Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sergiu Moga <sergiu.moga@microchip.com>
To:     <lee@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <nicolas.ferre@microchip.com>,
        <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
        <radu_nicolae.pirea@upb.ro>, <richard.genoud@gmail.com>,
        <gregkh@linuxfoundation.org>, <broonie@kernel.org>,
        <mturquette@baylibre.com>, <sboyd@kernel.org>,
        <jirislaby@kernel.org>, <sergiu.moga@microchip.com>,
        <admin@hifiphile.com>, <kavyasree.kotagiri@microchip.com>,
        <tudor.ambarus@microchip.com>
CC:     <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>,
        <linux-serial@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v3 02/14] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
Date:   Tue, 13 Sep 2022 17:21:54 +0300
Message-ID: <20220913142205.162399-3-sergiu.moga@microchip.com>
In-Reply-To: <20220913142205.162399-1-sergiu.moga@microchip.com>
References: <20220913142205.162399-1-sergiu.moga@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---


v1 -> v2:
- Nothing, this patch was not here before


v2 -> v3:
- Nothing, previously this was [PATCH 4]


 arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7ade9979e1c6..67bce8d60908 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -258,7 +258,7 @@ &flx5 {
 	status = "okay";
 
 	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 		reg = <0x200 0x200>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
 		dmas = <&dma0
-- 
2.34.1