Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
Message-ID: <trinity-2cabbf5f-1775-4cfd-9b6c-08e92812e998-1666548455075@3c-app-gmx-bs01>
From:   Frank Wunderlich <frank-w@public-files.de>
To:     Frank Wunderlich <frank-w@public-files.de>
Cc:     Frank Wunderlich <linux@fw-web.de>,
        linux-mediatek@lists.infradead.org,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Sam Shih <sam.shih@mediatek.com>,
        Jieyy Yang <jieyy.yang@mediatek.com>
Subject: Aw: [RFC v1 07/12] arm64: dts: mt7986: add pcie related device
 nodes
Content-Type: text/plain; charset=UTF-8
Date:   Sun, 23 Oct 2022 20:07:35 +0200
Importance: normal
Sensitivity: Normal
In-Reply-To: <trinity-ed7d279a-ec3c-41f4-95b3-8480790f82fd-1666105878851@3c-app-gmx-bap38>
References: <20221017104141.7338-1-linux@fw-web.de>
 <20221017104141.7338-8-linux@fw-web.de>
 <trinity-ed7d279a-ec3c-41f4-95b3-8480790f82fd-1666105878851@3c-app-gmx-bap38>
Precedence: bulk

Hi,

posted dt binding series here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20221023170234.83621-4-linux@fw-web.de/

my dts looks now like this:

		pcie: pcie@11280000 {
			compatible = "mediatek,mt7986-pcie",
				     "mediatek,mt8192-pcie";
			device_type = "pci";
			#address-cells = <3>;
			#size-cells = <2>;
			reg = <0x00 0x11280000 0x00 0x4000>;
			reg-names = "pcie-mac";
			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
			bus-range = <0x00 0xff>;
			ranges = <0x82000000 0x00 0x20000000 0x00
				  0x20000000 0x00 0x10000000>;
			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
				 <&infracfg CLK_INFRA_IPCIE_CK>,
				 <&infracfg CLK_INFRA_IPCIER_CK>,
				 <&infracfg CLK_INFRA_IPCIEB_CK>;
			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
			status = "disabled";

			phys = <&pcie_port PHY_TYPE_PCIE>;
			phy-names = "pcie-phy";

			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &pcie_intc 0>,
					<0 0 0 2 &pcie_intc 1>,
					<0 0 0 3 &pcie_intc 2>,
					<0 0 0 4 &pcie_intc 3>;
			pcie_intc: interrupt-controller {
				#address-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
			};
		};


will post v2 soon if this is ok...

regards Frank