Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752126AbXFNM6M (ORCPT ); Thu, 14 Jun 2007 08:58:12 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751333AbXFNM56 (ORCPT ); Thu, 14 Jun 2007 08:57:58 -0400 Received: from smtp-0-1.linuxrulz.org ([64.191.81.102]:32993 "EHLO smtp-0-1.linuxrulz.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751075AbXFNM5z (ORCPT ); Thu, 14 Jun 2007 08:57:55 -0400 X-Greylist: delayed 1229 seconds by postgrey-1.27 at vger.kernel.org; Thu, 14 Jun 2007 08:57:54 EDT Message-ID: <4671366B.7090702@lbsd.net> Date: Thu, 14 Jun 2007 12:36:59 +0000 From: Nigel Kukard User-Agent: Thunderbird 2.0.0.0 (X11/20070421) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: SATA problems X-Enigmail-Version: 0.95.0 OpenPGP: id=27702C4E; url=pgpkeys.mit.edu Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enigB42774CFF3C97E61E395F3BF" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 63260 Lines: 1437 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigB42774CFF3C97E61E395F3BF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I'm stumped trying to track down the below intermittent problem..... I've confirmed this problem on 2.6.19, 2.6.20 and 2.6.21. Any help greatly appreciated! Regards Nigel Jun 14 07:55:52 nigel-m2v kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jun 14 07:55:52 nigel-m2v kernel: ata2.00: cmd ca/00:18:87:e7:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 12288 out Jun 14 07:55:52 nigel-m2v kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 14 07:55:52 nigel-m2v kernel: ata2: soft resetting port Jun 14 07:55:52 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:55:52 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:56:22 nigel-m2v kernel: ata2.00: qc timeout (cmd 0xef) Jun 14 07:56:22 nigel-m2v kernel: ata2.00: failed to set xfermode (err_mask=3D0x4) Jun 14 07:56:22 nigel-m2v kernel: ata2: failed to recover some devices, retrying in 5 secs Jun 14 07:56:27 nigel-m2v kernel: ata2: soft resetting port Jun 14 07:56:27 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:56:27 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:56:57 nigel-m2v kernel: ata2.00: qc timeout (cmd 0xef) Jun 14 07:56:57 nigel-m2v kernel: ata2.00: failed to set xfermode (err_mask=3D0x4) Jun 14 07:56:57 nigel-m2v kernel: ata2.00: limiting speed to UDMA/133:PIO= 3 Jun 14 07:56:57 nigel-m2v kernel: ata2: failed to recover some devices, retrying in 5 secs Jun 14 07:57:02 nigel-m2v kernel: ata2: soft resetting port Jun 14 07:57:02 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:57:02 nigel-m2v kernel: rtc: lost 2 interrupts Jun 14 07:57:02 nigel-m2v kernel: ATA: abnormal status 0x7F on port 0x0001c807 Jun 14 07:57:32 nigel-m2v kernel: ata2.00: qc timeout (cmd 0xef) Jun 14 07:57:32 nigel-m2v kernel: ata2.00: failed to set xfermode (err_mask=3D0x4) Jun 14 07:57:32 nigel-m2v kernel: ata2.00: disabled Jun 14 07:57:33 nigel-m2v kernel: ata2: EH complete Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 59271 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 192221519 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 24027682 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 140129751 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 17516211 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 93828927 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 11728608 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 191848111 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 23981006 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 23981007 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 138379031 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 17297371 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 138855071 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 17356876 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 59295 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 7404 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: Aborting journal on device sda1. Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 191848111 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 23981006 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: sd 3:0:0:0: SCSI error: return code =3D= 0x00040000 Jun 14 07:57:33 nigel-m2v kernel: end_request: I/O error, dev sda, sector 93005999 Jun 14 07:57:33 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 11625742 Jun 14 07:57:33 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:57:33 nigel-m2v kernel: ext3_abort called. Jun 14 07:57:33 nigel-m2v kernel: EXT3-fs error (device sda1): ext3_journal_start_sb: Detected aborted journal Jun 14 07:57:33 nigel-m2v kernel: Remounting filesystem read-only Jun 14 07:57:33 nigel-m2v kernel: sda : READ CAPACITY failed. Jun 14 07:57:33 nigel-m2v kernel: sda : status=3D0, message=3D00, host=3D= 4, driver=3D00 Jun 14 07:57:33 nigel-m2v kernel: sda : sense not available. Jun 14 07:57:33 nigel-m2v kernel: sda: Write Protect is off Jun 14 07:57:33 nigel-m2v kernel: sda: asking for cache data failed Jun 14 07:57:33 nigel-m2v kernel: sda: assuming drive cache: write throug= h Jun 14 07:58:06 nigel-m2v kernel: printk: 1 messages suppressed. Jun 14 07:58:06 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 11468802 Jun 14 07:58:06 nigel-m2v kernel: lost page