Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Neil Armstrong <neil.armstrong@linaro.org>
To:     dri-devel@lists.freedesktop.org,
        Adrien Grassein <adrien.grassein@gmail.com>,
        Philippe Schenker <dev@pschenker.ch>
Cc:     Neil Armstrong <neil.armstrong@linaro.org>,
        linux-kernel@vger.kernel.org, Robert Foss <robert.foss@linaro.org>,
        David Airlie <airlied@linux.ie>,
        Daniel Vetter <daniel@ffwll.ch>,
        Philippe Schenker <philippe.schenker@toradex.com>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>
Subject: Re: (subset) [PATCH 0/4] drm/bridge: lt8912b: Fix corrupt display output due to wrong bridge config
Date:   Fri, 23 Sep 2022 09:25:15 +0000
Message-Id: <166392509385.2599200.1091239047831409182.b4-ty@linaro.org>
In-Reply-To: <20220922124306.34729-1-dev@pschenker.ch>
References: <20220922124306.34729-1-dev@pschenker.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

On Thu, 22 Sep 2022 14:43:02 +0200, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> This patch-set fixes the lt8912b driver that currently does not take
> care whether or not the attached display has postiive or negative syncs
> and or reports on EDID if it needs HDMI mode or DVI.
> 
> This series addresses also an issue where the LVDS startup sequence was
> written to the wrong I2C address (the lt8912 has three). This caused
> writing into reserved registers and causing an unstable HDMI picture
> that manifests itself only sometimes and depending on the monitor with a
> flickering and a repeating of going black and coming up again. While at
> it move also some sensible comments to the sequence.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[4/4] drm/bridge: lt8912b: clarify lvds output status
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=fc44f3636a4db6544fd1532280e8adcd1ef13ba2

-- 
Neil