Received: by 2002:a05:6359:c8b:b0:c7:702f:21d4 with SMTP id go11csp545805rwb; Mon, 26 Sep 2022 02:36:43 -0700 (PDT) X-Google-Smtp-Source: AMsMyM7Yaq8z9xlhIREKHw3vljKwlcBUOJLl8eK4n4FMEBqpXRxS2KnRgBcOLt4o9cO74qlYUsYi X-Received: by 2002:a17:903:11cd:b0:170:cde8:18b7 with SMTP id q13-20020a17090311cd00b00170cde818b7mr21018770plh.165.1664185003372; Mon, 26 Sep 2022 02:36:43 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1664185003; cv=none; d=google.com; s=arc-20160816; b=Jqo5f2srL58PxYnpXdB1pPocjOecYvZp6QrKPQfA/dzt0IWpCW5HrKGuVPA7dmwwT6 l8TjEpfvOrqPXvejrRIYCBDUM9X7eIAXJcIqOfoYVkbncsPaCHxnpQCt2mc3v4ZXC2t/ mV90U+DXvy5hZgnwHZqp6vU45F2/UBhRGSsCrs2O49aMr7ItUwRLfl9laHYhCrtpB42C fykzgB9ctbQuoTl1CsZDKii+8JsUotbC4OtEiHjmtAWzubOu8xPMfjwJ4WCrfysx48pC lDYXW665gNjEWWIERpjBPq8fYxpfeU0J/wrjJig7I2VXBnBfUXAI4/V9hFQOL9DrdyAU 1lsQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:in-reply-to:content-disposition:mime-version :references:message-id:subject:cc:to:from:date:dkim-signature; bh=fSGFt1dCUzt10jSw+PyOYNCqewxRLDNF3lMnH90KYx0=; b=gnbgSNClwBVjcWzZoy4It7BCkU3gGRqqm7eI+pJvPPNYAzta7z9HMj4Rf8oXW1mGAk vQM4f1uZRnGOet/VYsTaBr3GX+xyyPbuufmiaGoaVsFMZJlvA3kt2wbaR07vjQ//1euh LMIsE6Sgk0pdQxBMfZkdgERV5g2cBhMUXIbkCiF2RLLfyb1hwUjNzwFaYKW1AS0odkZf 71/4wCD8/pRYHejbG63+HlzTKIKN46f71yzkVSCnkjTxC/tXedSZrGPUZG8CY1DMr13J XWq9fGKdTSyNg0hY67wfDfK6c4B3Bm8VfiLybWlsjr1RGWxcgVI9ESwbNzm8EhTkX8ji /dBQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=Iu+Iu4YM; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id f26-20020a63755a000000b0042c6b7ed5a8si17351883pgn.596.2022.09.26.02.36.31; Mon, 26 Sep 2022 02:36:43 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=Iu+Iu4YM; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234640AbiIZJAR (ORCPT + 99 others); Mon, 26 Sep 2022 05:00:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54504 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234594AbiIZI7z (ORCPT ); Mon, 26 Sep 2022 04:59:55 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CBCB3BC5; Mon, 26 Sep 2022 01:59:50 -0700 (PDT) Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id D5287415; Mon, 26 Sep 2022 10:59:46 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1664182787; bh=p/z/tejKhhE192GX/DyRGf+N0sgbw8/xP+NJhtI3zDU=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=Iu+Iu4YMnIt6+vv4wdqI7AYxVJrMEVes1XKndf9aVJmNqS/LEZB3fjmoevV/YXXij U+a65ejInVWN4xZXrq/y1Kkxhb5+belXKfDM7wQezCBiauV4B7RshVH61JMLGs5AuZ KRUqQ4wY24e4+emRLg22wn0SQnI8AHv3PmlkRtiY= Date: Mon, 26 Sep 2022 11:59:31 +0300 From: Laurent Pinchart To: "Lad, Prabhakar" Cc: Lad Prabhakar , Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Philipp Zabel , Jacopo Mondi , Niklas =?utf-8?Q?S=C3=B6derlund?= , Sakari Ailus , Hans Verkuil , Geert Uytterhoeven , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Biju Das Subject: Re: [PATCH v2 4/4] media: platform: Add Renesas RZ/G2L CRU driver Message-ID: References: <20220905230406.30801-1-prabhakar.mahadev-lad.rj@bp.renesas.com> <20220905230406.30801-5-prabhakar.mahadev-lad.rj@bp.renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,SPF_PASS, T_PDS_OTHER_BAD_TLD autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Prabhakar, On Fri, Sep 23, 2022 at 08:02:12PM +0100, Lad, Prabhakar wrote: > On Thu, Sep 22, 2022 at 4:29 PM Laurent Pinchart wrote: > > On Tue, Sep 06, 2022 at 12:04:06AM +0100, Lad Prabhakar wrote: > > > Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit. > > > > > > Based on a patch in the BSP by Hien Huynh > > > > > > > > > Signed-off-by: Lad Prabhakar > > > --- > > > v1 -> v2 > > > * No change > > > > > > RFC v2 -> v1 > > > * Moved the driver to renesas folder > > > * Fixed review comments pointed by Jacopo > > > > > > RFC v1 -> RFC v2 > > > * Dropped group > > > * Dropped CSI subdev and implemented as new driver > > > * Dropped "mc_" from function names > > > * Moved the driver to renesas folder > > > --- > > > .../media/platform/renesas/rzg2l-cru/Kconfig | 17 + > > > .../media/platform/renesas/rzg2l-cru/Makefile | 3 + > > > .../platform/renesas/rzg2l-cru/rzg2l-core.c | 395 ++++++++++ > > > .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 152 ++++ > > > .../platform/renesas/rzg2l-cru/rzg2l-dma.c | 734 ++++++++++++++++++ > > > .../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 368 +++++++++ > > > > I'd merge those two files together, they both handle the video node. > > There's a comment below that recommends adding a subdev, that should > > then go to a separate file. > > OK, I'll merge these files into rzg2l-video.c. > > > > 6 files changed, 1669 insertions(+) > > > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c > > > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h > > > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c > > > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c > > > > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig > > > index 57c40bb499df..08ff0e96b3f5 100644 > > > --- a/drivers/media/platform/renesas/rzg2l-cru/Kconfig > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig > > > @@ -15,3 +15,20 @@ config VIDEO_RZG2L_CSI2 > > > > > > To compile this driver as a module, choose M here: the > > > module will be called rzg2l-csi2. > > > + > > > +config VIDEO_RZG2L_CRU > > > + tristate "RZ/G2L Camera Receiving Unit (CRU) Driver" > > > + depends on ARCH_RENESAS || COMPILE_TEST > > > + depends on V4L_PLATFORM_DRIVERS > > > + depends on VIDEO_DEV && OF > > > + select MEDIA_CONTROLLER > > > + select V4L2_FWNODE > > > + select VIDEOBUF2_DMA_CONTIG > > > + select VIDEO_RZG2L_CSI2 > > > > Is this required, can't the CRU be used with a parallel sensor without > > the CSI-2 receiver ? > > Yes the CRU can be used with parallel sensors, I'll drop the above select. > > > > + select VIDEO_V4L2_SUBDEV_API > > > + help > > > + Support for Renesas RZ/G2L (and alike SoC's) Camera Receiving > > > + Unit (CRU) driver. > > > + > > > + To compile this driver as a module, choose M here: the > > > + module will be called rzg2l-cru. > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile > > > index 91ea97a944e6..7628809e953f 100644 > > > --- a/drivers/media/platform/renesas/rzg2l-cru/Makefile > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile > > > @@ -1,3 +1,6 @@ > > > # SPDX-License-Identifier: GPL-2.0 > > > > > > obj-$(CONFIG_VIDEO_RZG2L_CSI2) += rzg2l-csi2.o > > > + > > > +rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o > > > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c > > > new file mode 100644 > > > index 000000000000..b5d4110b1913 > > > --- /dev/null > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c > > > @@ -0,0 +1,395 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Driver for Renesas RZ/G2L CRU > > > + * > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > + * > > > + * Based on Renesas R-Car VIN > > > + * Copyright (C) 2011-2013 Renesas Solutions Corp. > > > + * Copyright (C) 2013 Cogent Embedded, Inc., > > > + * Copyright (C) 2008 Magnus Damm > > > + */ > > > + > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > + > > > +#include > > > +#include > > > + > > > +#include "rzg2l-cru.h" > > > + > > > +#define v4l2_dev_to_cru(d) container_of(d, struct rzg2l_cru_dev, v4l2_dev) > > > > As this macro is only used to get the rzg2l_cru_dev pointer from the > > v4l2_async_notifier pointer, you can replace it with > > > > #define notifier_to_cru(n) container_of(n, struct rzg2l_cru_dev, notifier) > > > > I would also turn it into a static inline function for additional > > compile-time type safety. > > OK, I will do it as mentioned above. > > > > + > > > +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags, > > > + unsigned int notification) > > > +{ > > > + struct media_entity *entity; > > > + struct rzg2l_cru_dev *cru; > > > + struct media_pad *csi_pad; > > > + struct v4l2_subdev *sd; > > > + int ret; > > > + > > > + ret = v4l2_pipeline_link_notify(link, flags, notification); > > > + if (ret) > > > + return ret; > > > + > > > + /* Only care about link enablement for CRU nodes. */ > > > + if (!