Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andrew Davis <afd@ti.com>
To:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Bryan Brattlof <bb@ti.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     Andrew Davis <afd@ti.com>
Subject: [PATCH 00/12] TI J7x Disable Incomplete DT Nodes
Date:   Thu, 20 Oct 2022 11:02:53 -0500
Message-ID: <20221020160305.18711-1-afd@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hello all,

Same story as for AM64x[0] and AM62x[1], this time for J7x.

This one was a little more involved that the last 2 rounds as some IP
(like UART) are pinned out using the default pinmux. Perhaps we should be
explicit here and have pinmux nodes that simply restate the defaults. I
can go solve that in a follow up series if we think that is what we
want to do.

I have the last round for AM65x ready to post, but that involves a few
boards that I do not have (Simatic IOT2050) but would like to do some
additional re-work with, so holding off until after I get that sorted.

Thanks,
Andrew

[0] https://www.spinics.net/lists/arm-kernel/msg1018532.html
[1] https://www.spinics.net/lists/arm-kernel/msg1018864.html

Andrew Davis (12):
  arm64: dts: ti: k3-j721e: Enable UART nodes at the board level
  arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level
  arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level
  arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level
  arm64: dts: ti: k3-j7200: Enable UART nodes at the board level
  arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level
  arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level
  arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level

 .../dts/ti/k3-j7200-common-proc-board.dts     |  48 ++----
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  29 ++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |   5 +
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   |  42 +----
 .../dts/ti/k3-j721e-common-proc-board.dts     | 141 +++-------------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  55 ++++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   7 +
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 158 ++----------------
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   |  33 +---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 132 +--------------
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |  58 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |   7 +
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  98 +----------
 13 files changed, 231 insertions(+), 582 deletions(-)

-- 
2.37.3