write due to I/O error on sda= 1 Jun 14 07:58:06 nigel-m2v kernel: Buffer I/O error on device sda1, logical block 11468803 Jun 14 07:58:06 nigel-m2v kernel: lost page write due to I/O error on sda= 1 dmesg after boot... Linux version 2.6.21.5-0.1 (nkukard@devel-0-2) (gcc version 4.1.2) #1 SMP Wed Jun 13 06:46:04 GMT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 00000000cfeb0000 end: 00000000cffb0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000cffb0000 size: 000000000000e000 end: 00000000cffbe000 type: 3 copy_e820_map() start: 00000000cffbe000 size: 0000000000022000 end: 00000000cffe0000 type: 4 copy_e820_map() start: 00000000cffe0000 size: 0000000000020000 end: 00000000d0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fecc0000 size: 0000000000001000 end: 00000000fecc1000 type: 2 copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 copy_e820_map() start: 0000000100000000 size: 0000000030000000 end: 0000000130000000 type: 1 copy_e820_map() type is E820_RAM BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data) BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1048576 early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 6400 pages used for memmap HighMem zone: 812800 pages, LIFO batch:31 DMI present. ACPI: RSDP 000FA960, 0014 (r0 ACPIAM) ACPI: RSDT CFFB0000, 003C (r1 NEC 4000730 MSFT 97) ACPI: FACP CFFB0200, 0084 (r2 A_M_I_ OEMFACP 4000730 MSFT 97) ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [200701= 26] ACPI: DSDT CFFB05C0, 4E3F (r1 A0498 A0498000 0 INTL 20060113) ACPI: FACS CFFBE000, 0040 ACPI: APIC CFFB0390, 0068 (r1 A_M_I_ OEMAPIC 4000730 MSFT 97) ACPI: MCFG CFFB0400, 003C (r1 A_M_I_ OEMMCFG 4000730 MSFT 97) ACPI: SLIC CFFB0440, 0176 (r1 NEC 4000730 MSFT 97) ACPI: OEMB CFFBE040, 0060 (r1 A_M_I_ AMI_OEM 4000730 MSFT 97) ACPI: HPET CFFB5400, 0038 (r1 A_M_I_ OEMHPET 4000730 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x11068201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) Built 1 zonelists. Total pages: 1040384 Kernel command line: mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fecc0000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2799.995 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3363908k/4194304k available (3611k kernel code, 42588k reserved, 1387k data, 3460k init, 2490048k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05e9000 - 0xc094a000 (3460 kB) .data : 0xc0486fd7 - 0xc05e1d84 (1387 kB) .text : 0xc0100000 - 0xc0486fd7 (3611 kB) Checking if this processor honours the WP bit even in supervisor mode... = Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 32-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 5601.64 BogoMIPS (lpj=3D28008240) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 03 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5599.39 BogoMIPS (lpj=3D27996994) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 03 Total of 2 processors activated (11201.04 BogoMIPS). ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D0 pin2=3D0 Brought up 2 CPUs migration_cost=3D0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3D128 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 17 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.20 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a= report pnp: 00:06: ioport range 0xc00-0xc0f has been reserved pnp: 00:06: ioport range 0xd00-0xd0f has been reserved pnp: 00:06: ioport range 0xa20-0xa2f has been reserved pnp: 00:06: ioport range 0xa30-0xa3f has been reserved pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:10: iomem range 0x100000-0xcfffffff could not be reserved Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f9000000-fbbfffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:03.0 IO window: d000-dfff MEM window: fbd00000-fbdfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.1 IO window: disabled. MEM window: disabled. PREFETCH window: f7f00000-f7ffffff PCI: Bridge: 0000:00:03.2 IO window: disabled. MEM window: fbc00000-fbcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.3 IO window: disabled. MEM window: disabled. PREFETCH window: f7e00000-f7efffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fbf00000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: e000-efff MEM window: fbe00000-fbefffff PREFETCH window: f0000000-f00fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:03.1 to 64 ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:03.2 to 64 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:03.3 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1181799967.780:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered (default) PCI: MSI quirk detected. MSI deactivated. PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] PCI: Setting latency timer of device 0000:00:03.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.1:pcie00] Allocate Port Service[0000:00:03.1:pcie02] PCI: Setting latency timer of device 0000:00:03.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.2:pcie00] Allocate Port Service[0000:00:03.2:pcie02] PCI: Setting latency timer of device 0000:00:03.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.3:pcie00] Allocate Port Service[0000:00:03.3:pcie02] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.14) netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 7 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST340014A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=3D16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724. Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-5[2423]-mh3) aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase=3D and irq=3D options<5>iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.1.11 Copyright(c) 2004-2006 Emulex. All rights reserved. seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=3D1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007) stex: Promise SuperTrak EX Driver version: 3.1.0.1 sata_via 0000:00:0f.0: version 2.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 21 ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 21 scsi2 : sata_via ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0001cc07 scsi3 : sata_via ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x0001c807 ATA: abnormal status 0x7F on port 0x0001c807 ata2.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133 ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI= : 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 3:0:0:0: Attached scsi disk sda sd 3:0:0:0: Attached scsi generic sg0 type 0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 1187 MB/s raid6: int32x2 1091 MB/s raid6: int32x4 832 MB/s raid6: int32x8 756 MB/s raid6: mmxx1 2277 MB/s raid6: mmxx2 4202 MB/s raid6: sse1x1 2243 MB/s raid6: sse1x2 3760 MB/s raid6: sse2x1 3772 MB/s raid6: sse2x2 5277 MB/s raid6: using algorithm sse2x2 (5277 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 8532.400 MB/sec raid5: using function: pIII_sse (8532.400 MB/sec) md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 NET: Registered protocol family 15 Starting balanced_irq Using IPI No-Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 3460k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. hdc: drive_cmd: status=3D0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=3D0x04 { AbortedCommand } ide: failed opcode was: 0xef EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /.swap. Priority:-1 extents:133 across:541296k usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8fffc00 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 22, io base 0x0000b480 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 23, io base 0x0000b800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 24 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 24, io base 0x0000bc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 4 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Eleen USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Eleen USB Keyboard] on usb-0000:00:10.0-1 input: Eleen USB Keyboard as /class/input/input1 input: USB HID v1.10 Mouse [Eleen USB Keyboard] on usb-0000:00:10.0-1 input: KYE NetScroll+ EYE as /class/input/input2 input: USB HID v1.10 Mouse [KYE NetScroll+ EYE] on usb-0000:00:10.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver usbcore: registered new interface driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 25 PCI: Setting latency timer of device 0000:80:01.0 to 64 hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... lspci -vvv... 00:00.0 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge Subsystem: VIA Technologies, Inc. VT3351 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort- SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - Reset- FastB2B- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR+ TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <1us, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupporte= d+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIr= q- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=3D0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupporte= d+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Por= t 1 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIr= q- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=3D0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupporte= d+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Por= t 2 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIr= q- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=3D0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000001 Pending: 00000000 00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupporte= d+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Por= t 3 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIr= q- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=3D0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupporte= d+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Por= t 4 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIr= q- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=3D0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: VIA Technologies, Inc. VT8237A SATA 2-Port Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort= - SERR- TAbort- SERR- TAbort= - Reset- FastB2B- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [70] Subsystem: VIA Technologies, Inc. VT8237A Host Bridge 00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort= - Reset- FastB2B- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [70] Subsystem: VIA Technologies, Inc. VT8237A PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR+ TAbort- SERR- TAbort= - SERR- TAbort- SERR-