(flags & MEDIA_LNK_FL_ENABLED)) > > > + return 0; > > > + > > > + cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev); > > > + /* > > > + * Don't allow link changes if any entity in the graph is > > > + * streaming, modifying the CHSEL register fields can disrupt > > > + * running streams. > > > + */ > > > + media_device_for_each_entity(entity, &cru->mdev) > > > + if (media_entity_is_streaming(entity)) > > > + return -EBUSY; > > > + > > > + mutex_lock(&cru->mdev_lock); > > > + > > > + csi_pad = media_pad_remote_pad_first(&cru->vdev.entity.pads[0]); > > > + if (csi_pad) { > > > + ret = -EMLINK; > > > + goto out; > > > + } > > > + > > > + sd = media_entity_to_v4l2_subdev(link->source->entity); > > > + if (cru->csi.subdev == sd) { > > > + cru->csi.channel = link->source->index - 1; > > > + cru->is_csi = true; > > > + } else { > > > + ret = -ENODEV; > > > + } > > > + > > > +out: > > > + mutex_unlock(&cru->mdev_lock); > > > + > > > + return ret; > > > +} > > > + > > > +static const struct media_device_ops rzg2l_cru_media_ops = { > > > + .link_notify = rzg2l_cru_csi2_link_notify, > > > +}; > > > + > > > +/* ----------------------------------------------------------------------------- > > > + * Group async notifier > > > + */ > > > + > > > +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier) > > > +{ > > > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev); > > > + unsigned int i; > > > + int ret; > > > + > > > + ret = media_device_register(&cru->mdev); > > > + if (ret) > > > + return ret; > > > > I'd move the v4l2_device_register() call here, as it's the V4L2 > > counterpart of the media device, and handling them together would be > > best. > > OK. > > > > + > > > + ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev); > > > + if (ret) { > > > + dev_err(cru->dev, "Failed to register subdev nodes\n"); > > > + return ret; > > > + } > > > + > > > + if (!video_is_registered(&cru->vdev)) { > > > > Can this happen ? > > No, I'll drop this check. > > > > + ret = rzg2l_cru_v4l2_register(cru); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > + /* Create all media device links between CRU and CSI-2's. */ > > > + /* > > > + * TODO: RZ/G2L supports 4 VC0, as support for virtual channels > > > + * should be implemented by streams API which is under development > > > + * so for now just link it to VC0 > > > + */ > > > > The streams API won't require more links, so I'd drop the comment and > > the loop and create a single link. > > OK. > > > > + for (i = 1; i <= 1; i++) { > > > + struct media_entity *source, *sink; > > > + > > > + source = &cru->csi.subdev->entity; > > > + sink = &cru->vdev.entity; > > > > Hmmm... I'd recommend adding a subdev to model the image processing > > pipeline of the CRU, between the CSI-2 receiver and the video node. That > > will help when you'll add support for parallel sensors, and it will also > > be needed by the streams API to select which virtual channel to capture. > > just model as a dummy subdev for now (MEDIA_ENT_F_VID_MUX)? I think MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER would be more appropriate. > > > + > > > + ret = media_create_pad_link(source, i, sink, 0, 0); > > > + if (ret) { > > > + dev_err(cru->dev, "Error adding link from %s to %s\n", > > > + source->name, sink->name); > > > + break; > > > + } > > > + } > > > + > > > + return ret; > > > +} > > > + > > > +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier, > > > + struct v4l2_subdev *subdev, > > > + struct v4l2_async_subdev *asd) > > > +{ > > > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev); > > > + > > > + rzg2l_cru_v4l2_unregister(cru); > > > + > > > + mutex_lock(&cru->mdev_lock); > > > + > > > + if (cru->csi.asd == asd) { > > > + cru->csi.subdev = NULL; > > > + dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name); > > > + } > > > + > > > + mutex_unlock(&cru->mdev_lock); > > > + > > > + media_device_unregister(&cru->mdev); > > > +} > > > + > > > +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier, > > > + struct v4l2_subdev *subdev, > > > + struct v4l2_async_subdev *asd) > > > +{ > > > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev); > > > + > > > + mutex_lock(&cru->mdev_lock); > > > + > > > + if (cru->csi.asd == asd) { > > > + cru->csi.subdev = subdev; > > > + dev_dbg(cru->dev, "Bound CSI-2 %s\n", subdev->name); > > > + } > > > + > > > + mutex_unlock(&cru->mdev_lock); > > > + > > > + return 0; > > > +} > > > + > > > +static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = { > > > + .bound = rzg2l_cru_group_notify_bound, > > > + .unbind = rzg2l_cru_group_notify_unbind, > > > + .complete = rzg2l_cru_group_notify_complete, > > > +}; > > > + > > > +static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id) > > > > The id parameter is always 0, I'd drop it. > > Agreed, I will drop it. > > > > +{ > > > + struct v4l2_fwnode_endpoint vep = { > > > + .bus_type = V4L2_MBUS_CSI2_DPHY, > > > + }; > > > + struct fwnode_handle *ep, *fwnode; > > > + struct v4l2_async_subdev *asd; > > > + int ret; > > > + > > > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0); > > > + if (!ep) > > > + return 0; > > > + > > > + fwnode = fwnode_graph_get_remote_endpoint(ep); > > > + ret = v4l2_fwnode_endpoint_parse(ep, &vep); > > > + fwnode_handle_put(ep); > > > + if (ret) { > > > + dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode)); > > > + ret = -EINVAL; > > > + goto out; > > > + } > > > + > > > + if (!of_device_is_available(to_of_node(fwnode))) { > > > + dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n", > > > + to_of_node(fwnode)); > > > + ret = -ENOTCONN; > > > + goto out; > > > + } > > > + > > > + asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode, > > > + struct v4l2_async_subdev); > > > + if (IS_ERR(asd)) { > > > + ret = PTR_ERR(asd); > > > + goto out; > > > + } > > > + > > > + cru->csi.asd = asd; > > > + > > > + dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n", > > > + to_of_node(fwnode), vep.base.id); > > > +out: > > > + fwnode_handle_put(fwnode); > > > + > > > + return ret; > > > +} > > > + > > > +static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru) > > > +{ > > > + int ret; > > > + > > > + v4l2_async_nf_init(&cru->notifier); > > > + > > > + ret = rvin_mc_parse_of(cru, 0); > > > + if (ret) > > > + return ret; > > > + > > > + cru->notifier.ops = &rzg2l_cru_async_ops; > > > + > > > + if (list_empty(&cru->notifier.asd_list)) > > > + return 0; > > > + > > > + ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier); > > > + if (ret < 0) { > > > + dev_err(cru->dev, "Notifier registration failed\n"); > > > + v4l2_async_nf_cleanup(&cru->notifier); > > > + return ret; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru) > > > > The naming is a bit weird, as this isn't related to CSI-2. I would name > > the function