Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Iskren Chernev <iskren.chernev@gmail.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
Cc:     phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        Iskren Chernev <iskren.chernev@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Kees Cook <keescook@chromium.org>,
        Anton Vorontsov <anton@enomsg.org>,
        Colin Cross <ccross@android.com>,
        Tony Luck <tony.luck@intel.com>, linux-kernel@vger.kernel.org
Subject: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2
Date:   Sat,  3 Sep 2022 20:41:50 +0300
Message-Id: <20220903174150.3566935-10-iskren.chernev@gmail.com>
In-Reply-To: <20220903174150.3566935-1-iskren.chernev@gmail.com>
References: <20220903174150.3566935-1-iskren.chernev@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
Remaining issues from make dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
  DTS I checked is written in this way.

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 243 ++++++++++++++++++
 2 files changed, 244 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33de528..b8c2de2932a6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..ea5f626a6749
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		xo-board {
+			clock-frequency = <19200000>;
+		};
+
+		sleep-clk {
+			clock-frequency = <32764>;
+		};
+	};
+
+	reserved-memory {
+		mtp_mem: memory@cc300000 {
+			reg = <0x00 0xcc300000 0x00 0xb00000>;
+			no-map;
+		};
+
+		param_mem: memory@cc200000 {
+			reg = <0x00 0xcc200000 0x00 0x100000>;
+			no-map;
+		};
+
+		bootloader_log_mem: memory@5fff7000 {
+			reg = <0x00 0x5fff7000 0x00 0x8000>;
+			no-map;
+		};
+
+		ramoops@cbe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xcbe00000 0x0 0x400000>;
+			record-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+		};
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&hsusb_phy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&rpm_requests {
+	pm6125-regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
-- 
2.37.2