Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Markus Schneider-Pargmann <msp@baylibre.com>
To:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Lee Jones <lee@kernel.org>, Tony Lindgren <tony@atomide.com>,
        nm@ti.com, kristo@kernel.org
Cc:     Jerome Neanne <jneanne@baylibre.com>, khilman@baylibre.com,
        narmstrong@baylibre.com, j-keerthy@ti.com,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org,
        linux-omap@vger.kernel.org,
        Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH v4 3/6] DONOTMERGE: arm64: dts: ti: k3-am642-sk: Enable tps65219 power-button
Date:   Thu, 25 Aug 2022 17:02:21 +0200
Message-Id: <20220825150224.826258-4-msp@baylibre.com>
In-Reply-To: <20220825150224.826258-1-msp@baylibre.com>
References: <20220825150224.826258-1-msp@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Jerome Neanne <jneanne@baylibre.com>

This board uses the pin as a power-button, enable it.

Needed for driver testing but official board support pending.
TI commitment is required before board upstream kick-off.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1f7ce60ecb57..238798ea6a79 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -362,6 +362,7 @@ tps65219: pmic@30 {
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&gic500>;
 		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		ti,power-button;
 
 		buck1-supply = <&vcc_3v3_sys>;
 		buck2-supply = <&vcc_3v3_sys>;
-- 
2.37.2