Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220922124306.34729-1-dev@pschenker.ch> <20220922124306.34729-5-dev@pschenker.ch>
In-Reply-To: <20220922124306.34729-5-dev@pschenker.ch>
From:   Adrien Grassein <adrien.grassein@gmail.com>
Date:   Thu, 22 Sep 2022 20:26:54 +0200
Message-ID: <CABkfQAEZ1Dyqz=rh2yssq0=4sZrt9GRXJCseCQT-in7+cVrh4g@mail.gmail.com>
Subject: Re: [PATCH 4/4] drm/bridge: lt8912b: clarify lvds output status
To:     Philippe Schenker <dev@pschenker.ch>
Cc:     dri-devel <dri-devel@lists.freedesktop.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Robert Foss <robert.foss@linaro.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        Daniel Vetter <daniel@ffwll.ch>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        David Airlie <airlied@linux.ie>,
        Francesco Dolcini <francesco.dolcini@toradex.com>,
        Philippe Schenker <philippe.schenker@toradex.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Le jeu. 22 sept. 2022 =C3=A0 14:43, Philippe Schenker <dev@pschenker.ch> a =
=C3=A9crit :
>
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>
> Add comments on the lt8912_write_lvds_config() config to document the
> current settings and to make it clear that this is a hardcoded
> configuration not relevant for the HDMI output (could be removed without
> affecting the HDMI port).
>
> No changes on the actual register writes.
>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
> ---
>
>  drivers/gpu/drm/bridge/lontium-lt8912b.c | 26 ++++++++++++++++--------
>  1 file changed, 17 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/b=
ridge/lontium-lt8912b.c
> index 5968f4af190b..3e870d45f881 100644
> --- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
> +++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
> @@ -165,24 +165,32 @@ static int lt8912_write_rxlogicres_config(struct lt=
8912 *lt)
>         return ret;
>  };
>
> +/* enable LVDS output with some hardcoded configuration, not required fo=
r the HDMI output */
>  static int lt8912_write_lvds_config(struct lt8912 *lt)
>  {
>         const struct reg_sequence seq[] =3D {
> +               // lvds power up
>                 {0x44, 0x30},
>                 {0x51, 0x05},
> -               {0x50, 0x24},
> -               {0x51, 0x2d},
> -               {0x52, 0x04},
> -               {0x69, 0x0e},
> +
> +               // core pll bypass
> +               {0x50, 0x24}, // cp=3D50uA
> +               {0x51, 0x2d}, // Pix_clk as reference, second order passi=
ve LPF PLL
> +               {0x52, 0x04}, // loopdiv=3D0, use second-order PLL
> +               {0x69, 0x0e}, // CP_PRESET_DIV_RATIO
>                 {0x69, 0x8e},
>                 {0x6a, 0x00},
> -               {0x6c, 0xb8},
> +               {0x6c, 0xb8}, // RGD_CP_SOFT_K_EN,RGD_CP_SOFT_K[13:8]
>                 {0x6b, 0x51},
> -               {0x04, 0xfb},
> +
> +               {0x04, 0xfb}, // core pll reset
>                 {0x04, 0xff},
> -               {0x7f, 0x00},
> -               {0xa8, 0x13},
> -               {0x02, 0xf7},
> +
> +               // scaler bypass
> +               {0x7f, 0x00}, // disable scaler
> +               {0xa8, 0x13}, // 0x13: JEIDA, 0x33: VESA
> +
> +               {0x02, 0xf7}, // lvds pll reset
>                 {0x02, 0xff},
>                 {0x03, 0xcf},
>                 {0x03, 0xff},
> --
> 2.37.3
>