Received: by 2002:a05:6359:c8b:b0:c7:702f:21d4 with SMTP id go11csp475917rwb; Sat, 1 Oct 2022 03:06:39 -0700 (PDT) X-Google-Smtp-Source: AMsMyM6v6HYP63PoyNkafD9y18ADPQ2CS1rVHs236ncBx0mUcZEf8yjxFRp66bvhn7k6yC9T2MRM X-Received: by 2002:a63:187:0:b0:43b:cf3c:c64d with SMTP id 129-20020a630187000000b0043bcf3cc64dmr11088237pgb.359.1664618798744; Sat, 01 Oct 2022 03:06:38 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1664618798; cv=none; d=google.com; s=arc-20160816; b=VtSiGi1YeRzUa0AjEwt6yZuG9eMSFc7t78COJ8CcpkvJ1MMs+3cJXYDWd3qrpVoCF7 QWmrYiIBXXwCaWMnbN64mQoPVY2oaw4vae1uLczPFJXy5xvsvhxZFjs4C+ZLYmxhI+XW RDkzU6amNfWgv8oK8KABIT5u2J8EL0GRrMLV9hWa42e7iUg9kUhj2fwKi3ze85bxRQuu OQ8aOagb3wYer2p9PzFIfQ+sf60kQwGqAReC+N9/wHsNGqf+W/QmSeuZwfvF372585d0 uP1T2xCpZRDLLwjCcgHYwCKCOAtrPQpdLjn7he31oJdzy1PQDu9houTuxaACPxQ+yLpQ ygOA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:in-reply-to:from :references:cc:to:content-language:subject:user-agent:mime-version :date:message-id:dkim-signature; bh=ALTKi4uCfPu90E8f9xwYaylx6ltvk2Sqp6lOA1ez2t0=; b=mgBecSC84eOw94CZCA73uBpaQV9zeRRG5zHnYOshu8eaa9H0lcMGcD4Qtz2kwbltz0 KIzRbF3inrSBVtONha1mUGXFs0fWlJ6hsf3UFMmwGNCJb0AmC0eucru0yPnl2NzpfJtj JBgKsn8x0XqwVF98gTWhMylMu7mk+CtIWdIk/mBsyAHkSR2BJx5bNaDCYEbunB+C2Nm+ ReErqjFSIwCsd3acepoTK18ssfZuoaAmbBV1fooZ0Yuq7AyANxkRfJIdL4xOU/u8WcrL 8ueqim8cgqAZCKd+BgL7kolBrqf03BzBrP6NdwmUyqAMffZbPBUilCnAvAQYx8zwEM2T FPaA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yW2ROdsG; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id n13-20020a170902e54d00b00176b26d519dsi6155066plf.350.2022.10.01.03.06.26; Sat, 01 Oct 2022 03:06:38 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yW2ROdsG; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229659AbiJAJWq (ORCPT + 99 others); Sat, 1 Oct 2022 05:22:46 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51304 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229650AbiJAJWm (ORCPT ); Sat, 1 Oct 2022 05:22:42 -0400 Received: from mail-lj1-x231.google.com (mail-lj1-x231.google.com [IPv6:2a00:1450:4864:20::231]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B697B16DDE5 for ; Sat, 1 Oct 2022 02:22:38 -0700 (PDT) Received: by mail-lj1-x231.google.com with SMTP id a10so7137716ljq.0 for ; Sat, 01 Oct 2022 02:22:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:in-reply-to:from:references:cc:to :content-language:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date; bh=ALTKi4uCfPu90E8f9xwYaylx6ltvk2Sqp6lOA1ez2t0=; b=yW2ROdsGfjO/aPznTtnFFEcNijMAks8bh/A1vmfoCK534cCI0PJJD//tLxv0xjn6lQ gTTwELz6A+18evQ1Xi/Od56cbB1D/lAxOSP7J73WpNWqShWretwDiJBp3xE3hF5Vrpfg Ln9HCb5kocl7pfdqQaCAupe5H62SQjG5vqBUbjJG6kMUsCFl4DWT44hQSalOwP739PLo NDg/ZQgQMmOie/X2IF7395/dPszkLBV5m09YwhvzOupuCkhlanXKaWLZ0XqCtiglhQEw obUWxqzUvo5y0q9cFzg+SLq7LXOHU1Hkv4Kz5QpsId7TbHny5HCLZQhLL6Hk8tI+7l83 31Yw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:in-reply-to:from:references:cc:to :content-language:subject:user-agent:mime-version:date:message-id :x-gm-message-state:from:to:cc:subject:date; bh=ALTKi4uCfPu90E8f9xwYaylx6ltvk2Sqp6lOA1ez2t0=; b=oYXbPsX9AsvqA//lPEsiJZRbMoMxEYgjO3gw7zXCLlEDG5TcCyWUm7m7B8BG8nmcUg EH4BPzd2XKdCk8LuV/Eyv26xTiN0i1YHkuhAtxrULQHVkSGPOdA8eTcVJGAFRdT+S8Fm 2dp/iJGDIJNzXkhdrsU4fdi4nCPs3dYcekgIHOYYnyx7z/7pSILvGFznAiOS3ZxcIY9M B1q6pzUQ2pVwk2HMbrhopSWbGW1FoZZg8fcJn14z/ugveoQ3der+/UxOL0WBertGsO0c Xg1OjH+kcFJJ3q/RpIyIsL5owfWvEqD69kPYd6D4zPPXYXFL+99z6MtD6Oo+UwmoZk7N r6Gw== X-Gm-Message-State: ACrzQf0Wp6lELXBFh/Ah3s0jn8k6Y8dUEs0PUYg1chuZ09CbWV+SFDPi 7DaTzFt3oWn1HSrpgIFnRpCo/w== X-Received: by 2002:a2e:9114:0:b0:26b:e3a2:3f89 with SMTP id m20-20020a2e9114000000b0026be3a23f89mr4062058ljg.132.1664616156944; Sat, 01 Oct 2022 02:22:36 -0700 (PDT) Received: from [192.168.0.21] (78-11-189-27.static.ip.netia.com.pl. [78.11.189.27]) by smtp.gmail.com with ESMTPSA id p20-20020a2eb994000000b0026c297a9e11sm382898ljp.133.2022.10.01.02.22.36 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sat, 01 Oct 2022 02:22:36 -0700 (PDT) Message-ID: Date: Sat, 1 Oct 2022 11:22:35 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.3.0 Subject: Re: [PATCH 2/2] pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver Content-Language: en-US To: Melody Olvera , Andy Gross , Bjorn Andersson , Linus Walleij , Rob Herring , Krzysztof Kozlowski Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org References: <20221001030546.28220-1-quic_molvera@quicinc.com> <20221001030546.28220-3-quic_molvera@quicinc.com> From: Krzysztof Kozlowski In-Reply-To: <20221001030546.28220-3-quic_molvera@quicinc.