Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Daniel Lezcano <daniel.lezcano@linaro.org>
To:     daniel.lezcano@linaro.org, rafael@kernel.org
Cc:     linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        rui.zhang@intel.com, Raju Rangoju <rajur@chelsio.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Peter Kaestle <peter@piie.net>,
        Hans de Goede <hdegoede@redhat.com>,
        Mark Gross <markgross@kernel.org>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Amit Kucheria <amitk@kernel.org>,
        Nicolas Saenz Julienne <nsaenz@kernel.org>,
        Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        Support Opensource <support.opensource@diasemi.com>,
        Lukasz Luba <lukasz.luba@arm.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Thara Gopinath <thara.gopinath@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        =?UTF-8?q?Niklas=20S=C3=B6derlund?= <niklas.soderlund@ragnatech.se>,
        Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Thierry Reding <thierry.reding@gmail.com>,
        Jonathan Hunter <jonathanh@nvidia.com>,
        Eduardo Valentin <edubezval@gmail.com>,
        Keerthy <j-keerthy@ti.com>,
        Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
        Masami Hiramatsu <mhiramat@kernel.org>,
        Antoine Tenart <atenart@kernel.org>,
        Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
        Dmitry Osipenko <digetx@gmail.com>, netdev@vger.kernel.org,
        platform-driver-x86@vger.kernel.org,
        linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org,
        linux-arm-msm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
        linux-samsung-soc@vger.kernel.org, linux-tegra@vger.kernel.org,
        linux-omap@vger.kernel.org,
        Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Subject: [PATCH v8 24/29] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
Date:   Mon,  3 Oct 2022 11:25:57 +0200
Message-Id: <20221003092602.1323944-25-daniel.lezcano@linaro.org>
In-Reply-To: <20221003092602.1323944-1-daniel.lezcano@linaro.org>
References: <20221003092602.1323944-1-daniel.lezcano@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
---
 drivers/thermal/da9062-thermal.c | 52 +++++---------------------------
 1 file changed, 8 insertions(+), 44 deletions(-)

diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 180edec34e07..1e163e90d6b6 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
-					int trip,
-					enum thermal_trip_type *type)
-{
-	struct da9062_thermal *thermal = z->devdata;
-
-	switch (trip) {
-	case 0:
-		*type = THERMAL_TRIP_HOT;
-		break;
-	default:
-		dev_err(thermal->dev,
-			"Driver does not support more than 1 trip-wire\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
-					int trip,
-					int *temp)
-{
-	struct da9062_thermal *thermal = z->devdata;
-
-	switch (trip) {
-	case 0:
-		*temp = DA9062_MILLI_CELSIUS(125);
-		break;
-	default:
-		dev_err(thermal->dev,
-			"Driver does not support more than 1 trip-wire\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 				   int *temp)
 {
@@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 
 static struct thermal_zone_device_ops da9062_thermal_ops = {
 	.get_temp	= da9062_thermal_get_temp,
-	.get_trip_type	= da9062_thermal_get_trip_type,
-	.get_trip_temp	= da9062_thermal_get_trip_temp,
+};
+
+static struct thermal_trip trips[] = {
+	{ .temperature = DA9062_MILLI_CELSIUS(125), .type = THERMAL_TRIP_HOT },
 };
 
 static const struct da9062_thermal_config da9062_config = {
@@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
 	mutex_init(&thermal->lock);
 
-	thermal->zone = thermal_zone_device_register(thermal->config->name,
-					1, 0, thermal,
-					&da9062_thermal_ops, NULL, pp_tmp,
-					0);
+	thermal->zone = thermal_zone_device_register_with_trips(thermal->config->name,
+								trips, ARRAY_SIZE(trips), 0, thermal,
+								&da9062_thermal_ops, NULL, pp_tmp,
+								0);
 	if (IS_ERR(thermal->zone)) {
 		dev_err(&pdev->dev, "Cannot register thermal zone device\n");
 		ret = PTR_ERR(thermal->zone);
-- 
2.34.1