Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Matthias Kaehlcke <mka@chromium.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Douglas Anderson <dianders@chromium.org>,
        Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH] arm64: dts: qcom: sc7280-herobrine: Don't enable the USB 2.0 port
Date:   Fri, 26 Aug 2022 08:48:27 -0700
Message-Id: <20220826084813.1.I8c9a771fcf4d1cfb6e8e0ef17a153143af9a644d@changeid>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The USB 2.0 port of sc7280 is currently not used by any herobrine
board. Delete the device tree entries that enable it.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
I was also told that the 2.0 port is for the Embedded USB Debugger
(EUD) only, but I'm not sure if that's true. From the Linux side
it looks like a regular dwc3 controller.

 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 3f8996c00b05..b2f0404d3f71 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -606,18 +606,6 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-};
-
 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
 
 &dp_hot_plug_det {
-- 
2.37.2.672.g94769d06f0-goog