Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sean Anderson <sean.anderson@seco.com>
To:     "David S . Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Madalin Bucur <madalin.bucur@nxp.com>,
        Camelia Alexandra Groza <camelia.groza@nxp.com>,
        netdev@vger.kernel.org
Cc:     Eric Dumazet <edumazet@google.com>,
        Paolo Abeni <pabeni@redhat.com>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Russell King <linux@armlinux.org.uk>,
        "linuxppc-dev @ lists . ozlabs . org" <linuxppc-dev@lists.ozlabs.org>,
        Sean Anderson <sean.anderson@seco.com>,
        Benjamin Herrenschmidt <benh@kernel.crashing.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Li Yang <leoyang.li@nxp.com>,
        Michael Ellerman <mpe@ellerman.id.au>,
        Paul Mackerras <paulus@samba.org>,
        Rob Herring <robh+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org
Subject: [PATCH net-next v5 0/9] [RFT] net: dpaa: Convert to phylink
Date:   Mon, 26 Sep 2022 15:03:12 -0400
Message-Id: <20220926190322.2889342-1-sean.anderson@seco.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?F7v3G4XFrVyeOeEgZFYSDX6FUdzia7/8JB46cmkgLyYjU7recVpsPcEYyNtD?=
 =?us-ascii?Q?fZ4qkU9UUX5ixBvSEeaPBKFQexizLgLLDhgweyiDyO8QFcJhW9VM+46PWWWL?=
 =?us-ascii?Q?DxbVsr2aIEjctgvmRhnGnSMTt5xOLP21WQrvpwG5eE5S2sjkSggO+7AsKl0b?=
 =?us-ascii?Q?5JfCDakfdcYaZaKszG0eYf4i76oQQCKJFAlXHkIeqYJx/vVfi3vVEv9VjhNG?=
 =?us-ascii?Q?r6kcN0nmAIJDbaQneWVeYuCgvY5jWf2GGYT3GNcduNVDJAuv+rwnnUMzvl+1?=
 =?us-ascii?Q?50tlzuZcIvRJXT05tpIJLOVaHoXEZsVT1KJ22chVSkQpyDcDlPqWNTSPOlW6?=
 =?us-ascii?Q?u3VGiBzLxYCkJunwrV/XO89o0ui1nsApxMOLnheDFVJe3AnVT9NJJON2lQfJ?=
 =?us-ascii?Q?9IscA6tD5QKtMjrxQgqoa81hlnMpc12yGql3sv8jbz+ASVo5BqfEhbxNQpeE?=
 =?us-ascii?Q?KeEqMrL21CQTKwVjXLyYMPRdnHowd1QbBzuafMnjMhefpgt10dX9/W/NpQr4?=
 =?us-ascii?Q?VM562ha/bqri1XcuLpyLy6+Py3LjcQjamzJ3qUBuowHTBVL9r8nhou9fyvug?=
 =?us-ascii?Q?g3BGKed4rYiAfHDSNd3s1IOVAk/HkzCK6XUjtjxK/y19Li8GbXbi5ImNhrYw?=
 =?us-ascii?Q?c8E1jcH3iSICPLsSbLoRMwdhvmGa0VVTb74pfD/YhZDdN8bV0+VOonOFShzA?=
