Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>,
        Shawn Guo <shawn.guo@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        krishna Lanka <quic_vamslank@quicinc.com>,
        Sivaprakash Murugesan <sivaprak@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Rob Herring <robh@kernel.org>
Subject: [PATCH v5 12/34] dt-bindings: pinctrl: qcom,ipq6018: use common TLMM schema
Date:   Sun, 16 Oct 2022 13:00:13 -0400
Message-Id: <20221016170035.35014-13-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221016170035.35014-1-krzysztof.kozlowski@linaro.org>
References: <20221016170035.35014-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes since v4:
1. Drop drive-strength (included by common TLMM node).

Changes since v3:
1. Drop properties and required items which are already provided by
   common TLMM schema.
---
 .../pinctrl/qcom,ipq6018-pinctrl.yaml         | 45 +++----------------
 1 file changed, 7 insertions(+), 38 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 735a8786cb13..6c6b14d1efea 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -20,27 +20,12 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
 patternProperties:
   "-state$":
@@ -56,7 +41,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -103,40 +88,24 @@ $defs:
                 sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
                 uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
-- 
2.34.1