rzg2l_cru_media_init(). > > Agreed, I will rename it. > > > > +{ > > > + struct media_device *mdev = NULL; > > > + const struct of_device_id *match; > > > + int ret; > > > + > > > + cru->pad.flags = MEDIA_PAD_FL_SINK; > > > + ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad); > > > + if (ret) > > > + return ret; > > > + > > > + mutex_init(&cru->mdev_lock); > > > + mdev = &cru->mdev; > > > + mdev->dev = cru->dev; > > > + mdev->ops = &rzg2l_cru_media_ops; > > > + > > > + match = of_match_node(cru->dev->driver->of_match_table, > > > + cru->dev->of_node); > > > + > > > + strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name)); > > > + strscpy(mdev->model, match->compatible, sizeof(mdev->model)); > > > + snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s", > > > + dev_name(mdev->dev)); > > > + > > > + cru->v4l2_dev.mdev = &cru->mdev; > > > + > > > + media_device_init(mdev); > > > + > > > + ret = rzg2l_cru_mc_parse_of_graph(cru); > > > + if (ret) { > > > + mutex_lock(&cru->mdev_lock); > > > + cru->v4l2_dev.mdev = NULL; > > > + mutex_unlock(&cru->mdev_lock); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_probe(struct platform_device *pdev) > > > +{ > > > + struct rzg2l_cru_dev *cru; > > > + int irq, ret; > > > + > > > + cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL); > > > + if (!cru) > > > + return -ENOMEM; > > > + > > > + cru->base = devm_platform_ioremap_resource(pdev, 0); > > > + if (IS_ERR(cru->base)) > > > + return PTR_ERR(cru->base); > > > + > > > + cru->presetn = devm_reset_control_get(&pdev->dev, "presetn"); > > > + if (IS_ERR(cru->presetn)) > > > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn), > > > + "failed to get cpg presetn\n"); > > > + > > > + cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn"); > > > + if (IS_ERR(cru->aresetn)) > > > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn), > > > + "failed to get cpg aresetn\n"); > > > + > > > + cru->vclk = devm_clk_get(&pdev->dev, "vclk"); > > > + if (IS_ERR(cru->vclk)) { > > > + dev_err(&pdev->dev, "Failed to get vclk"); > > > + return PTR_ERR(cru->vclk); > > > > You could use dev_err_probe() here too (as well as below). > > OK. > > > > + } > > > + > > > + cru->pclk = devm_clk_get(&pdev->dev, "pclk"); > > > + if (IS_ERR(cru->pclk)) { > > > + dev_err(&pdev->dev, "Failed to get pclk"); > > > + return PTR_ERR(cru->pclk); > > > + } > > > + > > > + cru->aclk = devm_clk_get(&pdev->dev, "aclk"); > > > + if (IS_ERR(cru->aclk)) { > > > + dev_err(&pdev->dev, "Failed to get aclk"); > > > + return PTR_ERR(cru->aclk); > > > + } > > > + > > > + cru->dev = &pdev->dev; > > > + cru->info = of_device_get_match_data(&pdev->dev); > > > + > > > + irq = platform_get_irq(pdev, 0); > > > + if (irq < 0) > > > + return irq; > > > + > > > + ret = rzg2l_cru_dma_register(cru, irq); > > > + if (ret) > > > + return ret; > > > + > > > + platform_set_drvdata(pdev, cru); > > > + > > > + ret = rzg2l_cru_csi2_init(cru); > > > + if (ret) > > > + goto error_dma_unregister; > > > + > > > + cru->num_buf = HW_BUFFER_DEFAULT; > > > + pm_suspend_ignore_children(&pdev->dev, true); > > > + pm_runtime_enable(&pdev->dev); > > > + > > > + return 0; > > > + > > > +error_dma_unregister: > > > + rzg2l_cru_dma_unregister(cru); > > > + > > > + return ret; > > > +} > > > + > > > +static const struct of_device_id rzg2l_cru_of_id_table[] = { > > > + { > > > + .compatible = "renesas,rzg2l-cru", > > > + }, > > > + { /* sentinel */ } > > > +}; > > > +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table); > > > + > > > +static int rzg2l_cru_remove(struct platform_device *pdev) > > > +{ > > > + struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev); > > > + > > > + pm_runtime_disable(&pdev->dev); > > > + > > > + rzg2l_cru_v4l2_unregister(cru); > > > + > > > + v4l2_async_nf_unregister(&cru->notifier); > > > + v4l2_async_nf_cleanup(&cru->notifier); > > > + > > > + media_device_cleanup(&cru->mdev); > > > + mutex_destroy(&cru->mdev_lock); > > > + cru->v4l2_dev.mdev = NULL; > > > > Is this needed ? > > Not required. > > > > + > > > + rzg2l_cru_dma_unregister(cru); > > > + > > > + return 0; > > > +} > > > + > > > +static struct platform_driver rzg2l_cru_driver = { > > > + .driver = { > > > + .name = "rzg2l-cru", > > > + .of_match_table = rzg2l_cru_of_id_table, > > > + }, > > > + .probe = rzg2l_cru_probe, > > > + .remove = rzg2l_cru_remove, > > > > No PM ? > > I plan to gradually add at a later point. > > > > +}; > > > + > > > +module_platform_driver(rzg2l_cru_driver); > > > + > > > +MODULE_AUTHOR("Lad Prabhakar "); > > > +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver"); > > > +MODULE_LICENSE("GPL"); > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h > > > new file mode 100644 > > > index 000000000000..a834680a3200 > > > --- /dev/null > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h > > > @@ -0,0 +1,152 @@ > > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > +/* > > > + * Driver for Renesas RZ/G2L CRU > > > + * > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > + * > > > > Extra blank line. > > Oops, I will drop it. > > > > + */ > > > + > > > +#ifndef __RZG2L_CRU__ > > > +#define __RZG2L_CRU__ > > > + > > > +#include > > > + > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > + > > > +/* Number of HW buffers */ > > > +#define HW_BUFFER_MAX 8 > > > +#define HW_BUFFER_DEFAULT 3 > > > > Could you prefix macro names with CRU_ (or RZG2L_CRU_, up to you) ? > > These names are a bit generic and could lead to clashes. > > Agreed, I will rename it. > > > > + > > > +/* Address alignment mask for HW buffers */ > > > +#define HW_BUFFER_MASK 0x1ff > > > + > > > +/* Maximum number of CSI2 virtual channels */ > > > +#define CSI2_VCHANNEL 4 > > > + > > > +#define CRU_MAX_INPUT_WIDTH 2800 > > > +#define CRU_MAX_INPUT_HEIGHT 4095 > > > + > > > +/** > > > + * enum rzg2l_cru_dma_state - DMA states > > > + * @RZG2L_CRU_DMA_STOPPED: No operation in progress > > > + * @RZG2L_CRU_DMA_STARTING: Capture starting up > > > + * @RZG2L_CRU_DMA_RUNNING: Operation in progress have buffers > > > + * @RZG2L_CRU_DMA_STOPPING: Stopping operation > > > + */ > > > +enum rzg2l_cru_dma_state { > > > + RZG2L_CRU_DMA_STOPPED = 0, > > > + RZG2L_CRU_DMA_STARTING, > > > + RZG2L_CRU_DMA_RUNNING, > > > + RZG2L_CRU_DMA_STOPPING, > > > +}; > > > + > > > +struct rzg2l_cru_csi { > > > + struct v4l2_async_subdev *asd; > > > + struct v4l2_subdev *subdev; > > > + u32 channel; > > > +}; > > > + > > > +/** > > > + * struct rzg2l_cru_dev - Renesas CRU device structure > > > + * @dev: (OF) device > > > + * @base: device I/O register space remapped to virtual memory > > > + * @info: info about CRU instance > > > + * > > > + * @presetn: CRU_PRESETN reset line > > > + * @aresetn: CRU_ARESETN reset line > > > + * > > > + * @vclk: CRU Main clock > > > + * @pclk: CPU Register access clock > > > + * @aclk: CRU image transfer clock > > > + * > > > + * @vdev: V4L2 video device associated with CRU > > > + * @v4l2_dev: V4L2 device > > > + * @ctrl_handler: V4L2 control handler > > > + * @num_buf: Holds the current number of buffers enabled > > > + * @notifier: V4L2 asynchronous subdevs notifier > > > + * > > > + * @csi: CSI info > > > + * @mdev: media device > > > + * @mdev_lock: protects the count, notifier and csi members > > > + * @pad: media pad for the video device entity > > > + * > > > + * @lock: protects @queue > > > + * @queue: vb2 buffers queue > > > + * @scratch: