Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rasmus Villemoes <linux@rasmusvillemoes.dk>
To:     Alessandro Zummo <a.zummo@towertech.it>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>, linux-rtc@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org
Cc:     Rasmus Villemoes <linux@rasmusvillemoes.dk>
Subject: [PATCH v2 0/9] rtc: isl12022: cleanups and hwmon support
Date:   Wed, 21 Sep 2022 13:46:15 +0200
Message-Id: <20220921114624.3250848-1-linux@rasmusvillemoes.dk>
In-Reply-To: <20220830100152.698506-1-linux@rasmusvillemoes.dk>
References: <20220830100152.698506-1-linux@rasmusvillemoes.dk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series does a few cleanups of the isl12022 driver,

- removes use of deprecated function
- removes some redundant code
- switches to regmap API instead of private helpers

It also provides range_min, range_max values and finally hooks up the
temperatur sensor to hwmon.

Changes in v2:

- Use devm_hwmon_device_register_with_info() (Guenter), and use the
  opportunity to also expose an update_interval with the constant
  value 60000.

- Convert some dev_dbgs to use %ptR, remove a dev_info() (Alexandre)

- Add patch setting range_min, range_max (Alexandre)

Not changed in v2: For now, I've kept the low-battery
dev_warn(). Implementing support for the ioctls RTC_VL_READ/RTC_VL_CLR
is on my radar, but I will need some more time for reading up on and
deciding on the details of what the chip provides and how to map that
information to the various defined RTC_VL_* bits. I also need to
figure out a good way to reliably trigger a low-battery condition so I
can test the ioctl support. So I hope these patches can go in for now
and not be blocked on the series expanding even further.

Rasmus Villemoes (9):
  rtc: isl12022: stop using deprecated devm_rtc_device_register()
  rtc: isl12022: specify range_min and range_max
  rtc: isl12022: drop a dev_info()
  rtc: isl12022: simplify some expressions
  rtc: isl12022: use %ptR
  rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
  rtc: isl12022: drop redundant write to HR register
  rtc: isl12022: switch to using regmap API
  rtc: isl12022: add support for temperature sensor

 drivers/rtc/Kconfig        |   1 +
 drivers/rtc/rtc-isl12022.c | 237 ++++++++++++++++++++-----------------
 2 files changed, 131 insertions(+), 107 deletions(-)

-- 
2.37.2