Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andrew Davis <afd@ti.com>
To:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Bryan Brattlof <bb@ti.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     Andrew Davis <afd@ti.com>
Subject: [PATCH 05/10] arm64: dts: ti: k3-am62: Enable ECAP nodes at the board level
Date:   Tue, 18 Oct 2022 16:15:28 -0500
Message-ID: <20221018211533.21335-6-afd@ti.com>
In-Reply-To: <20221018211533.21335-1-afd@ti.com>
References: <20221018211533.21335-1-afd@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

ECAP nodes defined in the top-level AM62x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information. (These and the EPWM nodes could be used to trigger internal
actions but they are not used like that currently)

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the ECAP nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi |  3 +++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts   | 12 ------------
 2 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index a0d24faa6833..a580867e68b2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -571,6 +571,7 @@ ecap0: pwm@23100000 {
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -580,6 +581,7 @@ ecap1: pwm@23110000 {
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -589,6 +591,7 @@ ecap2: pwm@23120000 {
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 4086d61807ab..197d329a6082 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -450,18 +450,6 @@ partition@3fc0000 {
 	};
 };
 
-&ecap0 {
-	status = "disabled";
-};
-
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
 &main_mcan0 {
 	status = "disabled";
 };
-- 
2.37.3