Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Giulio Benetti <giulio.benetti@benettiengineering.com>
To:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
        linux-mmc@vger.kernel.org
Cc:     Stephen Boyd <sboyd@kernel.org>, Haibo Chen <haibo.chen@nxp.com>,
        Adrian Hunter <adrian.hunter@intel.com>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Giulio Benetti <giulio.benetti@benettiengineering.com>
Subject: [PATCH 4/5] ARM: dts: imxrt1050: remove mmc max-frequency property
Date:   Tue, 18 Oct 2022 01:56:01 +0200
Message-Id: <20221017235602.86250-4-giulio.benetti@benettiengineering.com>
In-Reply-To: <20221017235602.86250-1-giulio.benetti@benettiengineering.com>
References: <20221017235602.86250-1-giulio.benetti@benettiengineering.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

According to i.MXRT1050 Reference Manual usdhc supports up to 208Mhz clock
so let's remove max-frequency property in the .dtsi base file and
in case add that property in the board specific .dts file for a specific
device connected to it.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
 arch/arm/boot/dts/imxrt1050.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
index 114465e4dde6..0b44cc4ce6ad 100644
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -93,7 +93,6 @@ usdhc1: mmc@402c0000 {
 			bus-width = <4>;
 			fsl,wp-controller;
 			no-1-8-v;
-			max-frequency = <4000000>;
 			fsl,tuning-start-tap = <20>;
 			fsl,tuning-step = <2>;
 			status = "disabled";
-- 
2.34.1