Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Feedback-ID: i426947f3:Fastmail
From:   Mathew McBride <matt@traverse.com.au>
To:     linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
        jdelvare@suse.com, linux@roeck-us.net,
        krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
        leoyang.li@nxp.com, robh+dt@kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Mathew McBride <matt@traverse.com.au>
Subject: [PATCH 3/3] arm64: dts: ten64: add configuration for fan controller
Date:   Wed, 14 Sep 2022 05:30:30 +0000
Message-Id: <20220914053030.8929-4-matt@traverse.com.au>
In-Reply-To: <20220914053030.8929-1-matt@traverse.com.au>
References: <20220914053030.8929-1-matt@traverse.com.au>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Ten64 desktop appliance has a Noctua NF-A4x20 PWM fan,
controlled by a Microchip EMC2301 PWM fan controller.

This binding allows the fan speed to be slowed to a
quieter level when the system is not busy.

Reference: https://ten64doc.traverse.com.au/hardware/fan-control/

Signed-off-by: Mathew McBride <matt@traverse.com.au>
---
 .../boot/dts/freescale/fsl-ls1088a-ten64.dts  | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..fd8261c9a186 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -87,6 +87,35 @@ sfp_xg1: dpmac1-sfp {
 		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <2000>;
 	};
+
+	thermal-zones {
+		soc {
+			trips {
+				fanmid0: fanmid0 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				fanmax0: fanmax0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map2 {
+					trip = <&fanmid0>;
+					cooling-device = <&case_fan 0 6>;
+				};
+				map3 {
+					trip = <&fanmax0>;
+					cooling-device = <&case_fan 7 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
 
 /* XG1 - Upper SFP */
@@ -231,6 +260,20 @@ at97sc: tpm@29 {
 		compatible = "atmel,at97sc3204t";
 		reg = <0x29>;
 	};
+
+	fanctrl: emc2301@2f {
+		reg = <0x2f>;
+		compatible = "microchip,emc2301";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		case_fan: fan@0 {
+			reg = <0>;
+			min-rpm = /bits/ 16 <3000>;
+			max-rpm = /bits/ 16 <5500>;
+			#cooling-cells = <2>;
+		};
+	};
 };
 
 &i2c2 {
-- 
2.30.1