cpu address for scratch buffer > > > + * @scratch_phys: physical address of the scratch buffer > > > + * > > > + * @qlock: protects @queue_buf, @buf_list, @sequence > > > + * @state > > > + * @queue_buf: Keeps track of buffers given to HW slot > > > + * @buf_list: list of queued buffers > > > + * @sequence: V4L2 buffers sequence number > > > + * @state: keeps track of operation state > > > + * > > > + * @is_csi: flag to mark the CRU as using a CSI-2 subdevice > > > + * > > > + * @input_is_yuv: flag to mark the input format of CRU > > > + * @output_is_yuv: flag to mark the output format of CRU > > > + * > > > + * @mbus_code: media bus format code > > > + * @format: active V4L2 pixel format > > > + * > > > + * @compose: active composing > > > + */ > > > +struct rzg2l_cru_dev { > > > + struct device *dev; > > > + void __iomem *base; > > > + const struct rzg2l_cru_info *info; > > > + > > > + struct reset_control *presetn; > > > + struct reset_control *aresetn; > > > + > > > + struct clk *vclk; > > > + struct clk *pclk; > > > + struct clk *aclk; > > > + > > > + struct video_device vdev; > > > + struct v4l2_device v4l2_dev; > > > + u8 num_buf; > > > + > > > + struct v4l2_async_notifier notifier; > > > + > > > + struct rzg2l_cru_csi csi; > > > + struct media_device mdev; > > > + struct mutex mdev_lock; > > > + struct media_pad pad; > > > + > > > + struct mutex lock; > > > + struct vb2_queue queue; > > > + void *scratch; > > > + dma_addr_t scratch_phys; > > > + > > > + spinlock_t qlock; > > > + struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX]; > > > + struct list_head buf_list; > > > + unsigned int sequence; > > > + enum rzg2l_cru_dma_state state; > > > + > > > + bool is_csi; > > > + > > > + bool input_is_yuv; > > > + bool output_is_yuv; > > > + > > > + u32 mbus_code; > > > + struct v4l2_pix_format format; > > > + > > > + struct v4l2_rect compose; > > > +}; > > > + > > > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq); > > > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru); > > > + > > > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru); > > > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru); > > > + > > > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format); > > > + > > > +#endif > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c > > > new file mode 100644 > > > index 000000000000..44efd071f562 > > > --- /dev/null > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c > > > @@ -0,0 +1,734 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Driver for Renesas RZ/G2L CRU > > > + * > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > + * > > > + * Based on Renesas R-Car VIN > > > + * Copyright (C) 2011-2013 Renesas Solutions Corp. > > > + * Copyright (C) 2013 Cogent Embedded, Inc., > > > + * Copyright (C) 2008 Magnus Damm > > > + */ > > > + > > > +#include > > > +#include > > > +#include > > > + > > > +#include > > > + > > > +#include "rzg2l-cru.h" > > > +#include "rzg2l-csi2.h" > > > + > > > +/* HW CRU Registers Definition */ > > > +/* CRU Control Register */ > > > +#define CRUnCTRL 0x0 > > > +#define CRUnCTRL_VINSEL(x) ((x) << 0) > > > + > > > +/* CRU Interrupt Enable Register */ > > > +#define CRUnIE 0x4 > > > +#define CRUnIE_SFE BIT(16) > > > +#define CRUnIE_EFE BIT(17) > > > + > > > +/* CRU Interrupt Status Register */ > > > +#define CRUnINTS 0x8 > > > +#define CRUnINTS_SFS BIT(16) > > > + > > > +/* CRU Reset Register */ > > > +#define CRUnRST 0xc > > > +#define CRUnRST_VRESETN BIT(0) > > > + > > > +/* Memory Bank Base Address (Lower) Register for CRU Image Data */ > > > +#define AMnMBxADDRL(x) (0x100 + ((x) * 8)) > > > + > > > +/* Memory Bank Base Address (Higher) Register for CRU Image Data */ > > > +#define AMnMBxADDRH(x) (0x104 + ((x) * 8)) > > > + > > > +/* Memory Bank Enable Register for CRU Image Data */ > > > +#define AMnMBVALID 0x148 > > > +#define AMnMBVALID_MBVALID(x) GENMASK(x, 0) > > > + > > > +/* Memory Bank Status Register for CRU Image Data */ > > > +#define AMnMBS 0x14c > > > +#define AMnMBS_MBSTS 0x7 > > > + > > > +/* AXI Master FIFO Pointer Register for CRU Image Data */ > > > +#define AMnFIFOPNTR 0x168 > > > +#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0) > > > +#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16) > > > + > > > +/* AXI Master Transfer Stop Register for CRU Image Data */ > > > +#define AMnAXISTP 0x174 > > > +#define AMnAXISTP_AXI_STOP BIT(0) > > > + > > > +/* AXI Master Transfer Stop Status Register for CRU Image Data */ > > > +#define AMnAXISTPACK 0x178 > > > +#define AMnAXISTPACK_AXI_STOP_ACK BIT(0) > > > + > > > +/* CRU Image Processing Enable Register */ > > > +#define ICnEN 0x200 > > > +#define ICnEN_ICEN BIT(0) > > > + > > > +/* CRU Image Processing Main Control Register */ > > > +#define ICnMC 0x208 > > > +#define ICnMC_CSCTHR BIT(5) > > > +#define ICnMC_INF_YUV8_422 (0x1e << 16) > > > +#define ICnMC_INF_USER (0x30 << 16) > > > +#define ICnMC_VCSEL(x) ((x) << 22) > > > +#define ICnMC_INF_MASK GENMASK(21, 16) > > > + > > > +/* CRU Module Status Register */ > > > +#define ICnMS 0x254 > > > +#define ICnMS_IA BIT(2) > > > + > > > +/* CRU Data Output Mode Register */ > > > +#define ICnDMR 0x26c > > > +#define ICnDMR_YCMODE_UYVY (1 << 4) > > > + > > > +#define RZG2L_TIMEOUT_MS 100 > > > +#define RZG2L_RETRIES 10 > > > + > > > +struct rzg2l_cru_buffer { > > > + struct vb2_v4l2_buffer vb; > > > + struct list_head list; > > > +}; > > > + > > > +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \ > > > + struct rzg2l_cru_buffer, \ > > > + vb)->list) > > > + > > > +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value) > > > +{ > > > + iowrite32(value, cru->base + offset); > > > +} > > > + > > > +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset) > > > +{ > > > + return ioread32(cru->base + offset); > > > +} > > > + > > > +/* Need to hold qlock before calling */ > > > +static void return_unused_buffers(struct rzg2l_cru_dev *cru, > > > + enum vb2_buffer_state state) > > > +{ > > > + struct rzg2l_cru_buffer *buf, *node; > > > + unsigned long flags; > > > + unsigned int i; > > > + > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + for (i = 0; i < cru->num_buf; i++) { > > > + if (cru->queue_buf[i]) { > > > + vb2_buffer_done(&cru->queue_buf[i]->vb2_buf, > > > + state); > > > + cru->queue_buf[i] = NULL; > > > + } > > > + } > > > + > > > + list_for_each_entry_safe(buf, node, &cru->buf_list, list) { > > > + vb2_buffer_done(&buf->vb.vb2_buf, state); > > > + list_del(&buf->list); > > > + } > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > +} > > > + > > > +static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, > > > + unsigned int *nplanes, unsigned int sizes[], > > > + struct device *alloc_devs[]) > > > +{ > > > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq); > > > + > > > + /* Make sure the image size is large enough. */ > > > + if (*nplanes) > > > + return sizes[0] < cru->format.sizeimage ? -EINVAL : 0; > > > + > > > + *nplanes = 1; > > > + sizes[0] = cru->format.sizeimage; > > > + > > > + return 0; > > > +}; > > > + > > > +static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb) > > > +{ > > > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue); > > > + unsigned long size = cru->format.sizeimage; > > > + > > > + if (vb2_plane_size(vb, 0) < size) { > > > + dev_err(cru->dev, "buffer too small (%lu < %lu)\n", > > > + vb2_plane_size(vb, 0), size); > > > + return -EINVAL; > > > + } > > > + > > > + vb2_set_plane_payload(vb, 0, size); > > > + > > > + return 0; > > > +} > > > + > > > +static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb) > > > +{ > > > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > > > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue); > > > + unsigned long flags; > > > + > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + > > > + list_add_tail(to_buf_list(vbuf), &cru->buf_list); > > > + > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > +} > > > + > > > +static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru, > > > + struct v4l2_subdev *sd, > > > + struct media_pad *pad) > > > +{ > > > + struct v4l2_subdev_format fmt = { > > > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > > > + }; > > > + > > > + fmt.pad = pad->index; > > > + if (v4l2_subdev_call_state_active(sd, pad, get_fmt, &fmt)) > > > + return -EPIPE; > > > + > > > + if (cru->is_csi) { > > > + switch (fmt.format.code) { > > > + case MEDIA_BUS_FMT_UYVY8_1X16: > > > + break; > > > + default: > > > + return -EPIPE; > > > + } > > > + } > > > + cru->mbus_code = fmt.format.code; > > > + > > > + switch (fmt.format.field) { > > > + case V4L2_FIELD_TOP: > > > + case V4L2_FIELD_BOTTOM: > > > + case V4L2_FIELD_NONE: > > > + case V4L2_FIELD_INTERLACED_TB: > > > + case V4L2_FIELD_INTERLACED_BT: > > > + case V4L2_FIELD_INTERLACED: > > > + case V4L2_FIELD_SEQ_TB: > > > + case V4L2_FIELD_SEQ_BT: > > > + break; > > > + default: > > > + return -EPIPE; > > > + } > > > + > > > + if (fmt.format.width != cru->format.width || > > > + fmt.format.height != cru->format.height || > > > + fmt.format.code != cru->mbus_code) > > > + return -EPIPE; > > > + > > > + return 0; > > > +} > > > + > > > +static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru, > > > + int slot, dma_addr_t addr) > > > +{ > > > + const struct v4l2_format_info *fmt; > > > + int offsetx, offsety; > > > + dma_addr_t offset; > > > + > > > + fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat); > > > + > > > + /* > > > + * There is no HW support for composition do the best we can > > > + * by modifying the buffer offset > > > + */ > > > + offsetx = cru->compose.left * fmt->bpp[0]; > > > + offsety = cru->compose.top * cru->format.bytesperline; > > > + offset = addr + offsetx + offsety; > > > + > > > + /* > > > + * The address needs to be 512 bytes aligned. Driver should never accept > > > + * settings that do not satisfy this in the first place... > > > + */ > > > + if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK)) > > > + return; > > > + > > > + /* Currently, we just use the buffer in 32 bits address */ > > > + rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset); > > > + rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0); > > > +} > > > + > > > +/* > > > + * Moves a buffer from the queue to the HW slot. If no buffer is > > > + * available use the scratch buffer. The scratch buffer is never > > > + * returned to userspace, its only function is to enable the capture > > > + * loop to keep running. > > > + */ > > > +static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot) > > > +{ > > > + struct vb2_v4l2_buffer *vbuf; > > > + struct rzg2l_cru_buffer *buf; > > > + dma_addr_t phys_addr; > > > + > > > + /* A already populated slot shall never be overwritten. */ > > > + if (WARN_ON(cru->queue_buf[slot])) > > > + return; > > > + > > > + dev_dbg(cru->dev, "Filling HW slot: %d\n", slot); > > > + > > > + if (list_empty(&cru->buf_list)) { > > > + cru->queue_buf[slot] = NULL; > > > + phys_addr = cru->scratch_phys; > > > + } else { > > > + /* Keep track of buffer we give to HW */ > > > + buf = list_entry(cru->buf_list.next, > > > + struct rzg2l_cru_buffer, list); > > > + vbuf = &buf->vb; > > > + list_del_init(to_buf_list(vbuf)); > > > + cru->queue_buf[slot] = vbuf; > > > + > > > + /* Setup DMA */ > > > + phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0); > > > + } > > > + > > > + rzg2l_cru_set_slot_addr(cru, slot, phys_addr); > > > +} > > > + > > > +static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru) > > > +{ > > > + unsigned int slot; > > > + > > > + /* > > > + * Set image data memory banks. > > > + * Currently, we will use maximum address. > > > + */ > > > + rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1)); > > > + > > > + for (slot = 0; slot < cru->num_buf; slot++) > > > + rzg2l_cru_fill_hw_slot(cru, slot); > > > +} > > > + > > > +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru) > > > +{ > > > + u32 icnmc; > > > + > > > + switch (cru->mbus_code) { > > > + case MEDIA_BUS_FMT_UYVY8_1X16: > > > + icnmc = ICnMC_INF_YUV8_422; > > > + cru->input_is_yuv = true; > > > + break; > > > + default: > > > + cru->input_is_yuv = false; > > > + icnmc = ICnMC_INF_USER; > > > + break; > > > + } > > > + > > > + icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK); > > > + > > > + /* Set virtual channel CSI2 */ > > > + icnmc |= ICnMC_VCSEL(cru->csi.channel); > > > + > > > + rzg2l_cru_write(cru, ICnMC, icnmc); > > > +} > > > + > > > +static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru) > > > +{ > > > + u32 icndmr; > > > + > > > + if (cru->is_csi) > > > + rzg2l_cru_csi2_setup(cru); > > > + > > > + /* Output format */ > > > + switch (cru->format.pixelformat) { > > > + case V4L2_PIX_FMT_UYVY: > > > + icndmr = ICnDMR_YCMODE_UYVY; > > > + cru->output_is_yuv = true; > > > + break; > > > + default: > > > + dev_err(cru->dev, "Invalid pixelformat (0x%x)\n", > > > + cru->format.pixelformat); > > > + return -EINVAL; > > > + } > > > + > > > + /* If input and output use same colorspace, do bypass mode */ > > > + if (cru->output_is_yuv == cru->input_is_yuv) > > > + rzg2l_cru_write(cru, ICnMC, > > > + rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR); > > > + else > > > + rzg2l_cru_write(cru, ICnMC, > > > + rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR)); > > > + > > > + /* Set output data format */ > > > + rzg2l_cru_write(cru, ICnDMR, icndmr); > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on) > > > +{ > > > + struct rzg2l_csi2 *csi2 = sd_to_csi2(cru->csi.subdev); > > > + struct media_pipeline *pipe; > > > + struct v4l2_subdev *sd; > > > + struct media_pad *pad; > > > + unsigned long flags; > > > + int ret; > > > + > > > + pad = media_pad_remote_pad_first(&cru->pad); > > > + if (!pad) > > > + return -EPIPE; > > > + > > > + sd = media_entity_to_v4l2_subdev(pad->entity); > > > + > > > + if (!on) { > > > + media_pipeline_stop(&cru->vdev.entity); > > > + return v4l2_subdev_call(sd, video, s_stream, 0); > > > + } > > > + > > > + ret = rzg2l_cru_mc_validate_format(cru, sd, pad); > > > + if (ret) > > > + return ret; > > > + > > > + rzg2l_csi2_dphy_setting(csi2, 1); > > > + > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + > > > + /* Select a video input */ > > > + if (cru->is_csi) > > > + rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0)); > > > + > > > + /* Cancel the software reset for image processing block */ > > > + rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN); > > > + > > > + /* Disable and clear the interrupt before using */ > > > + rzg2l_cru_write(cru, CRUnIE, 0); > > > + rzg2l_cru_write(cru, CRUnINTS, 0x001f000f); > > > + > > > + /* Initialize the AXI master */ > > > + rzg2l_cru_initialize_axi(cru); > > > + > > > + /* Initialize image convert */ > > > + ret = rzg2l_cru_initialize_image_conv(cru); > > > + if (ret) { > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > + return ret; > > > + } > > > + > > > + /* Enable interrupt */ > > > + rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE); > > > + > > > + /* Enable image processing reception */ > > > + rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN); > > > + > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > + > > > + pipe = sd->entity.pipe ? sd->entity.pipe : &cru->vdev.pipe; > > > + ret = media_pipeline_start(&cru->vdev.entity, pipe); > > > + if (ret) > > > + return ret; > > > + > > > + clk_disable_unprepare(cru->vclk); > > > + > > > + rzg2l_csi2_mipi_link_setting(csi2, 1); > > > + > > > + ret = clk_prepare_enable(cru->vclk); > > > + if (ret) > > > + return ret; > > > + > > > + rzg2l_csi2_cmn_rstb_deassert(csi2); > > > + > > > + ret = v4l2_subdev_call(sd, video, s_stream, 1); > > > + if (ret == -ENOIOCTLCMD) > > > + ret = 0; > > > + if (ret) > > > + media_pipeline_stop(&cru->vdev.entity); > > > + > > > + return ret; > > > +} > > > + > > > +static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru) > > > +{ > > > + struct rzg2l_csi2 *csi2 = sd_to_csi2(cru->csi.subdev); > > > + u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y; > > > + unsigned int retries = 0; > > > + unsigned long flags; > > > + u32 icnms; > > > + > > > + cru->state = RZG2L_CRU_DMA_STOPPING; > > > + > > > + rzg2l_cru_set_stream(cru, 0); > > > + > > > + rzg2l_csi2_dphy_setting(csi2, 0); > > > + > > > + rzg2l_csi2_mipi_link_setting(csi2, 0); > > > + > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + > > > + /* Disable and clear the interrupt */ > > > + rzg2l_cru_write(cru, CRUnIE, 0); > > > + rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F); > > > + > > > + /* Stop the operation of image conversion */ > > > + rzg2l_cru_write(cru, ICnEN, 0); > > > + > > > + /* Wait for streaming to stop */ > > > + while ((rzg2l_cru_read(cru, ICnMS) & ICnMS_IA) && retries++ < RZG2L_RETRIES) { > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > + msleep(RZG2L_TIMEOUT_MS); > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + } > > > + > > > + icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA; > > > + if (icnms) > > > + dev_err(cru->dev, "Failed stop HW, something is seriously broken\n"); > > > + > > > + cru->state = RZG2L_CRU_DMA_STOPPED; > > > + > > > + /* Wait until the FIFO becomes empty */ > > > + for (retries = 5; retries > 0; retries--) { > > > + amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR); > > > + > > > + amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR; > > > + amnfifopntr_r_y = > > > + (amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16; > > > + if (amnfifopntr_w == amnfifopntr_r_y) > > > + break; > > > + > > > + usleep_range(10, 20); > > > + } > > > + > > > + /* Notify that FIFO is not empty here */ > > > + if (!retries) > > > + dev_err(cru->dev, "Failed to empty FIFO\n"); > > > + > > > + /* Stop AXI bus */ > > > + rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP); > > > + > > > + /* Wait until the AXI bus stop */ > > > + for (retries = 5; retries > 0; retries--) { > > > + if (rzg2l_cru_read(cru, AMnAXISTPACK) & > > > + AMnAXISTPACK_AXI_STOP_ACK) > > > + break; > > > + > > > + usleep_range(10, 20); > > > + }; > > > + > > > + /* Notify that AXI bus can not stop here */ > > > + if (!retries) > > > + dev_err(cru->dev, "Failed to stop AXI bus\n"); > > > + > > > + /* Cancel the AXI bus stop request */ > > > + rzg2l_cru_write(cru, AMnAXISTP, 0); > > > + > > > + /* Resets the image processing module */ > > > + rzg2l_cru_write(cru, CRUnRST, 0); > > > + > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > + > > > + /* Set reset state */ > > > + reset_control_assert(cru->aresetn); > > > +} > > > + > > > +static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count) > > > +{ > > > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq); > > > + int ret; > > > + > > > + /* Release reset state */ > > > + ret = reset_control_deassert(cru->aresetn); > > > + if (ret) { > > > + dev_err(cru->dev, "failed to deassert aresetn\n"); > > > + return ret; > > > + } > > > + > > > + /* Allocate scratch buffer. */ > > > + cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage, > > > + &cru->scratch_phys, GFP_KERNEL); > > > + if (!cru->scratch) { > > > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED); > > > + dev_err(cru->dev, "Failed to allocate scratch buffer\n"); > > > + return -ENOMEM; > > > + } > > > + > > > + cru->sequence = 0; > > > + > > > + ret = rzg2l_cru_set_stream(cru, 1); > > > + if (ret) { > > > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED); > > > + goto out; > > > + } > > > + > > > + cru->state = RZG2L_CRU_DMA_STARTING; > > > + > > > + dev_dbg(cru->dev, "Starting to capture\n"); > > > + > > > +out: > > > + if (ret) > > > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch, > > > + cru->scratch_phys); > > > + > > > + return ret; > > > +} > > > + > > > +static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq) > > > +{ > > > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq); > > > + > > > + rzg2l_cru_stop_streaming(cru); > > > + > > > + /* Free scratch buffer */ > > > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch, > > > + cru->scratch_phys); > > > + > > > + return_unused_buffers(cru, VB2_BUF_STATE_ERROR); > > > +} > > > + > > > +static const struct vb2_ops rzg2l_cru_qops = { > > > + .queue_setup = rzg2l_cru_queue_setup, > > > + .buf_prepare = rzg2l_cru_buffer_prepare, > > > + .buf_queue = rzg2l_cru_buffer_queue, > > > + .start_streaming = rzg2l_cru_start_streaming_vq, > > > + .stop_streaming = rzg2l_cru_stop_streaming_vq, > > > + .wait_prepare = vb2_ops_wait_prepare, > > > + .wait_finish = vb2_ops_wait_finish, > > > +}; > > > + > > > +static irqreturn_t rzg2l_cru_irq(int irq, void *data) > > > +{ > > > + struct rzg2l_cru_dev *cru = data; > > > + unsigned int handled = 0; > > > + unsigned long flags; > > > + u32 irq_status; > > > + u32 amnmbs; > > > + int slot; > > > + > > > + spin_lock_irqsave(&cru->qlock, flags); > > > + > > > + irq_status = rzg2l_cru_read(cru, CRUnINTS); > > > + if (!irq_status) > > > + goto done; > > > + > > > + handled = 1; > > > + > > > + rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS)); > > > + > > > + /* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */ > > > + if (cru->state == RZG2L_CRU_DMA_STOPPED) { > > > + dev_dbg(cru->dev, "IRQ while state stopped\n"); > > > + goto done; > > > + } > > > + > > > + /* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */ > > > + if (cru->state == RZG2L_CRU_DMA_STOPPING) { > > > + if (irq_status & CRUnINTS_SFS) > > > + dev_dbg(cru->dev, "IRQ while state stopping\n"); > > > + goto done; > > > + } > > > + > > > + /* Prepare for capture and update state */ > > > + amnmbs = rzg2l_cru_read(cru, AMnMBS); > > > + slot = amnmbs & AMnMBS_MBSTS; > > > + > > > + /* > > > + * AMnMBS.MBSTS indicates the destination of Memory Bank (MB). > > > + * Recalculate to get the current transfer complete MB. > > > + */ > > > + if (slot == 0) > > > + slot = cru->num_buf - 1; > > > + else > > > + slot--; > > > + > > > + /* > > > + * To hand buffers back in a known order to userspace start > > > + * to capture first from slot 0. > > > + */ > > > + if (cru->state == RZG2L_CRU_DMA_STARTING) { > > > + if (slot != 0) { > > > + dev_dbg(cru->dev, "Starting sync slot: %d\n", slot); > > > + goto done; > > > + } > > > + > > > + dev_dbg(cru->dev, "Capture start synced!