Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: Re: [PATCH net] net: lan966x: Stop replacing tx dcbs and dcbs_buf when
 changing MTU
From:   patchwork-bot+netdevbpf@kernel.org
Message-Id: <166667101579.1819.16740602296394570819.git-patchwork-notify@kernel.org>
Date:   Tue, 25 Oct 2022 04:10:15 +0000
References: <20221021090711.3749009-1-horatiu.vultur@microchip.com>
In-Reply-To: <20221021090711.3749009-1-horatiu.vultur@microchip.com>
To:     Horatiu Vultur <horatiu.vultur@microchip.com>
Cc:     netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
        pabeni@redhat.com, UNGLinuxDriver@microchip.com
Precedence: bulk

Hello:

This patch was applied to netdev/net.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Fri, 21 Oct 2022 11:07:11 +0200 you wrote:
> When a frame is sent using FDMA, the skb is mapped and then the mapped
> address is given to an tx dcb that is different than the last used tx
> dcb. Once the HW finish with this frame, it would generate an interrupt
> and then the dcb can be reused and memory can be freed. For each dcb
> there is an dcb buf that contains some meta-data(is used by PTP, is
> it free). There is 1 to 1 relationship between dcb and dcb_buf.
> The following issue was observed. That sometimes after changing the MTU
> to allocate new tx dcbs and dcbs_buf, two frames were not
> transmitted. The frames were not transmitted because when reloading the
> tx dcbs, it was always presuming to use the first dcb but that was not
> always happening. Because it could be that the last tx dcb used before
> changing MTU was first dcb and then when it tried to get the next dcb it
> would take dcb 1 instead of 0. Because it is supposed to take a
> different dcb than the last used one. This can be fixed simply by
> changing tx->last_in_use to -1 when the fdma is disabled to reload the
> new dcb and dcbs_buff.
> But there could be a different issue. For example, right after the frame
> is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be
> cleared. And now get the interrupt from HW that it finished with the
> frame. So when we try to clear the skb, it is not possible because we
> lost all the dcbs_buf.
> The solution here is to stop replacing the tx dcbs and dcbs_buf when
> changing MTU because the TX doesn't care what is the MTU size, it is
> only the RX that needs this information.
> 
> [...]

Here is the summary with links:
  - [net] net: lan966x: Stop replacing tx dcbs and dcbs_buf when changing MTU
    https://git.kernel.org/netdev/net/c/4a4b6848d1e9

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html