Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sun, 23 Oct 2022 12:12:22 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Marcus Folkesson <marcus.folkesson@gmail.com>
Cc:     Mitja Spes <mitja@lxnav.com>, Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Andy Shevchenko <andy.shevchenko@gmail.com>,
        Lee Jones <lee.jones@linaro.org>,
        Mark Brown <broonie@kernel.org>,
        Uwe =?UTF-8?B?S2xlaW5lLUvDtm5pZw==?= 
        <u.kleine-koenig@pengutronix.de>,
        Tomasz Duszynski <tduszyns@gmail.com>,
        linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI
 speed to value limited
Message-ID: <20221023121222.5fe4a743@jic23-huawei>
In-Reply-To: <Y1K7hWKl0siEtaAl@gmail.com>
References: <20221021135827.1444793-1-mitja@lxnav.com>
        <20221021135827.1444793-3-mitja@lxnav.com>
        <Y1K7hWKl0siEtaAl@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Fri, 21 Oct 2022 17:32:21 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> Hi Mitja,
> 
> On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote:
> > Don't hardcode the ms5611 SPI speed, limit it instead.
> > 
> > Signed-off-by: Mitja Spes <mitja@lxnav.com>
> > ---
> >  drivers/iio/pressure/ms5611_spi.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
> > index 432e912096f4..a0a7205c9c3a 100644
> > --- a/drivers/iio/pressure/ms5611_spi.c
> > +++ b/drivers/iio/pressure/ms5611_spi.c
> > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
> >  	spi_set_drvdata(spi, indio_dev);
> >  
> >  	spi->mode = SPI_MODE_0;
> > -	spi->max_speed_hz = 20000000;
> > +	spi->max_speed_hz = min(spi->max_speed_hz, 20000000U);  
> 
> max_speed_hz is a limit, and the max frequency the ms5611 support is
> 20MHz.
Hi Marcus,

I'm not following what you are commenting on.. Perhaps give more
detail?

Thanks,

Jonathan

> 
> Best regards,
> Marcus Folkesson