Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Lev Popov <leo@nabam.net>
To:     Peter Geis <pgwipeout@gmail.com>
Cc:     Dan Johansen <strit@manjaro.org>, Lev Popov <leo@nabam.net>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiko Stuebner <heiko@sntech.de>,
        Nicolas Frattaroli <frattaroli.nicolas@gmail.com>,
        Michael Riesch <michael.riesch@wolfvision.net>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] arm64: dts: rockchip: fix quartz64-a bluetooth configuration
Date:   Mon, 26 Sep 2022 07:54:33 +0200
Message-Id: <20220926055435.31284-1-leo@nabam.net>
In-Reply-To: <CAMdYzYpdhJ-wWN9UAppQvaNqK8Y_RadYv2v67gD5S_u=1ZXw0Q@mail.gmail.com>
References: <CAMdYzYpdhJ-wWN9UAppQvaNqK8Y_RadYv2v67gD5S_u=1ZXw0Q@mail.gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.

Fixes: b33a22a1e7c4248608e533fc4fa524258b3fae84 (arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A)

Signed-off-by: Lev Popov <leo@nabam.net>
---
 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..91908081c5ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@ &uart0 {
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	status = "okay";
 	uart-has-rtscts;
 
@@ -748,8 +748,8 @@ bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-- 
2.37.3