Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 30 Sep 2022 14:55:05 -0500
From:   Rob Herring <robh@kernel.org>
To:     Johan Jonker <jbx6244@gmail.com>
Cc:     heiko@sntech.de, thierry.reding@gmail.com,
        u.kleine-koenig@pengutronix.de, krzysztof.kozlowski+dt@linaro.org,
        sebastian.reichel@collabora.com, wxt@rock-chips.com,
        kever.yang@rock-chips.com, linux-pwm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v1 2/2] ARM: dts: rk3288: add the interrupts property
 for PWM
Message-ID: <20220930195505.GA774897-robh@kernel.org>
References: <6eba6c10-9c96-b40f-937a-e02d43b04cd7@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <6eba6c10-9c96-b40f-937a-e02d43b04cd7@gmail.com>
Precedence: bulk

On Thu, Sep 29, 2022 at 04:04:06PM +0200, Johan Jonker wrote:
> The Rockchip rk3288 SoC has 4-built-in PWM channels.
> 
> Configurable to operate in capture mode.
> Measures the high/low polarity effective cycles of this input waveform
> Generates a single interrupt at the transition of input waveform polarity
> 
> Configurable to operate in continuous mode or one-shot mode.
> One-shot operation will produce N + 1 periods of the waveform,
> where N is the repeat counter value, and generates a single interrupt at
> the end of operation.
> Continuous mode generates the waveform continuously and
> do not generates any interrupts.
> 
> Add interrupts property to rk3288 PWM nodes.
> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> 
> ---

Please thread your series properly. That's replies to the cover letter 
or patch 1 if there isn't a cover letter. git-send-email does this by 
default.

Rob