Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     linux-serial@vger.kernel.org, Greg KH <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 28/44] serial: samsung_tty: Use uart_xmit_advance()
Date:   Wed, 19 Oct 2022 12:11:35 +0300
Message-Id: <20221019091151.6692-29-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20221019091151.6692-1-ilpo.jarvinen@linux.intel.com>
References: <20221019091151.6692-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Take advantage of the new uart_xmit_advance() helper.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/samsung_tty.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 77d1363029f5..7e34361a1085 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -288,7 +288,6 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	struct s3c24xx_uart_dma *dma = ourport->dma;
-	struct circ_buf *xmit = &port->state->xmit;
 	struct dma_tx_state state;
 	int count;
 
@@ -316,8 +315,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 					DMA_TO_DEVICE);
 		async_tx_ack(dma->tx_desc);
 		count = dma->tx_bytes_requested - state.residue;
-		xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
-		port->icount.tx += count;
+		uart_xmit_advance(port, count);
 	}
 
 	ourport->tx_enabled = 0;
@@ -351,8 +349,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
-	port->icount.tx += count;
+	uart_xmit_advance(port, count);
 	ourport->tx_in_progress = 0;
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -916,8 +913,7 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
 			break;
 
 		wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
+		uart_xmit_advance(port, 1);
 		count--;
 	}
 
-- 
2.30.2