Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Vinod Koul <vkoul@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, dmaengine@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 5/5] arm64: dts: qcom: sm8450: Add GPI DMA compatible fallback
Date:   Tue, 18 Oct 2022 19:03:52 -0400
Message-Id: <20221018230352.1238479-6-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221018230352.1238479-1-krzysztof.kozlowski@linaro.org>
References: <20221018230352.1238479-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
and that drivers can bind with only one compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..e01a019d8b23 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -730,7 +730,7 @@ gcc: clock-controller@100000 {
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -1058,7 +1058,7 @@ spi21: spi@898000 {
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1394,7 +1394,7 @@ uart7: serial@99c000 {
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.34.1