Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Eliav Farber <farbere@amazon.com>
To:     <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>,
        <p.zabel@pengutronix.de>, <rtanwar@maxlinear.com>,
        <linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
CC:     <farbere@amazon.com>, <talel@amazon.com>, <hhhawa@amazon.com>,
        <jonnyc@amazon.com>, <hanochu@amazon.com>, <ronenk@amazon.com>,
        <itamark@amazon.com>, <shellykz@amazon.com>, <shorer@amazon.com>,
        <amitlavi@amazon.com>, <almogbs@amazon.com>, <dkl@amazon.com>,
        <rahul.tanwar@linux.intel.com>, <andriy.shevchenko@intel.com>
Subject: [PATCH v3 07/19] hwmon: (mr75203) enable polling for all VM channels
Date:   Tue, 30 Aug 2022 19:22:00 +0000
Message-ID: <20220830192212.28570-8-farbere@amazon.com>
In-Reply-To: <20220830192212.28570-1-farbere@amazon.com>
References: <20220830192212.28570-1-farbere@amazon.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V3 -> V2:
- Move configuration of ip-polling register from previous patch to a
  separate commit.

 drivers/hwmon/mr75203.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 639f5a300170..f561806c400d 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -388,6 +388,20 @@ static int pvt_init(struct pvt_device *pvt)
 		if (ret)
 			return ret;
 
+		val = GENMASK(pvt->c_num - 1, 0) | VM_CH_INIT |
+		      IP_POLL << SDIF_ADDR_SFT |
+		      SDIF_WRN_W | SDIF_PROG;
+		ret = regmap_write(v_map, SDIF_W, val);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+					       val, !(val & SDIF_BUSY),
+					       PVT_POLL_DELAY_US,
+					       PVT_POLL_TIMEOUT_US);
+		if (ret)
+			return ret;
+
 		val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT |
 		      CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT |
 		      SDIF_WRN_W | SDIF_PROG;
-- 
2.37.1