Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 1/4] arm64: dts: qcom: sm8150: fix UFS PHY registers
Date:   Mon, 24 Oct 2022 11:15:04 +0200
Message-Id: <20221024091507.20342-2-johan+linaro@kernel.org>
In-Reply-To: <20221024091507.20342-1-johan+linaro@kernel.org>
References: <20221024091507.20342-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cef8c4f4f0ff..4a527a64772b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2032,11 +2032,11 @@ ufs_mem_phy: phy@1d87000 {
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
-- 
2.37.3