 =?us-ascii?Q?hkgTYuaxFaoLjZ1haINfZagILw9XhOES5HbVtOJLqOqp9R3kQJtzsuxf0BVA?=
 =?us-ascii?Q?SfoGq0/rU8yhPLRYEGZx20cNc6wvcBylNqhIDqXl8HsvxvZXPKk3IK0Z/dhV?=
 =?us-ascii?Q?Nr6Oa/e1S6vEXKYTH1bMaiHYzJ9wTFbj3cS97t1w2PmLx8eIBdZesVVeioBx?=
 =?us-ascii?Q?IQyZzPxEO9EhQoTi0Vdv+Ri80uOpRBHL5wNUB3dGPrSw3ZtiD4eLrF3KmE8q?=
 =?us-ascii?Q?rXaWh/Z07e2hLTMDzp4JKnEWLBkDcFMygWca0ikk0hRy2Qb5SXdeNT93Kdy5?=
 =?us-ascii?Q?XCnJP9vMkge+xCN06DyPz0WBM/HrfciZEj1y0OpI+bxTSaPAzY0nL8LqNMb1?=
 =?us-ascii?Q?WmRS/Gm6Jb2giRQGlgV5k/dQtTvW2qLGErxjdvOKIEuKK68tIjmiyroZng4W?=
 =?us-ascii?Q?QHdPvCHKjwq55+mTk9nkUQVygozvFydFb9c9LA5xFfMEGUqv+VZk/PcVc3lI?=
 =?us-ascii?Q?xXCn30o3yngHnhcC5BJVvojrE+gt1ODUTo6dvax3YpACxcLFYUngez7QLkXu?=
 =?us-ascii?Q?VyLFCmKt49d0mCAsby5R3bwNNQAFBaijw6Zw63hWJ8q5fnNiF+RJGB5ORBjI?=
 =?us-ascii?Q?Et+/AHt9i5lOKM4/sCvGRTDVwrNjN8B7ry7HdQrAR5ZmsRnSEHr5p/vgLvaS?=
 =?us-ascii?Q?U+Ru9jVWeLinHoSecHBE54YtoajcI7Gjp/cQQF60WTXOHdeOTEq5i+5jNuOg?=
 =?us-ascii?Q?qpKN57B8fs0VXw0259o94aO4/SbMdpoDl6MeGX1c5nGo4F0Pmr9JxkeHi9rn?=
 =?us-ascii?Q?MTc1uFRc5C+U+seVIcyb5q0uvLtqJfGZ4VO0VOb5Q0l5SxBqrmCabbutRum6?=
 =?us-ascii?Q?1PaMcfglz/4NgXi9VrujiE1V+Ru9Wyy832rgqthMxwMVtUqI2TZf7kX+dTHs?=
 =?us-ascii?Q?dQ=3D=3D?=
X-OriginatorOrg: seco.com
X-MS-Exchange-CrossTenant-Network-Message-Id: ad1e1957-0a0f-4931-dc96-08da9ff1ce46
X-MS-Exchange-CrossTenant-AuthSource: DB7PR03MB4972.eurprd03.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 Sep 2022 19:03:32.4437
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: bebe97c3-6438-442e-ade3-ff17aa50e733
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: 6KoIi4ub2/0hq/wB1ouesYHSZIdfxCSL/PlPQc6XYxajIhsxVzAgzkqVM2r/XJEqfRStOjVzJw9M3t9m2dFJ8w==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: PAWPR03MB9246
X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
        DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE,
        RCVD_IN_MSPIKE_H2,SPF_HELO_PASS,SPF_PASS autolearn=ham
        autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
        lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This series converts the DPAA driver to phylink.

