Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Apurva Nandan <a-nandan@ti.com>
To:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-gpio@vger.kernel.org>
CC:     Apurva Nandan <a-nandan@ti.com>, Hari Nagalla <hnagalla@ti.com>
Subject: [PATCH v2 0/4] Add initial support for J784S4 SoC
Date:   Fri, 14 Oct 2022 13:53:10 +0530
Message-ID: <20221014082314.118361-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.

Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
  4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
  deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
  and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
  DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
  support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
  device subsystems, Up to 20 MCANs, among other peripherals.

See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52

bootlog: https://pastebin.ubuntu.com/p/XzbP9mHkKF/plain/

Changelog:
- Disabled all the IPs that are not mandatory for booting up the SoC by
  default in the dtsi, and thus this gives a minimal SoC boot devicetree.
- Moved no-1-8-v property from the k3-j784s4-evm.dts file to
  k3-j784s4-main.dtsi file.
- Naming changes (hwlock, regulator) and commit description changes.
- Added device specific compatible for j721e system controller.
- Dropped bootargs completely.

Apurva Nandan (4):
  dt-bindings: arm: ti: Add bindings for J784s4 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
  arm64: dts: ti: Add initial support for J784S4 SoC
  arm64: dts: ti: Add support for J784S4 EVM board

 .../devicetree/bindings/arm/ti/k3.yaml        |    6 +
 arch/arm64/boot/dts/ti/Makefile               |    2 +
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      |  199 ++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi    | 1010 +++++++++++++++++
 .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     |  318 ++++++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi         |  287 +++++
 include/dt-bindings/pinctrl/k3.h              |    3 +
 7 files changed, 1825 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4.dtsi

-- 
2.17.1