Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755430AbXFULuI (ORCPT ); Thu, 21 Jun 2007 07:50:08 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754041AbXFULt4 (ORCPT ); Thu, 21 Jun 2007 07:49:56 -0400 Received: from ug-out-1314.google.com ([66.249.92.172]:17833 "EHLO ug-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753889AbXFULtz (ORCPT ); Thu, 21 Jun 2007 07:49:55 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:subject:from:reply-to:to:content-type:date:message-id:mime-version:x-mailer:content-transfer-encoding; b=tlHMjKk7cqykc/nIej+scgF6Di3Yd1kfazEHtdHyIQgpfNqzK4jhhkf70NphFap6yTFDxLVKuzo+VWNzaKJznkNV/4cm+Tvtbb3+TgiwfIboVisMmwnYXWz0xtrd2ZIaoEjfaZvWY7BOIGJyT3/4pgF7tDirlrFLukHja3rRyUs= Subject: Dual slot PCI riser messes up ivtv From: Islam Amer Reply-To: pharon@gmail.com To: linux-kernel@vger.kernel.org Content-Type: text/plain Date: Thu, 21 Jun 2007 14:49:45 +0300 Message-Id: <1182426585.9143.2.camel@iamer-laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.10.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7808 Lines: 178 Hello everyone. I am trying to build a settop box with two cards, a PVR-150 and a DVB card. The mini-ITX motherboard has only one PCI slot, so I bought an active PCI riser. First I tried with two cheap lifeview cards on the riser and they worked. The PVR-150 is working fine alone, and so does the DVB card. But when I use them with the riser nothing works. Here's the debugging output when using both cards on the PCI riser. [ 37.506596] ivtv: ==================== START INIT IVTV ==================== [ 37.506603] ivtv: version 1.0.0 (2.6.22-rc5 SMP mod_unload 586 ) loading [ 37.507978] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 37.508022] ivtv0 info: base addr: 0x48000000 [ 37.508025] ivtv0 info: Enabling pci device [ 37.508048] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 22 [ 37.508060] ivtv0 info: Bus Mastering Enabled. [ 37.508066] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 37.508074] ivtv0 info: 22 (rev 1) at 00:0d.0, irq: 22, latency: 64, memory: 0x48000000 [ 37.508078] ivtv0 info: attempting ioremap at 0x48000000 len 0x00800000 [ 37.508125] ivtv0 info: attempting ioremap at 0x4a000000 len 0x00010000 [ 37.508130] ivtv0 info: Preparing for firmware halt. [ 37.514147] ivtv0 info: Stopping VDM [ 37.514149] ivtv0 info: Stopping AO [ 37.514151] ivtv0 info: pinging (?) APU [ 37.514153] ivtv0 info: Stopping VPU [ 37.514156] ivtv0 info: Resetting Hw Blocks [ 37.514158] ivtv0 info: Stopping SPU [ 37.522095] ivtv0 info: init Encoder SDRAM pre-charge [ 37.522097] ivtv0 info: init Encoder SDRAM refresh to 1us [ 37.522100] ivtv0 info: Sleeping for 600ms (600 recommended) [ 38.121365] ivtv0 info: Loading encoder image [ 38.121406] PM: Adding info for No Bus:0000:00:0d.0 [ 38.226760] PM: Removing info for No Bus:0000:00:0d.0 [ 38.236949] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 38.433021] ivtv0 api: API Call: CX2341X_ENC_PING_FW [ 38.440985] ivtv0 info: Getting firmware version.. [ 38.440989] ivtv0 api: API Call: CX2341X_ENC_GET_VERSION [ 38.448973] ivtv0: Encoder revision: 0x02060039 [ 38.448978] ivtv0 info: GPIO initial dir: 0000c000 out: 00000000 [ 38.448981] ivtv0 info: activating i2c... [ 38.448984] ivtv0 i2c: i2c init [ 38.448988] ivtv0 i2c: setting scl and sda to 1 [ 38.449035] PM: Adding info for No Bus:i2c-0 [ 38.450977] PM: Adding info for i2c:0-0050 [ 38.451003] ivtv0 i2c: i2c client attach [ 38.455940] ivtv0 info: Active card count: 1. [ 38.464603] ivtv0 info: Loaded module tveeprom [ 38.516786] tveeprom 0-0050: Hauppauge model 25019, rev C589, serial# 9928629 [ 38.516790] tveeprom 0-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) [ 38.516794] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 38.516798] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 38.516801] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 38.516805] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter [ 38.516809] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 38.516812] ivtv0 info: PAL tuner detected [ 38.570720] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 38.570739] PM: