Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Conor Dooley <conor.dooley@microchip.com>
To:     Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Conor Dooley <conor.dooley@microchip.com>,
        Daire McNamara <daire.mcnamara@microchip.com>,
        Hugh Breslin <hugh.breslin@microchip.com>
CC:     Paul Walmsley <paul.walmsley@sifive.com>,
        Albert Ou <aou@eecs.berkeley.edu>, <linux-clk@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-riscv@lists.infradead.org>
Subject: [PATCH v2 0/6] Add PolarFire SoC Fabric Clock Conditioning Circuitry Support
Date:   Mon, 22 Aug 2022 12:29:23 +0100
Message-ID: <20220822112928.2727437-1-conor.dooley@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hey all,

PolarFire SoC has 4 clock source blocks, each with 2 PLLs and 2 DLLs,
in the corners of the FPGA fabric. Add bindings, a driver supporting
the PLLs and the requisite changes to the devicetrees for PolarFire
SoC based boards. These clocks were already in use, but which clock
specifically was chosen was decided by the synthesis tool. In our
end-of-September release of our FPGA reference design, constraints will
be added to force the synthesis tool to pick the "north west" CCC,
making it possible to read the configuration from the CCC's registers.

I am mainly looking for feedback on the dt-bindings on this version,
so that if something dt-abi related needs to change it can be done in
advance.

There are no maintainers changes in this series, but they are required
due to the binding rename. I am waiting for some changes queued in the
soc tree before rebasing on a later -rc before including that patch.

Thanks,
Conor.

Changes since v1:
- Stopped using the dt node name to generate the clk name. Rather than
  use clock-output-names etc, I just opted to call each PLL after it's
  individual base address:
  cccrefclk
    ccc@38100000_pll0
      ccc@38100000_pll0_out3
      ccc@38100000_pll0_out2
      ccc@38100000_pll0_out1
      ccc@38100000_pll0_out0
- dt nodes are now all called "clock-controller"

Conor Dooley (6):
  dt-bindings: clk: rename mpfs-clkcfg binding
  dt-bindings: clk: document PolarFire SoC fabric clocks
  dt-bindings: clk: add PolarFire SoC fabric clock ids
  clk: microchip: add PolarFire SoC fabric clock support
  dt-bindings: riscv: microchip: document icicle reference design
  riscv: dts: microchip: add the mpfs' fabric clock control

 .../bindings/clock/microchip,mpfs-ccc.yaml    |  81 +++++
 ...p,mpfs.yaml => microchip,mpfs-clkcfg.yaml} |   2 +-
 .../devicetree/bindings/riscv/microchip.yaml  |   1 +
 .../dts/microchip/mpfs-icicle-kit-fabric.dtsi |  27 +-
 .../boot/dts/microchip/mpfs-icicle-kit.dts    |   4 +
 .../dts/microchip/mpfs-polarberry-fabric.dtsi |   5 +
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |  34 +-
 drivers/clk/microchip/Makefile                |   1 +
 drivers/clk/microchip/clk-mpfs-ccc.c          | 293 ++++++++++++++++++
 .../dt-bindings/clock/microchip,mpfs-clock.h  |  23 ++
 10 files changed, 458 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
 rename Documentation/devicetree/bindings/clock/{microchip,mpfs.yaml => microchip,mpfs-clkcfg.yaml} (96%)
 create mode 100644 drivers/clk/microchip/clk-mpfs-ccc.c


base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868
-- 
2.36.1