Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220823144728.47068-1-pgwipeout@gmail.com> <86198a8a-96d4-5856-bc2d-44bf352c82fe@wolfvision.net>
In-Reply-To: <86198a8a-96d4-5856-bc2d-44bf352c82fe@wolfvision.net>
From:   Peter Geis <pgwipeout@gmail.com>
Date:   Wed, 24 Aug 2022 12:17:39 +0200
Message-ID: <CAMdYzYopzOJ2RtWtYgP3G4ESVMFhCqU3fOQq_kCc1g51ZDZ=bA@mail.gmail.com>
Subject: Re: [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
To:     Michael Riesch <michael.riesch@wolfvision.net>
Cc:     Heiko Stuebner <heiko@sntech.de>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>,
        Samuel Holland <samuel@sholland.org>,
        Markus Reichl <m.reichl@fivetechno.de>,
        "open list:GENERIC PHY FRAMEWORK" <linux-phy@lists.infradead.org>,
        arm-mail-list <linux-arm-kernel@lists.infradead.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@lists.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Wed, Aug 24, 2022 at 7:33 AM Michael Riesch
<michael.riesch@wolfvision.net> wrote:
>
> Hi Peter,
>
> On 8/23/22 16:47, Peter Geis wrote:
> > The otg sync state patch reuses the ret variable, but fails to set it to
> > zero after use. This leads to a situation when the otg port is in
> > peripheral mode where the otg phy aborts halfway through setup.  It also
> > fails to account for a failure to register the extcon notifier. Fix this
> > by using our own variable and skipping otg sync in case of failure.
> >
> > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
> >
> > Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> > ---
> >  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
> >  1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > index 0b1e9337ee8e..d579a22c61df 100644
> > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> >                                         struct rockchip_usb2phy_port *rport,
> >                                         struct device_node *child_np)
> >  {
> > -     int ret;
> > +     int ret, id;
> >
> >       rport->port_id = USB2PHY_PORT_OTG;
> >       rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> > @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> >                                       EXTCON_USB_HOST, &rport->event_nb);
> >               if (ret)
>
> This needs braces, right?
>
>         if (ret) {
> >                       dev_err(rphy->dev, "register USB HOST notifier failed\n");
> > +                     goto out;
>
>         }
>
> With the braces the patch works as expected.

Yup, thanks for that. I hate working without access to my hardware.

>
> Thanks and best regards,
> Michael
>
> >
> >               if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> >                       /* do initial sync of usb state */
> > -                     ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > -                     extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> > +                     id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > +                     extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> >               }
> >       }
> >