\n"); > > > + cru->state = RZG2L_CRU_DMA_RUNNING; > > > + } > > > + > > > + /* Capture frame */ > > > + if (cru->queue_buf[slot]) { > > > + cru->queue_buf[slot]->field = cru->format.field; > > > + cru->queue_buf[slot]->sequence = cru->sequence; > > > + cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns(); > > > + vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf, > > > + VB2_BUF_STATE_DONE); > > > + cru->queue_buf[slot] = NULL; > > > + } else { > > > + /* Scratch buffer was used, dropping frame. */ > > > + dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence); > > > + } > > > + > > > + cru->sequence++; > > > + > > > + /* Prepare for next frame */ > > > + rzg2l_cru_fill_hw_slot(cru, slot); > > > + > > > +done: > > > + spin_unlock_irqrestore(&cru->qlock, flags); > > > + > > > + return IRQ_RETVAL(handled); > > > +} > > > + > > > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru) > > > +{ > > > + mutex_destroy(&cru->lock); > > > + > > > + v4l2_device_unregister(&cru->v4l2_dev); > > > + reset_control_assert(cru->presetn); > > > +} > > > + > > > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq) > > > +{ > > > + struct vb2_queue *q = &cru->queue; > > > + unsigned int i; > > > + int ret; > > > + > > > + ret = reset_control_deassert(cru->presetn); > > > + if (ret) { > > > + dev_err(cru->dev, "failed to deassert presetn\n"); > > > + return ret; > > > + } > > > > Shouldn't this be done when starting streaming instead ? > > Agreed, Ill move it there. > > > > + > > > + /* Initialize the top-level structure */ > > > + ret = v4l2_device_register(cru->dev, &cru->v4l2_dev); > > > + if (ret) > > > + return ret; > > > + > > > + mutex_init(&cru->lock); > > > + INIT_LIST_HEAD(&cru->buf_list); > > > + > > > + spin_lock_init(&cru->qlock); > > > + > > > + cru->state = RZG2L_CRU_DMA_STOPPED; > > > + > > > + for (i = 0; i < HW_BUFFER_MAX; i++) > > > + cru->queue_buf[i] = NULL; > > > + > > > + /* buffer queue */ > > > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > > > + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF; > > > > No VB2_READ please, that's very inefficient. > > OK, I'll drop it. > > > > + q->lock = &cru->lock; > > > + q->drv_priv = cru; > > > + q->buf_struct_size = sizeof(struct rzg2l_cru_buffer); > > > + q->ops = &rzg2l_cru_qops; > > > + q->mem_ops = &vb2_dma_contig_memops; > > > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > > > + q->min_buffers_needed = 4; > > > > Does the hardware really require 4 buffers to operate ? > > v4l2-compliance complains about sequnce mismatch when set to 3. Then maybe there's another problem somewhere ? What's the minimum number of buffers the hardware can operate with ? > > > + q->dev = cru->dev; > > > + > > > + ret = vb2_queue_init(q); > > > + if (ret < 0) { > > > + dev_err(cru->dev, "failed to initialize VB2 queue\n"); > > > + goto error; > > > + } > > > + > > > + /* IRQ */ > > > + ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED, > > > + KBUILD_MODNAME, cru); > > > + if (ret) { > > > + dev_err(cru->dev, "failed to request irq\n"); > > > + goto error; > > > + } > > > + > > > + return 0; > > > + > > > +error: > > > + rzg2l_cru_dma_unregister(cru); > > > + return ret; > > > +} > > > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c > > > new file mode 100644 > > > index 000000000000..c565597f5769 > > > --- /dev/null > > > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c > > > @@ -0,0 +1,368 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Driver for Renesas RZ/G2L CRU > > > + * > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > + * > > > + * Based on Renesas R-Car VIN > > > + * Copyright (C) 2016 Renesas Electronics Corp. > > > + * Copyright (C) 2011-2013 Renesas Solutions Corp. > > > + * Copyright (C) 2013 Cogent Embedded, Inc., > > > + * Copyright (C) 2008 Magnus Damm > > > + */ > > > + > > > +#include > > > + > > > +#include > > > +#include > > > +#include > > > +#include > > > + > > > +#include "rzg2l-cru.h" > > > + > > > +#define RZG2L_CRU_DEFAULT_FORMAT V4L2_PIX_FMT_UYVY > > > +#define RZG2L_CRU_DEFAULT_WIDTH 800 > > > +#define RZG2L_CRU_DEFAULT_HEIGHT 600 > > > +#define RZG2L_CRU_DEFAULT_FIELD V4L2_FIELD_NONE > > > +#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB > > > + > > > +/* ----------------------------------------------------------------------------- > > > + * Format Conversions > > > + */ > > > + > > > +static const struct v4l2_format_info rzg2l_cru_formats[] = { > > > + { > > > + .format = V4L2_PIX_FMT_UYVY, > > > + .bpp[0] = 2, > > > + }, > > > +}; > > > + > > > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format) > > > +{ > > > + unsigned int i; > > > + > > > + for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++) > > > + if (rzg2l_cru_formats[i].format == format) > > > + return rzg2l_cru_formats + i; > > > + > > > + return NULL; > > > +} > > > + > > > +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix) > > > +{ > > > + const struct v4l2_format_info *fmt; > > > + > > > + fmt = rzg2l_cru_format_from_pixel(pix->pixelformat); > > > + > > > + if (WARN_ON(!fmt)) > > > + return -EINVAL; > > > + > > > + return pix->width * fmt->bpp[0]; > > > +} > > > + > > > +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix) > > > +{ > > > + return pix->bytesperline * pix->height; > > > +} > > > + > > > +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru, > > > + struct v4l2_pix_format *pix) > > > +{ > > > + if (!rzg2l_cru_format_from_pixel(pix->pixelformat)) > > > + pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT; > > > + > > > + switch (pix->field) { > > > + case V4L2_FIELD_TOP: > > > + case V4L2_FIELD_BOTTOM: > > > + case V4L2_FIELD_NONE: > > > + case V4L2_FIELD_INTERLACED_TB: > > > + case V4L2_FIELD_INTERLACED_BT: > > > + case V4L2_FIELD_INTERLACED: > > > + break; > > > + default: > > > + pix->field = RZG2L_CRU_DEFAULT_FIELD; > > > + break; > > > + } > > > + > > > + /* Limit to CRU capabilities */ > > > + v4l_bound_align_image(&pix->width, 320, CRU_MAX_INPUT_WIDTH, 1, > > > + &pix->height, 240, CRU_MAX_INPUT_HEIGHT, 2, 0); > > > + > > > + pix->bytesperline = rzg2l_cru_format_bytesperline(pix); > > > + pix->sizeimage = rzg2l_cru_format_sizeimage(pix); > > > + > > > + dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n", > > > + pix->width, pix->height, pix->bytesperline, pix->sizeimage); > > > +} > > > + > > > +static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru, > > > + struct v4l2_pix_format *pix) > > > +{ > > > + /* > > > + * The V4L2 specification clearly documents the colorspace fields > > > + * as being set by drivers for capture devices. Using the values > > > + * supplied by userspace thus wouldn't comply with the API. Until > > > + * the API is updated force fixed values. > > > + */ > > > + pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE; > > > + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); > > > + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace); > > > + pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace, > > > + pix->ycbcr_enc); > > > + > > > + rzg2l_cru_format_align(cru, pix); > > > +} > > > + > > > +static int rzg2l_cru_querycap(struct file *file, void *priv, > > > + struct v4l2_capability *cap) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + > > > + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); > > > + strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card)); > > > + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", > > > + dev_name(cru->dev)); > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv, > > > + struct v4l2_format *f) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + > > > + rzg2l_cru_try_format(cru, &f->fmt.pix); > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv, > > > + struct v4l2_format *f) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + > > > + if (vb2_is_busy(&cru->queue)) > > > + return -EBUSY; > > > + > > > + rzg2l_cru_try_format(cru, &f->fmt.pix); > > > + > > > + cru->format = f->fmt.pix; > > > + > > > + cru->compose.top = 0; > > > + cru->compose.left = 0; > > > + cru->compose.width = cru->format.width; > > > + cru->compose.height = cru->format.height; > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv, > > > + struct v4l2_format *f) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + > > > + f->fmt.pix = cru->format; > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv, > > > + struct v4l2_fmtdesc *f) > > > +{ > > > + if (f->index >= ARRAY_SIZE(rzg2l_cru_formats)) > > > + return -EINVAL; > > > + > > > + f->pixelformat = rzg2l_cru_formats[f->index].format; > > > + > > > + return 0; > > > +} > > > + > > > +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh, > > > + const struct v4l2_event_subscription *sub) > > > +{ > > > + switch (sub->type) { > > > + case V4L2_EVENT_SOURCE_CHANGE: > > > + return v4l2_event_subscribe(fh, sub, 4, NULL); > > > + } > > > + return v4l2_ctrl_subscribe_event(fh, sub); > > > +} > > > + > > > +static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = { > > > + .vidioc_querycap = rzg2l_cru_querycap, > > > + .vidioc_try_fmt_vid_cap = rzg2l_cru_try_fmt_vid_cap, > > > + .vidioc_g_fmt_vid_cap = rzg2l_cru_g_fmt_vid_cap, > > > + .vidioc_s_fmt_vid_cap = rzg2l_cru_s_fmt_vid_cap, > > > + .vidioc_enum_fmt_vid_cap = rzg2l_cru_enum_fmt_vid_cap, > > > + > > > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > > > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > > > + .vidioc_querybuf = vb2_ioctl_querybuf, > > > + .vidioc_qbuf = vb2_ioctl_qbuf, > > > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > > > + .vidioc_expbuf = vb2_ioctl_expbuf, > > > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > > > + .vidioc_streamon = vb2_ioctl_streamon, > > > + .vidioc_streamoff = vb2_ioctl_streamoff, > > > + > > > + .vidioc_log_status = v4l2_ctrl_log_status, > > > + .vidioc_subscribe_event = rzg2l_cru_subscribe_event, > > > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > > > +}; > > > + > > > +/* ----------------------------------------------------------------------------- > > > + * Media controller file operations > > > + */ > > > + > > > +static int rzg2l_cru_open(struct file *file) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + int ret; > > > + > > > + ret = clk_prepare_enable(cru->pclk); > > > + if (ret) > > > + return ret; > > > + > > > + ret = clk_prepare_enable(cru->vclk); > > > + if (ret) > > > + goto disable_pclk; > > > + > > > + ret = clk_prepare_enable(cru->aclk); > > > + if (ret) > > > + goto disable_vclk; > > > + > > > + ret = mutex_lock_interruptible(&cru->lock); > > > + if (ret) > > > + goto disable_aclk; > > > + > > > + file->private_data = cru; > > > + ret = v4l2_fh_open(file); > > > + if (ret) > > > + goto err_unlock; > > > + > > > + ret = v4l2_pipeline_pm_get(&cru->vdev.entity); > > > + if (ret < 0) > > > + goto err_open; > > > + > > > + mutex_unlock(&cru->lock); > > > + > > > + return 0; > > > +err_open: > > > + v4l2_fh_release(file); > > > +err_unlock: > > > + mutex_unlock(&cru->lock); > > > +disable_aclk: > > > + clk_disable_unprepare(cru->aclk); > > > +disable_vclk: > > > + clk_disable_unprepare(cru->vclk); > > > +disable_pclk: > > > + clk_disable_unprepare(cru->pclk); > > > + > > > + return ret; > > > +} > > > + > > > +static int rzg2l_cru_release(struct file *file) > > > +{ > > > + struct rzg2l_cru_dev *cru = video_drvdata(file); > > > + int ret; > > > + > > > + mutex_lock(&cru->lock); > > > + > > > + /* the release helper will cleanup any on-going streaming. */ > > > + ret = _vb2_fop_release(file, NULL); > > > + > > > + v4l2_pipeline_pm_put(&cru->vdev.entity); > > > + clk_disable_unprepare(cru->aclk); > > > + clk_disable_unprepare(cru->vclk); > > > + clk_disable_unprepare(cru->pclk); > > > + > > > + mutex_unlock(&cru->lock); > > > + > > > + return ret; > > > +} > > > + > > > +static const struct v4l2_file_operations rzg2l_cru_fops = { > > > + .owner = THIS_MODULE, > > > + .unlocked_ioctl = video_ioctl2, > > > + .open = rzg2l_cru_open, > > > + .release = rzg2l_cru_release, > > > + .poll = vb2_fop_poll, > > > + .mmap = vb2_fop_mmap, > > > + .read = vb2_fop_read, > > > +}; > > > + > > > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru) > > > +{ > > > + if (!video_is_registered(&cru->vdev)) > > > + return; > > > + > > > + v4l2_info(&cru->v4l2_dev, "Removed %s\n", > > > + video_device_node_name(&cru->vdev)); > > > > You can use dev_info(), but I'd actually use dev_dbg(). Same below. > > OK, I will switch to dev_dbg(). > > > > + > > > + /* Checks internally if vdev have been init or not */ > > > + video_unregister_device(&cru->vdev); > > > +} > > > + > > > +static void rzg2l_cru_notify(struct v4l2_subdev *sd, > > > + unsigned int notification, void *arg) > > > +{ > > > + struct rzg2l_cru_dev *cru = > > > + container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev); > > > + struct v4l2_subdev *remote; > > > + struct media_pad *pad; > > > + > > > + pad = media_pad_remote_pad_first(&cru->pad); > > > + if (!pad) > > > + return; > > > + > > > + remote = media_entity_to_v4l2_subdev(pad->entity); > > > + if (remote != sd) > > > + return; > > > + > > > + switch (notification) { > > > + case V4L2_DEVICE_NOTIFY_EVENT: > > > + v4l2_event_queue(&cru->vdev, arg); > > > + break; > > > + } > > > +} > > > > Drop this, userspace should listen for events on the subdevices that > > generate them. > > OK so in that case I can completely get rid of rzg2l_cru_notify(). > > > > + > > > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru) > > > +{ > > > + struct video_device *vdev = &cru->vdev; > > > + int ret; > > > + > > > + cru->v4l2_dev.notify = rzg2l_cru_notify; > > > + > > > + /* video node */ > > > + vdev->v4l2_dev = &cru->v4l2_dev; > > > + vdev->queue = &cru->queue; > > > + snprintf(vdev->name, sizeof(vdev->name), "CRU output"); > > > + vdev->release = video_device_release_empty; > > > + vdev->lock = &cru->lock; > > > + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | > > > + V4L2_CAP_READWRITE; > > > > No read/write please. > > OK, I will drop it. > > > > + > > > + /* Set a default format */ > > > + cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT; > > > + cru->format.width = RZG2L_CRU_DEFAULT_WIDTH; > > > + cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT; > > > + cru->format.field = RZG2L_CRU_DEFAULT_FIELD; > > > + cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE; > > > + > > > + vdev->device_caps |= V4L2_CAP_IO_MC; > > > + vdev->fops = &rzg2l_cru_fops; > > > + vdev->ioctl_ops = &rzg2l_cru_ioctl_ops; > > > + > > > + rzg2l_cru_format_align(cru, &cru->format); > > > > I'd perform all this initialization in an init function called at probe > > time, with only the actual registration left here, to be done at bound > > time. > > Agrreed, Ill create a rzg2l_cru_v4l2_init() for it. -- Regards, Laurent Pinchart