Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <647d12dd-9bc6-ebe3-7a72-9b9c0d4610dd@gmail.com>
Date:   Tue, 27 Sep 2022 16:01:05 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.2.1
Subject: Re: [PATCH v2 01/33] arm64: dts: qcom: ipq6018-cp01-c1: correct
 blspi1 pins
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>,
        Shawn Guo <shawn.guo@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        krishna Lanka <quic_vamslank@quicinc.com>,
        Sivaprakash Murugesan <sivaprak@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20220926074415.53100-1-krzysztof.kozlowski@linaro.org>
 <20220926074415.53100-2-krzysztof.kozlowski@linaro.org>
From:   Robert Marko <robimarko@gmail.com>
In-Reply-To: <20220926074415.53100-2-krzysztof.kozlowski@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 26. 09. 2022. 09:43, Krzysztof Kozlowski wrote:
> When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
> ("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
> the device node lacked respective pin configuration assignment.   It
> used also blsp0_spi function but that was probably the same mistake as
> naming it SPI0.

Hi,

Sorry for making it confusing, but "blsp0_spi" is the correct function.
Pinctrl driver and datasheets call functions blsp0-blps5, but usually in DT
we call the nodes blsp1-blsp6.

It would probably be better for me to rename the nodes to blsp0-5 instead.

Regards,
Robert

>
> Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> index 1ba2eca33c7b..afc2dc79767d 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> @@ -37,6 +37,8 @@ &blsp1_i2c3 {
>   
>   &blsp1_spi1 {
>   	cs-select = <0>;
> +	pinctrl-0 = <&spi_0_pins>;
> +	pinctrl-names = "default";
>   	status = "okay";
>   
>   	flash@0 {
> @@ -57,7 +59,7 @@ i2c_1_pins: i2c-1-pins {
>   
>   	spi_0_pins: spi-0-pins {
>   		pins = "gpio38", "gpio39", "gpio40", "gpio41";
> -		function = "blsp0_spi";
> +		function = "blsp1_spi";
>   		drive-strength = <8>;
>   		bias-pull-down;
>   	};