Adding info for i2c:0-0043 [ 38.570756] ivtv0 i2c: i2c client attach [ 38.570760] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 38.573960] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 38.573967] PM: Adding info for i2c:0-0061 [ 38.573977] ivtv0 i2c: i2c client attach [ 38.587917] ivtv0 info: Loaded module tuner [ 38.623595] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 38.623612] PM: Adding info for i2c:0-0044 [ 38.623631] ivtv0 i2c: i2c client attach [ 38.640454] PM: Adding info for No Bus:0-0044 [ 38.664008] PM: Removing info for No Bus:0-0044 [ 42.138437] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 42.216603] ivtv0 info: Loaded module cx25840 [ 42.256928] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 42.265203] PM: Adding info for i2c:0-001b [ 42.265220] ivtv0 i2c: i2c client attach [ 42.265378] ivtv0 info: Loaded module wm8775 [ 42.265385] ivtv0 i2c: call_i2c_client addr=44 [ 42.304807] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 42.304814] ivtv0 info: Changing input from 1 to 0 [ 42.304818] ivtv0 ioctl: VIDIOC_S_CTRL(00980909, 1) [ 42.304822] ivtv0 i2c: call_i2c_client addr=44 [ 42.307546] ivtv0 info: Mute [ 42.307549] ivtv0 i2c: call_i2c_client addr=44 [ 42.348205] ivtv0 i2c: call_i2c_client addr=1b [ 42.350733] ivtv0 i2c: call_i2c_client addr=44 [ 42.390123] ivtv0 api: API Call: CX2341X_ENC_INITIALIZE_INPUT [ 42.496011] ivtv0 ioctl: VIDIOC_S_CTRL(00980909, 0) [ 42.496020] ivtv0 i2c: call_i2c_client addr=44 [ 42.497922] ivtv0 info: Unmute [ 42.497927] ivtv0 ioctl: VIDIOC_S_CTRL(00980909, 1) [ 42.497929] ivtv0 i2c: call_i2c_client addr=44 [ 42.500652] ivtv0 info: Mute [ 42.500655] ivtv0 info: v4l2 ioctl: set frequency 6400 [ 42.518775] ivtv0 api: API Call: CX2341X_ENC_INITIALIZE_INPUT [ 42.623895] ivtv0 ioctl: VIDIOC_S_CTRL(00980909, 0) [ 42.623904] ivtv0 i2c: call_i2c_client addr=44 [ 42.625806] ivtv0 info: Unmute [ 42.627473] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 42.627481] ivtv0 info: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096kB total) [ 42.629322] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 42.629330] ivtv0 info: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2037kB total) [ 42.629984] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 42.629989] ivtv0 info: Allocate DMA encoder VBI stream: 40 x 26208 buffers (1023kB total) [ 42.630464] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 42.630471] ivtv0 info: Allocate DMA encoder PCM audio stream: 227 x 4608 buffers (1021kB total) [ 42.631139] ivtv0: Registered device radio0 for encoder radio [ 42.631148] ivtv0 info: Switching standard to f. [ 42.661697] ivtv0 irq: Masking interrupts [ 42.661721] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 42.661758] ivtv: ==================== END INIT IVTV ==================== It seems to me that it is initialised correctly. But when I try to use tvtime it gives this error : videoinput: Card failed to allocate capture buffers: Invalid argument Mplayer Just crashes. The other card is messed up as well : [ 37.297009] saa7130/34: v4l2 driver version 0.2.14 loaded [ 37.298400] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 22 [ 37.298413] saa7134[0]: found at 0000:00:05.0, rev: 1, irq: 22, latency: 32, mmio: 0x0 [ 37.298422] saa7134[0]: subsystem: 5168:0300, board: LifeView FlyDVB-S /Acorp TV134DS [card=97,autodetected] [ 37.298428] saa7134[0]: can't get MMIO memory @ 0x0 [ 37.298436] saa7134: probe of 0000:00:05.0 failed with error -16 [ 37.388554] saa7134 ALSA driver for DMA sound loaded [ 37.388561] saa7134 ALSA: no saa7134 cards found I am using ubuntu feisty, and the situation is the same with the distro provided kernel 2.6.20-16-generic and ivtv-0.10.2 I also compiled ivtv-0.10.3 and nothing changed. I even compiled a 2.6.22-rc5 since I found out that the ivtv module got merged in mainline. I emailed this to ivtv mailing list as well as the linux-dvb mailing list, but I thought I would re-post here in case the support team moved after merging with mainline. Can anyone please point me to the right way ? Thank you. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/