Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Sender: Guenter Roeck <groeck7@gmail.com>
Date:   Mon, 19 Sep 2022 06:10:36 -0700
From:   Guenter Roeck <linux@roeck-us.net>
To:     Eliav Farber <farbere@amazon.com>
Cc:     jdelvare@suse.com, robh+dt@kernel.org, p.zabel@pengutronix.de,
        rtanwar@maxlinear.com, andriy.shevchenko@intel.com,
        linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, hhhawa@amazon.com, jonnyc@amazon.com,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: Re: [PATCH v5 14/21] hwmon: (mr75203) add VM pre-scaler x2 support
Message-ID: <20220919131036.GA3545566@roeck-us.net>
References: <20220908152449.35457-1-farbere@amazon.com>
 <20220908152449.35457-15-farbere@amazon.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220908152449.35457-15-farbere@amazon.com>
Precedence: bulk

On Thu, Sep 08, 2022 at 03:24:42PM +0000, Eliav Farber wrote:
> Add support for mr76006 pre-scaler which provides divide-by-2 scaling
> of the input voltage, so that it can be  presented to the VM for
> measurement within its range (the VM input range is limited from -0.1V
> to 1V).
> 
> The driver reads from the device-tree all the channels that use the
> mr76006 pre-scaler and multiplies the voltage result by a factor of 2,
> to represent to the user with the actual voltage input source.
> 
> Channels that are not in the device-tree are multiplied by a factor
> of 1.
> 
> Signed-off-by: Eliav Farber <farbere@amazon.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Applied, after resolving a minor conflict against commit d59eacaac953
("hwmon/drivers/mr75203: use HZ macros") from September 2021.
In the future, please base your patch series on the latest upstream
kernel version.

Thanks,
Guenter