Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 1 Sep 2022 14:08:23 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     Anand Moon <anand@edgeble.ai>
Cc:     Giuseppe Cavallaro <peppe.cavallaro@st.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Jose Abreu <joabreu@synopsys.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Sugar Zhang <sugar.zhang@rock-chips.com>,
        David Wu <david.wu@rock-chips.com>,
        Jagan Teki <jagan@edgeble.ai>, netdev@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] net: ethernet: stmicro: stmmac: dwmac-rk: Add rv1126
 support
Message-ID: <YxCgtyqZ6+D5MBY5@lunn.ch>
References: <20220829065044.1736-1-anand@edgeble.ai>
 <20220829065044.1736-2-anand@edgeble.ai>
 <Ywy6o2d9j4Z7+WYX@lunn.ch>
 <CACF1qnfmzcq55GvsD=GQ+ciLRstZ-7ef1EDaBzKMqBzU0O+WRw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CACF1qnfmzcq55GvsD=GQ+ciLRstZ-7ef1EDaBzKMqBzU0O+WRw@mail.gmail.com>
Precedence: bulk

> > On Mon, Aug 29, 2022 at 06:50:42AM +0000, Anand Moon wrote:
> > > Rockchip RV1126 has GMAC 10/100/1000M ethernet controller
> > > via RGMII and RMII interfaces are configured via M0 and M1 pinmux.
> > >
> > > This patch adds rv1126 support by adding delay lines of M0 and M1
> > > simultaneously.
> >
> > What does 'delay lines' mean with respect to RGMII?
> >
> > The RGMII signals need a 2ns delay between the clock and the data
> > lines. There are three places this can happen:
> >
> > 1) In the PHY
> > 2) Extra long lines on the PCB
> > 3) In the MAC
> >
> > Generally, 1) is used, and controlled via phy-mode. A value of
> > PHY_INTERFACE_MODE_RGMII_ID passed to the PHY driver means it will add
> > these delays.
> >
> > You don't want both the MAC and the PHY adding delays.
> >
> These are set to enable MAC transmit clock delay set for Tx and Rx for
> iomux group.

Which does not answer my question. Is this the same as, or different
to, the 2ns delay required by RGMII?

    Andrew