Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RFT PATCH v3 02/16] arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex
Date:   Fri, 19 Aug 2022 11:31:55 +0300
Message-Id: <20220819083209.50844-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220819083209.50844-1-krzysztof.kozlowski@linaro.org>
References: <20220819083209.50844-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 742eac4ce9b3..3411ced96db6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -359,7 +359,7 @@ opp-2150400000 {
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8996", "qcom,scm";
-			qcom,dload-mode = <&tcsr 0x13000>;
+			qcom,dload-mode = <&tcsr_2 0x13000>;
 		};
 	};
 
@@ -840,10 +840,15 @@ pnoc: interconnect@5c0000 {
 
 		tcsr_mutex_regs: syscon@740000 {
 			compatible = "syscon";
-			reg = <0x00740000 0x40000>;
+			reg = <0x00740000 0x20000>;
 		};
 
-		tcsr: syscon@7a0000 {
+		tcsr_1: sycon@760000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x00760000 0x20000>;
+		};
+
+		tcsr_2: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
 			reg = <0x007a0000 0x18000>;
 		};
@@ -2413,7 +2418,7 @@ mss_pil: remoteproc@2080000 {
 			qcom,smem-states = <&mpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
 
 			status = "disabled";
 
-- 
2.34.1