Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <215c11d7-9bee-a97c-674c-06336f5c7dc9@foss.st.com>
Date:   Fri, 14 Oct 2022 16:01:15 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.2.2
Subject: Re: [PATCH 00/10] Add support for USB on STM32MP13
Content-Language: en-US
To:     <alexandre.torgue@foss.st.com>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>
CC:     <amelie.delaunay@foss.st.com>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>
References: <20221014092651.25202-1-fabrice.gasnier@foss.st.com>
From:   Fabrice Gasnier <fabrice.gasnier@foss.st.com>
In-Reply-To: <20221014092651.25202-1-fabrice.gasnier@foss.st.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 10/14/22 11:26, Fabrice Gasnier wrote:
> Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
> Enable all these interfaces on STM32MP135F-DK board.
> Enable the STM32G0 UCSI driver as module.
> Dependency on PWR and PMIC regulator is tempoarily managed by using
> fixed regulators (resp in the SoC dtsi and the board dts files).
> The USB support is functional when these regulators gets enabled at
> boot time before entering the kernel.

Hi,

Please discard this series. Generic node names recommendation has been
missed.
I'll send a V2.

Sorry for the noise.
Best Regards,
Fabrice

> 
> Amelie Delaunay (5):
>   ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
>   ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
>   ARM: dts: stm32: add USB OTG HS support on stm32mp131
>   ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
>   ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
> 
> Fabrice Gasnier (5):
>   ARM: dts: stm32: add PWR fixed regulators on stm32mp131
>   ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
>   ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
>   ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
>   ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
> 
>  arch/arm/boot/dts/stm32mp13-pinctrl.dtsi |  7 ++
>  arch/arm/boot/dts/stm32mp131.dtsi        | 81 ++++++++++++++++++++
>  arch/arm/boot/dts/stm32mp135f-dk.dts     | 95 ++++++++++++++++++++++++
>  arch/arm/configs/multi_v7_defconfig      |  2 +
>  4 files changed, 185 insertions(+)
>