Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rob Herring <robh@kernel.org>
To:     Bryan Brattlof <bb@ti.com>
Cc:     Nishanth Menon <nm@ti.com>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Zhang Rui <rui.zhang@intel.com>,
        Amit Kucheria <amitk@kernel.org>,
        Linux Device Tree <devicetree@vger.kernel.org>,
        Tero Kristo <kristo@kernel.org>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Keerthy <j-keerthy@ti.com>,
        Linux Thermal <linux-pm@vger.kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        LKML <linux-kernel@vger.kernel.org>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>
In-Reply-To: <20221011231727.8090-7-bb@ti.com>
References: <20221011231727.8090-1-bb@ti.com> <20221011231727.8090-7-bb@ti.com>
Message-Id: <166558062789.1936784.4988511846855638539.robh@kernel.org>
Subject: Re: [PATCH 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
Date:   Wed, 12 Oct 2022 08:19:39 -0500
Precedence: bulk

On Tue, 11 Oct 2022 18:17:22 -0500, Bryan Brattlof wrote:
> Only some of TI's J721E SoCs will need a eFuse register range mapped to
> determine if they're affected by TI's i2128 erratum. All other SoC will
> not need this eFuse range to be mapped to function properly
> 
> Update the bindings for the k3_j72xx_bandgap thermal driver so other
> devices will only need to define two register ranges
> 
> Signed-off-by: Bryan Brattlof <bb@ti.com>
> ---
>  .../bindings/thermal/ti,j72xx-thermal.yaml    | 34 +++++++++++++------
>  1 file changed, 24 insertions(+), 10 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.example.dtb: thermal-sensor@42040000: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.