Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Prabhakar <prabhakar.csengg@gmail.com>
To:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Jacopo Mondi <jacopo@jmondi.org>,
        =?UTF-8?q?Niklas=20S=C3=B6derlund?= <niklas.soderlund@ragnatech.se>,
        Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc:     Geert Uytterhoeven <geert+renesas@glider.be>,
        linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
        Prabhakar <prabhakar.csengg@gmail.com>,
        Biju Das <biju.das.jz@bp.renesas.com>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v3 0/4] Add driver for CSI2 and CRU modules found on Renesas RZ/G2L SoC
Date:   Wed,  5 Oct 2022 00:43:39 +0100
Message-Id: <20221004234343.54777-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi All,

This patch series aims to add driver support to CRU module found
on Renesas RZ/G2L SoC.

The Camera Data Receiving Unit (CRU) consists of a MIPI CSI-2
block and an Image Processing block. The Image Processing block
can receive video data received from the external Digital Parallel
Interface or MIPI CSI-2 block, and perform appropriate image
processing for each.

More details:
* https://renesas.info/wiki/File:CRU.png
* https://www.renesas.com/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en&r=1467981

Currently the driver has been tested using yavta and Gstreamer
on RZ/G2L SMARC EVK using the ov5645 sensor on CSI2 interface
only.

media pipeline:
---------------------------------------------
root@smarc-rzg2l:~# media-ctl -p
Media controller API version 6.0.0

Media device information
------------------------
driver          rzg2l_cru
model           renesas,rzg2l-cru
serial          
bus info        platform:10830000.video
hw revision     0x0
driver version  6.0.0

Device topology
- entity 1: csi-10830400.csi2 (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
        pad0: Sink
                [fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
                <- "ov5645 0-003c":0 [ENABLED,IMMUTABLE]
        pad1: Source
                [fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
                -> "cru-ip-10830000.video":0 []

- entity 4: ov5645 0-003c (1 pad, 1 link)
            type V4L2 subdev subtype Sensor flags 0
            device node name /dev/v4l-subdev1
        pad0: Source
                [fmt:UYVY8_1X16/1920x1080 field:none colorspace:srgb
                 crop:(0,0)/1920x1080]
                -> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]

- entity 8: cru-ip-10830000.video (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev2
        pad0: Sink
                [fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
                <- "csi-10830400.csi2":1 []
        pad1: Source
                [fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
                -> "CRU output":0 []

- entity 17: CRU output (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video0
        pad0: Sink
                <- "cru-ip-10830000.video":1 []

-----------------------------------------
v4l2-compliance results:-

root@smarc-rzg2l:~# v4l2-compliance -s
v4l2-compliance 1.22.1-4864, 64 bits, 64-bit time_t
v4l2-compliance SHA: 47c8c377cf29 2021-10-23 15:12:35

Compliance test for rzg2l_cru device /dev/video0:

Driver Info:
        Driver name      : rzg2l_cru
        Card type        : RZG2L_CRU
        Bus info         : platform:10830000.video
        Driver version   : 6.0.0
        Capabili[  188.618086] rzg2l-cru 10830000.video: =================  START STATUS  =================
ties     : 0xa4200001
                Video Capture
[  188.629540] rzg2l-cru 10830000.video: ==================  END STATUS  ==================
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps      : 0x24200001
                Video Capture
                Streaming
                Extended Pix Format
Media Driver Info:
        Driver name      : rzg2l_cru
        Model            : renesas,rzg2l-cru
        Serial           : 
        Bus info         : platform:10830000.video
        Media version    : 6.0.0
        Hardware revision: 0x00000000 (0)
        Driver version   : 6.0.0
Interface Info:
        ID               : 0x03000013
        Type             : V4L Video
Entity Info:
        ID               : 0x00000011 (17)
        Name             : CRU output
        Function         : V4L2 I/O
        Pad 0x01000012   : 0: Sink
          Link 0x02000017: from remote pad 0x100000a of entity 'cru-ip-10830000.video' (Video Pixel Formatter): Data, Enabled

Required ioctls:
        test MC information (see 'Media Driver Info' above): OK
        test VIDIOC_QUERYCAP: OK
        test invalid ioctls: OK

Allow for multiple opens:
        test second /dev/video0 open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK
        test for unlimited opens: OK

Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
        test VIDIOC_LOG_STATUS: OK

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
        test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
        test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls (Input 0):
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
        test VIDIOC_QUERYCTRL: OK (Not Supported)
        test VIDIOC_G/S_CTRL: OK (Not Supported)
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 0 Private Controls: 0

Format ioctls (Input 0):
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
        test VIDIOC_G/S_PARM: OK (Not Supported)
        test VIDIOC_G_FBUF: OK (Not Supported)
        test VIDIOC_G_FMT: OK
        test VIDIOC_TRY_FMT: OK
        test VIDIOC_S_FMT: OK
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
        test Cropping: OK (Not Supported)
        test Composing: OK (Not Supported)
        test Scaling: OK