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=-4.8 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,NICE_REPLY_A,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 01/10/2022 05:05, Melody Olvera wrote: > Add pin control driver for the TLMM block found in the QDU1000 > and QRU1000 SoC. > > Signed-off-by: Melody Olvera > --- > .../pinctrl/qcom,qdru1000-pinctrl.yaml | 177 +- > drivers/pinctrl/qcom/Kconfig | 10 + > drivers/pinctrl/qcom/Makefile | 1 + > drivers/pinctrl/qcom/pinctrl-qdru1000.c | 59 + > drivers/pinctrl/qcom/pinctrl-qdru1000.h | 1896 +++++++++++++++++ > 5 files changed, 2050 insertions(+), 93 deletions(-) > create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.c > create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.h > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > index e8d938303231..42176247862c 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml Nope, drivers cannot be mixed with bindings in one patch. > @@ -10,7 +10,11 @@ maintainers: > - Melody Olvera > > description: | > - This binding describes the Top Level Mode Multiplexer block. > + This binding describes the Top Level Mode Multiplexer block (TLMM) found > + in the QDU1000 and QRU1000 platforms. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > > properties: > compatible: > @@ -19,105 +23,92 @@ properties: > - const: qcom,qru1000-tlmm > > reg: > - items: > - - description: Base address of TLMM register space > - - description: Size of TLMM register space > - > - interrupts: > - minItems: 0 > maxItems: 1 > - items: > - - const: TLMM summary IRQ > - > + interrupts: true > interrupt-controller: true > - > - '#interrupt-cells': > - const: 2 > - > + '#interrupt-cells': true > gpio-controller: true > + '#gpio-cells': true > + wakeup-parent: true > > - '#gpio-cells': > - const: 2 > - > - wakeup-parent: > - maxItems: 1 > - description: > - Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for > - a general description of GPIO and interrupt bindings. > - > - Please refer to pinctrl-bindings.txt in this directory for details of the > - common pinctrl bindings used by client devices, including the meaning of the > - phrase "pin configuration node". > - > - The pin configuration nodes act as a container for an arbitrary number of > - subnodes. Each of these subnodes represents some desired configuration for a > - pin, a group, or a list of pins or groups. This configuration can include the > - mux function to select on those pin(s)/group(s), and various pin configuration > - parameters, such as pull-up, drive strength, etc. > +required: > + - compatible > + - reg > > +additionalProperties: false > > # PIN CONFIGURATION NODES > -patternPropetries: > - '^.*$': > - if: > - type: object > - then: > - properties: > - pins: > - description: > - List of gpio pins affected by the properties specified in > - this subnode. > - items: > - oneOf: > - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])" > - - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] > - minItems: 1 > - maxItems: 36 > - function: > - description: > - Specify the alternative function to be configured for the > - specified pins. Functions are only valid for gpio pins. > - enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > - atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk, > - cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0, > - cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, > - gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, > - mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, > - mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, > - mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9, > - nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1, > - phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, > - phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, > - phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, > - phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, > - phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist, > - pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, > - qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, > - qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, > - qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable, > - qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, > - qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, > - qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, > - qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, > - sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, > - tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, > - uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, > - vfr_1, vsense_trigger] > - drive-strength: > - enum: [2, 4, 6, 8, 10, 12, 14, 16] > - default: 2 > - description: > - Selects the drive strength for the specified pins, in mA. > - bias-pull-down: true > - bias-pull-up: true > - bias-disable: true > - output-high: true > - output-low: true > - required: > - - pins > - - function > - additionalProperties: false > +patternProperties: > + '-state$': > + oneOf: > + - $ref: "#/$defs/qcom-qdru1000-tlmm-state" > + - patternProperties: > + ".*": > + $ref: "#/$defs/qcom-qdru1000-tlmm-state" Review your patches before sending... > + > +$defs: > + qcom-qdru1000-tlmm-state: > + type: object > + description: > + Pinctrl nodes' client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in > + this subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])" > + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] > + minItems: 1 > + maxItems: 36 > + function: > + description: > + Specify the alternative function to be configured for the > + specified pins. Functions are only valid for gpio pins. > + enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk, > + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0, > + cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, > + gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, > + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, > + mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, > + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9, > + nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1, > + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, > + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, > + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, > + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, > + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist, > + pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, > + qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, > + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, > + qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable, > + qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, > + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, > + qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, > + qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, > + sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, > + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, > + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, > + vfr_1, vsense_trigger] > + > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > > examples: > - | > diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig > index f415c13caae0..c8a7d6e44a81 100644 > --- a/drivers/pinctrl/qcom/Kconfig > +++ b/drivers/pinctrl/qcom/Kconfig > @@ -390,6 +390,16 @@ config PINCTRL_SM8450 > Qualcomm Technologies Inc TLMM block found on the Qualcomm > Technologies Inc SM8450 platform. > > +config PINCTRL_QDRU1000 Order alphabetically. > + tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver" > + depends on GPIOLIB && OF > + depends on PINCTRL_MSM > + help > + This is the pinctrl, pinmux, pinconf, and gpiolib driver for the > + Qualcomm Technologies Inc TLMM block found on the Qualcomm > + Technologies Inc QDU1000 and QRU1000 platforms. > + > + No need for multiple line breaks. > config PINCTRL_LPASS_LPI > tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver" > select PINMUX > diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile > index fbd64853a24d..431a845b4e2d 100644 > --- a/drivers/pinctrl/qcom/Makefile > +++ b/drivers/pinctrl/qcom/Makefile > @@ -45,4 +45,5 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o > obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o > obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o > obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o > +obj-$(CONFIG_PINCTRL_QDRU1000) += pinctrl-qdru1000.o Wrong order. > obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o > diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c > new file mode 100644 > index 000000000000..8b931ff80bb4 > --- /dev/null > +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c > @@ -0,0 +1,59 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-msm.h" > +#include "pinctrl-qdru1000.h" > + > +static const struct msm_pinctrl_soc_data qdru1000_tlmm = { > + .pins = qdru1000_pins, > + .npins = ARRAY_SIZE(qdru1000_pins), > + .functions = qdru1000_functions, > + .nfunctions = ARRAY_SIZE(qdru1000_functions), > + .groups = qdru1000_groups, > + .ngroups = ARRAY_SIZE(qdru1000_groups), > + .ngpios = 151, > +}; > + > +static int qdru1000_tlmm_probe(struct platform_device *pdev) > +{ > + return msm_pinctrl_probe(pdev, &qdru1000_tlmm); > +} > + > +static const struct of_device_id qdru1000_tlmm_of_match[] = { > + { .compatible = "qcom,qdu1000-tlmm", }, > + { .compatible = "qcom,qru1000-tlmm", }, > + { }, > +}; > + > +static struct platform_driver qdru1000_tlmm_driver = { > + .driver = { > + .name = "qdru1000-tlmm", > + .of_match_table = qdru1000_tlmm_of_match, > + }, > + .probe = qdru1000_tlmm_probe, > + .remove = msm_pinctrl_remove, > +}; > + > +static int __init qdru1000_tlmm_init(void) > +{ > + return platform_driver_register(&qdru1000_tlmm_driver); > +} > +arch_initcall(qdru1000_tlmm_init); > + > +static void __exit qdru1000_tlmm_exit(void) > +{ > + platform_driver_unregister(&qdru1000_tlmm_driver); > +} > +module_exit(qdru1000_tlmm_exit); > + > +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match); > diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h > new file mode 100644 > index 000000000000..3c1f703ae53b > --- /dev/null > +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.h > @@ -0,0 +1,1896 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#define FUNCTION(fname) \ > + [msm_mux_##fname] = { \ > + .name = #fname, \ > + .groups = fname##_groups, \ > + .ngroups = ARRAY_SIZE(fname##_groups), \ > + } > + > +#define REG_BASE 0x100000 > +#define REG_SIZE 0x1000 > +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ > + { \ > + .name = "gpio" #id, \ > + .pins = gpio##id##_pins, \ > + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ > + .funcs = (int[]){ \ > + msm_mux_gpio, /* gpio mode */ \ > + msm_mux_##f1, \ > + msm_mux_##f2, \ > + msm_mux_##f3, \ > + msm_mux_##f4, \ > + msm_mux_##f5, \ > + msm_mux_##f6, \ > + msm_mux_##f7, \ > + msm_mux_##f8, \ > + msm_mux_##f9 \ > + }, \ > + .nfuncs = 10, \ > + .ctl_reg = REG_BASE + REG_SIZE * id, \ > + .io_reg = REG_BASE + 0x4 + REG_SIZE * id, \ > + .intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id, \ > + .intr_status_reg = REG_BASE + 0xc + REG_SIZE * id, \ > + .intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id, \ > + .mux_bit = 2, \ > + .pull_bit = 0, \ > + .drv_bit = 6, \ > + .oe_bit = 9, \ > + .in_bit = 0, \ > + .out_bit = 1, \ > + .intr_enable_bit = 0, \ > + .intr_status_bit = 0, \ > + .intr_target_bit = 5, \ > + .intr_target_kpss_val = 3, \ > + .intr_raw_status_bit = 4, \ > + .intr_polarity_bit = 1, \ > + .intr_detection_bit = 2, \ > + .intr_detection_width = 2, \ > + } > + > +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \ > + { \ > + .name = #pg_name, \ > + .pins = pg_name##_pins, \ > + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ > + .ctl_reg = REG_BASE + ctl, \ > + .io_reg = 0, \ > + .intr_cfg_reg = 0, \ > + .intr_status_reg = 0, \ > + .intr_target_reg = 0, \ > + .mux_bit = -1, \ > + .pull_bit = pull, \ > + .drv_bit = drv, \ > + .oe_bit = -1, \ > + .in_bit = -1, \ > + .out_bit = -1, \ > + .intr_enable_bit = -1, \ > + .intr_status_bit = -1, \ > + .intr_target_bit = -1, \ > + .intr_raw_status_bit = -1, \ > + .intr_polarity_bit = -1, \ > + .intr_detection_bit = -1, \ > + .intr_detection_width = -1, \ > + } > + > +#define UFS_RESET(pg_name, offset) \ > + { \ > + .name = #pg_name, \ > + .pins = pg_name##_pins, \ > + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ > + .ctl_reg = offset, \ > + .io_reg = offset + 0x4, \ > + .intr_cfg_reg = 0, \ > + .intr_status_reg = 0, \ > + .intr_target_reg = 0, \ > + .mux_bit = -1, \ > + .pull_bit = 3, \ > + .drv_bit = 0, \ > + .oe_bit = -1, \ > + .in_bit = -1, \ > + .out_bit = 0, \ > + .intr_enable_bit = -1, \ > + .intr_status_bit = -1, \ > + .intr_target_bit = -1, \ > + .intr_raw_status_bit = -1, \ > + .intr_polarity_bit = -1, \ > + .intr_detection_bit = -1, \ > + .intr_detection_width = -1, \ > + } > + > +#define QUP_I3C(qup_mode, qup_offset) \ > + { \ > + .mode = qup_mode, \ > + .offset = qup_offset, \ > + } > + > +static const struct pinctrl_pin_desc qdru1000_pins[] = { > + PINCTRL_PIN(0, "GPIO_0"), > + PINCTRL_PIN(1, "GPIO_1"), > + PINCTRL_PIN(2, "GPIO_2"), > + PINCTRL_PIN(3, "GPIO_3"), Nope. Header is not a place for this stuff. Best regards, Krzysztof