I have tried to maintain backwards compatibility with existing device
trees whereever possible. However, one area where I was unable to
achieve this was with QSGMII. Please refer to patch 2 for details.

All mac drivers have now been converted. I would greatly appreciate if
anyone has T-series or P-series boards they can test/debug this series
on. I only have an LS1046ARDB. Everything but QSGMII should work without
breakage; QSGMII needs patches 7 and 8. For this reason, the last 4
patches in this series should be applied together (and should not go
through separate trees).

This series depends on [1] and [2].

[1] https://lore.kernel.org/netdev/20220725153730.2604096-1-sean.anderson@seco.com/
[2] https://lore.kernel.org/netdev/20220725151039.2581576-1-sean.anderson@seco.com/

Changes in v5:
- Add Lynx PCS binding

Changes in v4:
- Use pcs-handle-names instead of pcs-names, as discussed
- Don't fail if phy support was not compiled in
- Split off rate adaptation series
- Split off DPAA "preparation" series
- Split off Lynx 10G support
- t208x: Mark MAC1 and MAC2 as 10G
- Add XFI PCS for t208x MAC1/MAC2

Changes in v3:
- Expand pcs-handle to an array
- Add vendor prefix 'fsl,' to rgmii and mii properties.
- Set maxItems for pcs-names
- Remove phy-* properties from example because dt-schema complains and I
  can't be bothered to figure out how to make it work.
- Add pcs-handle as a preferred version of pcsphy-handle
- Deprecate pcsphy-handle
- Remove mii/rmii properties
- Put the PCS mdiodev only after we are done with it (since the PCS
  does not perform a get itself).
- Remove _return label from memac_initialization in favor of returning
  directly
- Fix grabbing the default PCS not checking for -ENODATA from
  of_property_match_string
- Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config
- Remove rmii/mii properties
- Replace 1000Base... with 1000BASE... to match IEEE capitalization
- Add compatibles for QSGMII PCSs
- Split arm and powerpcs dts updates

Changes in v2:
- Better document how we select which PCS to use in the default case
- Move PCS_LYNX dependency to fman Kconfig
- Remove unused variable slow_10g_if
- Restrict valid link modes based on the phy interface. This is easier
  to set up, and mostly captures what I intended to do the first time.
  We now have a custom validate which restricts half-duplex for some SoCs
  for RGMII, but generally just uses the default phylink validate.
- Configure the SerDes in enable/disable
- Properly implement all ethtool ops and ioctls. These were mostly
  stubbed out just enough to compile last time.
- Convert 10GEC and dTSEC as well
- Fix capitalization of mEMAC in commit messages
- Add nodes for QSGMII PCSs
- Add nodes for QSGMII PCSs

Sean Anderson (9):
  dt-bindings: net: Expand pcs-handle to an array
  dt-bindings: net: Add Lynx PCS binding
  dt-bindings: net: fman: Add additional interface properties
  net: fman: memac: Add serdes support
  net: fman: memac: Use lynx pcs driver
  net: dpaa: Convert to phylink
  powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
  powerpc: dts: qoriq: Add nodes for QSGMII PCSs
  arm64: dts: layerscape: Add nodes for QSGMII PCSs

 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |   1 +
 .../bindings/net/ethernet-controller.yaml     |  10 +-
 .../bindings/net/fsl,fman-dtsec.yaml          |  53 +-
 .../bindings/net/fsl,qoriq-mc-dpmac.yaml      |   2 +-
 .../devicetree/bindings/net/fsl-fman.txt      |   5 +-
 .../bindings/net/pcs/fsl,lynx-pcs.yaml        |  40 +
 .../boot/dts/freescale/fsl-ls1043-post.dtsi   |  24 +
 .../boot/dts/freescale/fsl-ls1046-post.dtsi   |  25 +
 .../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi  |   3 +-
 .../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi     |  10 +-
 .../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi  |  10 +-
 .../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi     |  10 +-
 .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     |  45 ++
 .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     |  45 ++
 .../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi      |   3 +-
 .../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi      |   3 +-
 .../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi     |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi     |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi      |   3 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi      |  10 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi      |   3 +-
 .../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi      |  10 +-
 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |   4 +-
 drivers/net/ethernet/freescale/dpaa/Kconfig   |   4 +-
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    |  89 +--
 .../ethernet/freescale/dpaa/dpaa_ethtool.c    |  90 +--
 drivers/net/ethernet/freescale/fman/Kconfig   |   4 +-
 .../net/ethernet/freescale/fman/fman_dtsec.c  | 459 +++++------
 .../net/ethernet/freescale/fman/fman_mac.h    |  10 -
 .../net/ethernet/freescale/fman/fman_memac.c  | 746 +++++++++---------
 .../net/ethernet/freescale/fman/fman_tgec.c   | 131 ++-
 drivers/net/ethernet/freescale/fman/mac.c     | 168 +---
 drivers/net/ethernet/freescale/fman/mac.h     |  23 +-
 39 files changed, 1073 insertions(+), 1050 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi

-- 
2.35.1.1320.gc452695387.dirty