Codec ioctls (Input 0):
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
        test VIDIOC_G_ENC_INDEX: OK (Not Supported)
        test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls (Input 0):
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
        test VIDIOC_EXPBUF: OK
        test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
        test read/write: OK (Not Supported)
        test blocking wait: OK
        test MMAP (no poll): OK                           
        test MMAP (select): OK                            
        test MMAP (epoll): OK                             
        test USERPTR (no poll): OK (Not Supported)
        test USERPTR (select): OK (Not Supported)
        test DMABUF: Cannot test, specify --expbuf-device

Total for rzg2l_cru device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
root@smarc-rzg2l:~#
--------------------------------------------


v2 -> v3:
* Updated clock names in DT binding doc
* Included presetn reset signal and added reset-names in CSI binding
* Renamed csi20 -> csi in DT binding doc
* Included RB tag from Krzysztof for patch#1
* Switched to runtime PM for both CSI and CRU drivers
* Implemented pre_streamon callback in CSI driver
* Got rid of rzg2l_csi2_cmn_rstb_deassert()/
  rzg2l_csi2_dphy_setting/rzg2l_csi2_mipi_link_setting() from CSI driver
* Switched to for-loop instead of if block for getting CSI timings
* Fixed rzg2l_csi2_set_format() as pointed by Laurent
* Copied all colorspace-related fields received from userspace (colorspace,
  xfer_func, ycbcr_enc and quantization) in rzg2l_csi2_set_format.
* Initialised pad in rzg2l_csi2_init_config() 
* Introduced RZG2L_CSI2_DEFAULT_WIDTH/HEIGHT/FMT macros
* Dropped RZG2L_CSI2_SOURCE_VC0-RZG2L_CSI2_SOURCE_VC3 macros
* Modeled CRU IP block as a subdev
* Dropped explicitly selecting VIDEO_RZG2L_CSI2 for VIDEO_RZG2L_CRU config
* Replaced v4l2_dev_to_cru macro with inline function notifier_to_cru()
* Dropped id parameter from rvin_mc_parse_of()
* Renamed rzg2l_cru_csi2_init() -> rzg2l_cru_media_init()
* Used dev_err_probe() in rzg2l_cru_probe()
* Replaced devm_reset_control_get() -> devm_reset_control_get_exclusive()
* Prefixed HW_BUFFER_MAX and HW_BUFFER_DEFAULT macros with RZG2L_CRU_
* Moved asserting presetn signal from rzg2l_cru_dma_register() to rzg2l_cru_start_streaming_vq()
* Dropped VB2_READ from VB2 io_modes
* Used dev_dbg() in rzg2l_cru_video_register() and rzg2l_cru_video_unregister()
* Got rid of rzg2l_cru_notify()
* Dropped V4L2_CAP_READWRITE from device caps
* Introduced rzg2l_cru_v4l2_init() for initialization.
* Got rid v4l2_pipeline_pm_get() and used PM in ov5645 sensor driver. Patch posted 
  https://patchwork.linuxtv.org/project/linux-media/patch/20220927201634.750141-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

v1 -> v2:
* Dropped media prefix from subject
* Renamed node name csi20 -> csi
* Used 4 spaces for indentation in example node
* Dropped reset-names and interrupt-names properties
* Dropped oneOf from compatible
* Included RB tags from Laurent
* Marked port0/1 as required for cru node
* Sorted Kconfig select
* Prefixed generic names for struct/variables with rzg2_csi2
* Dropped unnecessary checks for remote source
* Dropped exporting functions
* Moved lane validation to probe
* Split up rzg2l_csi2_dphy_setting() and rzg2l_csi2_mipi_link_setting()
* Used rzg2l_csi2_write() wherever possible
* Dropped stream_count/lock members from csi2 struct
* Used active subdev state instead of manually storing format in driver
* Implemented init_cfg/enum_frame_size/enum_mbus_code callbacks
* Dropped check for bus_type of remote source
* Switched to manually turning ON/OFF the clocks instead of pm_runtime so that
  the mipi/dhpy initialization happens as per the HW manual
* Hardcoded VC0 usage for now as streams API is under development

v1:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220801214718.16943-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

RFC v2:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220121010543.31385-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

RFC v1:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20211207012351.15754-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (4):
  media: dt-bindings: Document Renesas RZ/G2L CSI-2 block
  media: dt-bindings: Document Renesas RZ/G2L CRU block
  media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
  media: platform: Add Renesas RZ/G2L CRU driver

 .../bindings/media/renesas,rzg2l-cru.yaml     |  157 +++
 .../bindings/media/renesas,rzg2l-csi2.yaml    |  149 +++
 drivers/media/platform/renesas/Kconfig        |    1 +
 drivers/media/platform/renesas/Makefile       |    1 +
 .../media/platform/renesas/rzg2l-cru/Kconfig  |   33 +
 .../media/platform/renesas/rzg2l-cru/Makefile |    6 +
 .../platform/renesas/rzg2l-cru/rzg2l-core.c   |  372 ++++++
 .../platform/renesas/rzg2l-cru/rzg2l-cru.h    |  163 +++
 .../platform/renesas/rzg2l-cru/rzg2l-csi2.c   |  847 +++++++++++++
 .../platform/renesas/rzg2l-cru/rzg2l-ip.c     |  259 ++++
 .../platform/renesas/rzg2l-cru/rzg2l-video.c  | 1055 +++++++++++++++++
 11 files changed, 3043 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
 create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c

-- 
2.25.1