 			assigned-clock-rates = <19200000>;
 		};
 
-		tcsr_mutex_regs: syscon@1905000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@1937000 {
-- 
2.34.1