Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <330b5f46-1bd2-5727-b63c-c730fbdda22c@quicinc.com>
Date:   Thu, 8 Sep 2022 16:52:10 -0700
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
 Thunderbird/91.5.0
Subject: Re: [PATCH 2/4] pinctrl: qcom: spmi-gpio: Fix the GPIO strength
 mapping
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        <agross@kernel.org>, <bjorn.andersson@linaro.org>,
        <linus.walleij@linaro.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>
CC:     <konrad.dybcio@somainline.org>, <linux-arm-msm@vger.kernel.org>,
        <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        Anirudh Ghayal <quic_aghayal@quicinc.com>
References: <20220907201528.9351-1-quic_amelende@quicinc.com>
 <20220907201528.9351-3-quic_amelende@quicinc.com>
 <2b809e98-85ea-6ad9-e810-106563937ddc@linaro.org>
From:   Anjelique Melendez <quic_amelende@quicinc.com>
In-Reply-To: <2b809e98-85ea-6ad9-e810-106563937ddc@linaro.org>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 9/8/2022 4:14 AM, Krzysztof Kozlowski wrote:
> On 07/09/2022 22:15, Anjelique Melendez wrote:
>> From: Anirudh Ghayal <quic_aghayal@quicinc.com>
>>
>> The SPMI based PMICs have the HIGH and LOW GPIO output
>> strength mappings interchanged, fix them.
>>
>> Keep the mapping same for older SSBI based PMICs.
>>
>> CRs-Fixed: 2246473
> 
> What is this tag about?
Forgot to remove this tag before up streamed. Will remove for next version.
> 
>> Signed-off-by: Anirudh Ghayal <quic_aghayal@quicinc.com>
>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
>> ---
>>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c     | 2 +-
>>  drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c     | 4 ++--
>>  include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 9 +++++++--
>>  3 files changed, 10 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> index cf6b6047de8d..fceccf1ec099 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> @@ -525,7 +525,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
>>  			pad->pullup = arg;
>>  			break;
>>  		case PMIC_GPIO_CONF_STRENGTH:
>> -			if (arg > PMIC_GPIO_STRENGTH_LOW)
>> +			if (arg > PMIC_GPIO_STRENGTH_HIGH)
>>  				return -EINVAL;
>>  			pad->strength = arg;
>>  			break;
>> diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
>> index 1b41adda8129..0f96d130813b 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
>> @@ -1,7 +1,7 @@
>>  // SPDX-License-Identifier: GPL-2.0-only
>>  /*
>>   * Copyright (c) 2015, Sony Mobile Communications AB.
>> - * Copyright (c) 2013, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2013, 2018 The Linux Foundation. All rights reserved.
>>   */
>>  
>>  #include <linux/module.h>
>> @@ -371,7 +371,7 @@ static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
>>  			banks |= BIT(0);
>>  			break;
>>  		case PM8XXX_QCOM_DRIVE_STRENGH:
>> -			if (arg > PMIC_GPIO_STRENGTH_LOW) {
>> +			if (arg > PM8921_GPIO_STRENGTH_LOW) {
>>  				dev_err(pctrl->dev, "invalid drive strength\n");
>>  				return -EINVAL;
>>  			}
>> diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
>> index e5df5ce45a0f..950be952ad3e 100644
>> --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
>> +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
> 
> You cannot mix bindings with driver. This is an ABI break.
Ack - Will separate into two changes.
>> @@ -12,9 +12,14 @@
>>  #define PMIC_GPIO_PULL_UP_1P5_30	3
>>  
>>  #define PMIC_GPIO_STRENGTH_NO		0
>> -#define PMIC_GPIO_STRENGTH_HIGH		1
>> +#define PMIC_GPIO_STRENGTH_LOW		1
>>  #define PMIC_GPIO_STRENGTH_MED		2
>> -#define PMIC_GPIO_STRENGTH_LOW		3
>> +#define PMIC_GPIO_STRENGTH_HIGH		3
> 
> Didn't you just break all DTSes in the world?
Ack - lol. Next version will include changes to update any DTS
that uses PMIC_GPIO_STRENGTH_ 
> 
> Best regards,
> Krzysztof

Thanks,
Anjelique