Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Anjelique Melendez <quic_amelende@quicinc.com>
To:     <agross@kernel.org>, <bjorn.andersson@linaro.org>,
        <linus.walleij@linaro.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>
CC:     <konrad.dybcio@somainline.org>, <linux-arm-msm@vger.kernel.org>,
        <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        Anirudh Ghayal <quic_aghayal@quicinc.com>,
        Anjelique Melendez <quic_amelende@quicinc.com>
Subject: [PATCH 2/4] pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping
Date:   Wed, 7 Sep 2022 13:15:29 -0700
Message-ID: <20220907201528.9351-3-quic_amelende@quicinc.com>
In-Reply-To: <20220907201528.9351-1-quic_amelende@quicinc.com>
References: <20220907201528.9351-1-quic_amelende@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Anirudh Ghayal <quic_aghayal@quicinc.com>

The SPMI based PMICs have the HIGH and LOW GPIO output
strength mappings interchanged, fix them.

Keep the mapping same for older SSBI based PMICs.

CRs-Fixed: 2246473
Signed-off-by: Anirudh Ghayal <quic_aghayal@quicinc.com>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c     | 2 +-
 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c     | 4 ++--
 include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 9 +++++++--
 3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index cf6b6047de8d..fceccf1ec099 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -525,7 +525,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			pad->pullup = arg;
 			break;
 		case PMIC_GPIO_CONF_STRENGTH:
-			if (arg > PMIC_GPIO_STRENGTH_LOW)
+			if (arg > PMIC_GPIO_STRENGTH_HIGH)
 				return -EINVAL;
 			pad->strength = arg;
 			break;
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index 1b41adda8129..0f96d130813b 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2015, Sony Mobile Communications AB.
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013, 2018 The Linux Foundation. All rights reserved.
  */
 
 #include <linux/module.h>
@@ -371,7 +371,7 @@ static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
 			banks |= BIT(0);
 			break;
 		case PM8XXX_QCOM_DRIVE_STRENGH:
-			if (arg > PMIC_GPIO_STRENGTH_LOW) {
+			if (arg > PM8921_GPIO_STRENGTH_LOW) {
 				dev_err(pctrl->dev, "invalid drive strength\n");
 				return -EINVAL;
 			}
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
index e5df5ce45a0f..950be952ad3e 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -12,9 +12,14 @@
 #define PMIC_GPIO_PULL_UP_1P5_30	3
 
 #define PMIC_GPIO_STRENGTH_NO		0
-#define PMIC_GPIO_STRENGTH_HIGH		1
+#define PMIC_GPIO_STRENGTH_LOW		1
 #define PMIC_GPIO_STRENGTH_MED		2
-#define PMIC_GPIO_STRENGTH_LOW		3
+#define PMIC_GPIO_STRENGTH_HIGH		3
+
+#define PM8921_GPIO_STRENGTH_NO		0
+#define PM8921_GPIO_STRENGTH_HIGH	1
+#define PM8921_GPIO_STRENGTH_MED	2
+#define PM8921_GPIO_STRENGTH_LOW	3
 
 /*
  * Note: PM8018 GPIO3 and GPIO4 are supporting
-- 
2.35.1