Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rob Herring <robh@kernel.org>
To:     Fenglin Wu <quic_fenglinw@quicinc.com>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        quic_subbaram@quicinc.com, Pavel Machek <pavel@ucw.cz>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, linux-leds@vger.kernel.org,
        quic_collinsd@quicinc.com, linux-kernel@vger.kernel.org
In-Reply-To: <20220928024239.3843909-3-quic_fenglinw@quicinc.com>
References: <20220928024239.3843909-1-quic_fenglinw@quicinc.com> <20220928024239.3843909-3-quic_fenglinw@quicinc.com>
Subject: Re: [PATCH v1 2/2] dt-bindings: add bindings for QCOM flash LED
Date:   Wed, 28 Sep 2022 07:38:41 -0500
Message-Id: <1664368721.029242.4136673.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Wed, 28 Sep 2022 10:42:39 +0800, Fenglin Wu wrote:
> Add binding document for flash LED module inside Qualcomm Technologies,
> Inc. PMICs.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  .../bindings/leds/leds-qcom-flash.yaml        | 108 ++++++++++++++++++
>  1 file changed, 108 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-flash.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:21.17-32: Warning (reg_format): /example-0/flash-led@ee00:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:23.23-31.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:33.23-41.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.