Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rob Herring <robh@kernel.org>
To:     Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
Cc:     robh+dt@kernel.org, lars@metafoo.de, linux-kernel@vger.kernel.org,
        rajat.khandelwal@intel.com, devicetree@vger.kernel.org,
        krzysztof.kozlowski+dt@linaro.org, ihkose@gmail.com,
        linux-iio@vger.kernel.org, jic23@kernel.org
In-Reply-To: <20221012074446.726409-1-rajat.khandelwal@linux.intel.com>
References: <20221012074446.726409-1-rajat.khandelwal@linux.intel.com>
Message-Id: <166549347474.2698211.13563129386484307071.robh@kernel.org>
Subject: Re: [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
Date:   Tue, 11 Oct 2022 08:10:04 -0500
Precedence: bulk

On Wed, 12 Oct 2022 13:14:46 +0530, Rajat Khandelwal wrote:
> The datasheet states that the slave address for the device is 0x20
> when the pins A0 and A1 are ground. The DT binding has been using
> 0x10 as the value and I think it should be 0x20 as per datasheet.
> 
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
> ---
> 
> v2:
> 1. Subject prefix added
> 2. DT bindings validated
> 
>  Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/dac/maxim,ds4424.example.dts:22.20-26.15: Warning (i2c_bus_reg): /example-0/i2c/dac@10: I2C bus unit address format error, expected "20"

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.