Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rajendra Nayak <quic_rjendra@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@somainline.org>, <mturquette@baylibre.com>,
        <sboyd@kernel.org>, <mka@chromium.org>
CC:     <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <johan+linaro@kernel.org>, <quic_kriskura@quicinc.com>,
        <dianders@chromium.org>, <linux-clk@vger.kernel.org>,
        <angelogioacchino.delregno@collabora.com>,
        Rajendra Nayak <quic_rjendra@quicinc.com>
Subject: [PATCH v3 3/3] clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs
Date:   Tue, 20 Sep 2022 16:45:17 +0530
Message-ID: <20220920111517.10407-3-quic_rjendra@quicinc.com>
In-Reply-To: <20220920111517.10407-1-quic_rjendra@quicinc.com>
References: <20220920111517.10407-1-quic_rjendra@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

The USB controllers on sc7280 do not retain the state when
the system goes into low power state and the GDSCs are
turned off. This results in the controllers reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Since sc7280 only supports cx (parent of usb gdscs) Retention, there
are no cxcs offsets mentioned in order to support the Retention
state.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
v3:
Updated the changelog

 drivers/clk/qcom/gcc-sc7280.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 7ff64d4d5920..7b6e5a86c11f 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -3126,7 +3126,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_prim_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
@@ -3135,7 +3135,7 @@ static struct gdsc gcc_usb30_sec_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_sec_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
-- 
2.17.1