Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759483AbXFQMER (ORCPT ); Sun, 17 Jun 2007 08:04:17 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758525AbXFQMD6 (ORCPT ); Sun, 17 Jun 2007 08:03:58 -0400 Received: from daemonizer.de ([87.230.16.230]:60482 "EHLO daemonizer.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757712AbXFQMDx (ORCPT ); Sun, 17 Jun 2007 08:03:53 -0400 From: Maximilian Engelhardt To: Michael Buesch Subject: Re: b44: high ping times with wireless-dev Date: Sun, 17 Jun 2007 14:03:30 +0200 User-Agent: KMail/1.9.7 Cc: netdev , "linux-kernel" , "linux-wireless" , Gary Zambrano , Stephen Hemminger , "Jeff Garzik" , "Arnaldo Carvalho de Melo" References: <200706162327.47413.maxi@daemonizer.de> <200706171255.40155.mb@bu3sch.de> In-Reply-To: <200706171255.40155.mb@bu3sch.de> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart7581689.RO0QYX5Hdk"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200706171403.34299.maxi@daemonizer.de> X-Spam-Score: -4.2 (----) X-Spam-Report: No, hits=-4.2 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.7-deb * -1.8 ALL_TRUSTED Passed through trusted hosts only via SMTP * -2.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1% * [score: 0.0000] * 0.2 AWL AWL: From: address is in the auto white-list Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32973 Lines: 778 --nextPart7581689.RO0QYX5Hdk Content-Type: multipart/mixed; boundary="Boundary-01=_TMSdGFcBDtYoDGe" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_TMSdGFcBDtYoDGe Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Sunday 17 June 2007, Michael Buesch wrote: > On Saturday 16 June 2007 23:27:43 Maximilian Engelhardt wrote: > > [...] > > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 > > ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, lo= w) > > -> IRQ 10 > > ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 > > b44.c:v2.0 > > eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7 > > [...] > > Ok, I prepared two debugging patches. > > Please enable SonicsSiliconBackplane Debugging in the kernel kconfig, > so I can get more detail information about your card. > Device Drivers/Sonics Silicon Backplane/SSB debugging > (Must disable "No SSB kernel messages") > > Please apply and test the attached debugging patches in a row. > So apply patch 1 and test if it works again. If not, apply > patch 2 and test if it works. > Always save complete dmesg log on each test run and send it to me. > > Thanks for testing. > (This time it seems we are actually getting somewhere, when > dealing with sane people. :D ) I did the tests with my kernel where only the card is on interrupt 10. dmes= g=20 is attached. With the first patch applied networking does work again. I also additionall= y=20 tried patch2 and it also does work. Maxi --Boundary-01=_TMSdGFcBDtYoDGe Content-Type: text/plain; charset="utf-8"; name="dmesg_patch1" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_patch1" Linux version 2.6.22-rc4-wireless-dev-20070616-test1 (root@koala) (gcc vers= ion 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #6 PREEMPT Sun Jun 17 13= :24:13 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004dee0000 (usable) BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data) BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS) BIOS-e820: 000000004df00000 - 0000000050000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 350MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 319200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 319200 early_node_map[1] active PFN ranges 0: 0 -> 319200 On node 0 totalpages: 319200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 701 pages used for memmap HighMem zone: 89123 pages, LIFO batch:15 DMI present. ACPI: RSDP 000F6050, 0014 (r0 ACER ) ACPI: RSDT 4DEE5A39, 0030 (r1 ACER Wagtail 20020114 LTP 0) ACPI: FACP 4DEEBF2C, 0074 (r1 ACER Wagtail 20020114 PTL 50) ACPI: DSDT 4DEE5A69, 64C3 (r1 ACER Wagtail 20020114 MSFT 100000E) ACPI: FACS 4DEFCFC0, 0040 ACPI: HPET 4DEEBFA0, 0038 (r1 ACER Wagtail 20020114 PTL 0) ACPI: BOOT 4DEEBFD8, 0028 (r1 ACER Wagtail 20020114 LTP 1) ACPI: PM-Timer IO Port: 0x1008 ACPI: HPET id: 0x8086a201 base: 0x0 Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000) Built 1 zonelists. Total pages: 316707 Kernel command line: root=3D/dev/sda1 ro vga=3D0x31b resume=3D/dev/sda2 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (019c4000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1395.565 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1259844k/1276800k available (3572k kernel code, 16168k reserved, 11= 52k data, 220k init, 359296k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05a0000 - 0xc05d7000 ( 220 kB) .data : 0xc047d05d - 0xc059d0b0 (1152 kB) .text : 0xc0100000 - 0xc047d05d (3572 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=3D23, HWalign=3D64, Order=3D0-1, MinObjects=3D4, Processors= =3D1, Nodes=3D1 Calibrating delay using timer specific routine.. 2793.34 BogoMIPS (lpj=3D46= 53358) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 0000= 0180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00= 000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) NET: Registered protocol family 16 No dock devices found. ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=3D2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved pnp: 00:04: iomem range 0xff800000-0xffbfffff could not be reserved pnp: 00:04: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:04: iomem range 0x0-0x9ffff could not be reserved Time: tsc clocksource has been installed. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 60000000-63ffffff MEM window: 6c000000-6fffffff PCI: Bus 7, cardbus bridge: 0000:02:06.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 64000000-67ffffff MEM window: 70000000-73ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: e0200000-e07fffff PREFETCH window: 60000000-67ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages NTFS driver 2.1.28 [Flags: R/W]. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: Transitioning device [FAN0] to D3 ACPI: Transitioning device [FAN0] to D3 ACPI: Fan [FAN0] (off) ACPI: Transitioning device [FAN1] to D3 ACPI: Transitioning device [FAN1] to D3 ACPI: Fan [FAN1] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (54 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac intel_rng: FWH not detected ppdev: user-space parallel port driver Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -= > IRQ 11 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm] Initialized i915 1.6.0 20060119 on minor 1 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/91= 5GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 32636kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1280x1024-32@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 160x64 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -= > IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EP= P,ECP,DMA] Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 lp0: using parport0 (interrupt-driven). loop: module loaded nbd: registered device at major 43 Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007) bonding: Warning: either miimon or arp_interval and arp_ip_target module pa= rameters must be specified, otherwise bonding will not detect link failures= ! see bonding.txt for details. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -= > IRQ 10 ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243) ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243) ssb: Switching to PCI core, index 2 ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 b44.c:v2.0 ssb: Switching to Fast Ethernet core, index 0 Enabling IRQ vectors ssb: Switching to PCI core, index 2 ssb: Switching to Fast Ethernet core, index 0 Writing INTVEC. TPSFLAG is 0x00000041 ssb: Switching to PCI core, index 2 ssb: Switching to Fast Ethernet core, index 0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq = 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq = 15 ata1.00: ata_hpa_resize 1: sectors =3D 156301488, hpa_sectors =3D 156301488 ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA=20 ata1.00: ata_hpa_resize 1: sectors =3D 156301488, hpa_sectors =3D 156301488 ata1.00: configured for UDMA/100 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda:<4>Clocksource tsc unstable (delta =3D -413804920 ns) sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7543A 1-00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usbmon: debugfs is not available Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 input: PC Speaker as /class/input/input4 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad as /class/input/input5 i2c /dev entries driver usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:2= 5 2007 UTC). ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 220k freed ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -= > IRQ 10 p54: LM86 firmware wmaster0: Selected rate control algorithm 'simple' phy0: hwaddr 00:60:b3:91:45:5b, isl3890 Adding 2001880k swap on /dev/sda2. Priority:-1 extents:1 across:2001880k EXT3 FS on sda1, internal journal fuse init (API version 7.8) ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready --Boundary-01=_TMSdGFcBDtYoDGe Content-Type: text/plain; charset="utf-8"; name="dmesg_patch2" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_patch2" Linux version 2.6.22-rc4-wireless-dev-20070616-test1 (root@koala) (gcc vers= ion 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #7 PREEMPT Sun Jun 17 13= :47:38 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004dee0000 (usable) BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data) BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS) BIOS-e820: 000000004df00000 - 0000000050000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 350MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 319200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 319200 early_node_map[1] active PFN ranges 0: 0 -> 319200 On node 0 totalpages: 319200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 701 pages used for memmap HighMem zone: 89123 pages, LIFO batch:15 DMI present. ACPI: RSDP 000F6050, 0014 (r0 ACER ) ACPI: RSDT 4DEE5A39, 0030 (r1 ACER Wagtail 20020114 LTP 0) ACPI: FACP 4DEEBF2C, 0074 (r1 ACER Wagtail 20020114 PTL 50) ACPI: DSDT 4DEE5A69, 64C3 (r1 ACER Wagtail 20020114 MSFT 100000E) ACPI: FACS 4DEFCFC0, 0040 ACPI: HPET 4DEEBFA0, 0038 (r1 ACER Wagtail 20020114 PTL 0) ACPI: BOOT 4DEEBFD8, 0028 (r1 ACER Wagtail 20020114 LTP 1) ACPI: PM-Timer IO Port: 0x1008 ACPI: HPET id: 0x8086a201 base: 0x0 Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000) Built 1 zonelists. Total pages: 316707 Kernel command line: root=3D/dev/sda1 ro vga=3D0x31b resume=3D/dev/sda2 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (019c4000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1395.554 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1259844k/1276800k available (3571k kernel code, 16168k reserved, 11= 48k data, 220k init, 359296k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05a0000 - 0xc05d7000 ( 220 kB) .data : 0xc047cf7d - 0xc059c0b0 (1148 kB) .text : 0xc0100000 - 0xc047cf7d (3571 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=3D23, HWalign=3D64, Order=3D0-1, MinObjects=3D4, Processors= =3D1, Nodes=3D1 Calibrating delay using timer specific routine.. 