Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Marcel Ziswiler <marcel@ziswiler.com>
To:     linux-arm-kernel@lists.infradead.org
Cc:     Marcel Ziswiler <marcel.ziswiler@toradex.com>,
        Alistair Francis <alistair@alistair23.me>,
        Arnd Bergmann <arnd@arndb.de>,
        Fabio Estevam <festevam@gmail.com>,
        Johann Neuhauser <jneuhauser@dh-electronics.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Max Krummenacher <max.krummenacher@toradex.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Rob Herring <robh+dt@kernel.org>,
        Russell King <linux@armlinux.org.uk>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.
Date:   Wed, 28 Sep 2022 09:33:31 +0200
Message-Id: <20220928073336.63881-1-marcel@ziswiler.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


This series is an assortment of USB dual-role specific commits as
follows:

Introduce USBC_DET GPIO based USB dual-role aka device/host switching.

Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.

Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).

Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.

Changes in v2:
- Dropped fixes tag as this change is rather cosmetic.
- Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.

Marcel Ziswiler (4):
  arm: dts: colibri-imx6: move vbus-supply to module level device tree
  arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
  arm: dts: imx7-colibri: remove spurious debounce property
  ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support

Philippe Schenker (1):
  arm: dts: colibri-imx6: usb dual-role switching

 arch/arm/boot/dts/imx6dl-colibri-aster.dts   |  1 -
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts |  1 -
 arch/arm/boot/dts/imx6dl-colibri-iris.dts    |  1 -
 arch/arm/boot/dts/imx6qdl-colibri.dtsi       | 22 ++++++++++++++++----
 arch/arm/boot/dts/imx7-colibri.dtsi          |  1 -
 arch/arm/configs/imx_v6_v7_defconfig         |  1 +
 6 files changed, 19 insertions(+), 8 deletions(-)

-- 
2.36.1