Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
Date:   Wed, 12 Oct 2022 20:33:27 +0200
From:   konrad.dybcio@somainline.org
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: qcom: msm8996-sony-xperia-tone: drop
 incorrect wlan pin input
In-Reply-To: <20221012151545.39061-1-krzysztof.kozlowski@linaro.org>
References: <20221012151545.39061-1-krzysztof.kozlowski@linaro.org>
User-Agent: Roundcube Webmail/1.4.6
Message-ID: <b7b67b4bc7d3cdd5eb27fb1ac68b84e9@somainline.org>
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 2022-10-12 17:15, Krzysztof Kozlowski wrote:
> Pin configuration has no "input-high" property, so drop it from node
> described as Wifi host wake up pin.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Not tested on hw, but it should not matter, as the property was simply 
ignored

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> index ca7c8d2e1d3d..93568fb4bc86 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> @@ -912,7 +912,6 @@ wl_host_wake: wl-host-wake {
>  		function = "gpio";
>  		drive-strength = <2>;
>  		bias-pull-down;
> -		input-high;
>  	};
> 
>  	wl_reg_on: wl-reg-on {