Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org,
        Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH v3 2/3] iio: adc: tsc2046: add vref support
Date:   Thu,  1 Sep 2022 06:11:45 +0200
Message-Id: <20220901041146.3652287-2-o.rempel@pengutronix.de>
In-Reply-To: <20220901041146.3652287-1-o.rempel@pengutronix.de>
References: <20220901041146.3652287-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

If VREF pin is attached, we should use external VREF source instead of
the internal. Otherwise we will get wrong measurements on some of channel
types.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/iio/adc/ti-tsc2046.c | 64 +++++++++++++++++++++++++++++++-----
 1 file changed, 55 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
index 0d9436a69cbfb..bbc8b4137b0b1 100644
--- a/drivers/iio/adc/ti-tsc2046.c
+++ b/drivers/iio/adc/ti-tsc2046.c
@@ -8,6 +8,7 @@
 #include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
 #include <asm/unaligned.h>
@@ -175,6 +176,9 @@ struct tsc2046_adc_priv {
 	u32 time_per_bit_ns;
 
 	struct tsc2046_adc_ch_cfg ch_cfg[TI_TSC2046_MAX_CHAN];
+	bool use_internal_vref;
+	unsigned int vref_mv;
+	struct regulator *vref_reg;
 };
 
 #define TI_TSC2046_V_CHAN(index, bits, name)			\
@@ -252,7 +256,9 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx,
 	case TI_TSC2046_ADDR_AUX:
 	case TI_TSC2046_ADDR_VBAT:
 	case TI_TSC2046_ADDR_TEMP0:
-		pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON;
+		pd |= TI_TSC2046_SER;
+		if (priv->use_internal_vref)
+			pd |= TI_TSC2046_PD1_VREF_ON;
 	}
 
 	return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd;
@@ -468,7 +474,7 @@ static int tsc2046_adc_read_raw(struct iio_dev *indio_dev,
 		 * So, it is better to use external voltage-divider driver
 		 * instead, which is calculating complete chain.
 		 */
-		*val = TI_TSC2046_INT_VREF;
+		*val = priv->vref_mv;
 		*val2 = chan->scan_type.realbits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	}
@@ -781,22 +787,42 @@ static int tsc2046_adc_probe(struct spi_device *spi)
 	indio_dev->num_channels = dcfg->num_channels;
 	indio_dev->info = &tsc2046_adc_info;
 
+	priv->vref_reg = devm_regulator_get_optional(&spi->dev, "vref");
+	if (!IS_ERR(priv->vref_reg)) {
+		ret = regulator_enable(priv->vref_reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(priv->vref_reg);
+		if (ret < 0)
+			goto err_regulator_disable;
+
+		priv->vref_mv = ret / 1000;
+		priv->use_internal_vref = false;
+	} else {
+		/* Use internal reference */
+		priv->vref_mv = TI_TSC2046_INT_VREF;
+		priv->use_internal_vref = true;
+	}
+
 	tsc2046_adc_parse_fwnode(priv);
 
 	ret = tsc2046_adc_setup_spi_msg(priv);
 	if (ret)
-		return ret;
+		goto err_regulator_disable;
 
 	mutex_init(&priv->slock);
 
 	ret = devm_request_irq(dev, spi->irq, &tsc2046_adc_irq,
 			       IRQF_NO_AUTOEN, indio_dev->name, indio_dev);
 	if (ret)
-		return ret;
+		goto err_regulator_disable;
 
 	trig = devm_iio_trigger_alloc(dev, "touchscreen-%s", indio_dev->name);
-	if (!trig)
-		return -ENOMEM;
+	if (!trig) {
+		ret = -ENOMEM;
+		goto err_regulator_disable;
+	}
 
 	priv->trig = trig;
 	iio_trigger_set_drvdata(trig, indio_dev);
@@ -811,20 +837,39 @@ static int tsc2046_adc_probe(struct spi_device *spi)
 	ret = devm_iio_trigger_register(dev, trig);
 	if (ret) {
 		dev_err(dev, "failed to register trigger\n");
-		return ret;
+		goto err_regulator_disable;
 	}
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      &tsc2046_adc_trigger_handler, NULL);
 	if (ret) {
 		dev_err(dev, "Failed to setup triggered buffer\n");
-		return ret;
+		goto err_regulator_disable;
 	}
 
 	/* set default trigger */
 	indio_dev->trig = iio_trigger_get(priv->trig);
 
-	return devm_iio_device_register(dev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		goto err_regulator_disable;
+
+	return 0;
+
+err_regulator_disable:
+	if (!IS_ERR(priv->vref_reg))
+		regulator_disable(priv->vref_reg);
+
+	return ret;
+}
+
+static void tsc2046_adc_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct tsc2046_adc_priv *priv = iio_priv(indio_dev);
+
+	if (!IS_ERR(priv->vref_reg))
+		regulator_disable(priv->vref_reg);
 }
 
 static const struct of_device_id ads7950_of_table[] = {
@@ -839,6 +884,7 @@ static struct spi_driver tsc2046_adc_driver = {
 		.of_match_table = ads7950_of_table,
 	},
 	.probe = tsc2046_adc_probe,
+	.remove = tsc2046_adc_remove,
 };
 module_spi_driver(tsc2046_adc_driver);
 
-- 
2.30.2