Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 26 Aug 2022 00:06:05 +0200
From:   Marek =?UTF-8?B?QmVow7pu?= <kabel@kernel.org>
To:     Jakub Kicinski <kuba@kernel.org>
Cc:     Marcus Carlberg <marcus.carlberg@axis.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Paolo Abeni <pabeni@redhat.com>, <kernel@axis.com>,
        Pavana Sharma <pavana.sharma@digi.com>,
        Ashkan Boldaji <ashkan.boldaji@digi.com>,
        <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] net: dsa: mv88e6xxx: support RGMII cmode
Message-ID: <20220826000605.5cff0db8@thinkpad>
In-Reply-To: <20220825123807.3a7e37b7@kernel.org>
References: <20220822144136.16627-1-marcus.carlberg@axis.com>
        <20220825123807.3a7e37b7@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Thu, 25 Aug 2022 12:38:07 -0700
Jakub Kicinski <kuba@kernel.org> wrote:

> On Mon, 22 Aug 2022 16:41:36 +0200 Marcus Carlberg wrote:
> > Since the probe defaults all interfaces to the highest speed possible
> > (10GBASE-X in mv88e6393x) before the phy mode configuration from the
> > devicetree is considered it is currently impossible to use port 0 in
> > RGMII mode.
> > 
> > This change will allow RGMII modes to be configurable for port 0
> > enabling port 0 to be configured as RGMII as well as serial depending
> > on configuration.
> > 
> > Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
> > Signed-off-by: Marcus Carlberg <marcus.carlberg@axis.com>  
> 
> Seems like a new configuration which was not previously supported
> rather than a regression, right? If so I'll drop the Fixes tag
> when applying.

Please leave the fixes tag. This configuration should have been
supported from the beginning.

Marek