2793.33 BogoMIPS (lpj=3D46= 53334) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 0000= 0180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00= 000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) NET: Registered protocol family 16 No dock devices found. ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=3D2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved pnp: 00:04: iomem range 0xff800000-0xffbfffff could not be reserved pnp: 00:04: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:04: iomem range 0x0-0x9ffff could not be reserved Time: tsc clocksource has been installed. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 60000000-63ffffff MEM window: 6c000000-6fffffff PCI: Bus 7, cardbus bridge: 0000:02:06.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 64000000-67ffffff MEM window: 70000000-73ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: e0200000-e07fffff PREFETCH window: 60000000-67ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages NTFS driver 2.1.28 [Flags: R/W]. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: Transitioning device [FAN0] to D3 ACPI: Transitioning device [FAN0] to D3 ACPI: Fan [FAN0] (off) ACPI: Transitioning device [FAN1] to D3 ACPI: Transitioning device [FAN1] to D3 ACPI: Fan [FAN1] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (49 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac intel_rng: FWH not detected ppdev: user-space parallel port driver Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -= > IRQ 11 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm] Initialized i915 1.6.0 20060119 on minor 1 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/91= 5GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 32636kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1280x1024-32@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 160x64 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -= > IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EP= P,ECP,DMA] Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 lp0: using parport0 (interrupt-driven). loop: module loaded nbd: registered device at major 43 Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007) bonding: Warning: either miimon or arp_interval and arp_ip_target module pa= rameters must be specified, otherwise bonding will not detect link failures= ! see bonding.txt for details. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -= > IRQ 10 ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243) ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243) ssb: Switching to PCI core, index 2 ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 b44.c:v2.0 ssb: Switching to Fast Ethernet core, index 0 Enabling IRQ vectors ssb: Switching to PCI core, index 2 ssb: Switching to Fast Ethernet core, index 0 Writing INTVEC. TPSFLAG is 0x00000041 ssb: Switching to PCI core, index 2 Wrote translation ssb: Switching to Fast Ethernet core, index 0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -= > IRQ 10 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq = 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq = 15 ata1.00: ata_hpa_resize 1: sectors =3D 156301488, hpa_sectors =3D 156301488 ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA=20 ata1.00: ata_hpa_resize 1: sectors =3D 156301488, hpa_sectors =3D 156301488 ata1.00: configured for UDMA/100 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda:<4>Clocksource tsc unstable (delta =3D -417033865 ns) sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7543A 1-00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usbmon: debugfs is not available Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 input: PC Speaker as /class/input/input4 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad as /class/input/input5 i2c /dev entries driver usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:2= 5 2007 UTC). ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 220k freed ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -= > IRQ 10 p54: LM86 firmware wmaster0: Selected rate control algorithm 'simple' phy0: hwaddr 00:60:b3:91:45:5b, isl3890 Adding 2001880k swap on /dev/sda2. Priority:-1 extents:1 across:2001880k EXT3 FS on sda1, internal journal fuse init (API version 7.8) ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready --Boundary-01=_TMSdGFcBDtYoDGe-- --nextPart7581689.RO0QYX5Hdk Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQBGdSMWOimwv528XGERAv8VAKDHAtiPp84Y8bT9tQWh3UOx9t04gwCfQ1Bi UclnTmCa3ajSEN1FW1Wsj1M= =/Kxu -----END PGP SIGNATURE----- --nextPart7581689.RO0QYX5Hdk-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/